lkml.org 
[lkml]   [2008]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 32/32] ide-tape: cleanup the remaining codestyle issues
Date
From: Borislav Petkov <bbpetkov@yahoo.de>

Which is, in particular:
- reorganize #defines at the top
- whitespace cleanup
- remove the "!= NULL" chuck from the pointer validity tests since the short
version "if (ptr)" is more intuitive
- fix comments
- remove unused "length" arg from idetape_create_read_buffer_cmd()
- shorten some vars in order to fit lines into 80 columns.
- include proper headers
- finally, bump driver version

thus decreasing checkpatch errors to 0.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
---
drivers/ide/ide-tape.c | 1525 ++++++++++++++++++++++++------------------------
1 files changed, 758 insertions(+), 767 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 424879d..f51712c 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -15,7 +15,7 @@
* Documentation/ide/ChangeLog.ide-tape.1995-2002
*/

-#define IDETAPE_VERSION "1.19"
+#define IDETAPE_VERSION "1.20"

#include <linux/module.h>
#include <linux/types.h>
@@ -39,34 +39,12 @@
#include <scsi/scsi.h>

#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <asm/unaligned.h>
#include <linux/mtio.h>

-/**************************** Tunable parameters *****************************/
-
-
-/*
- * Pipelined mode parameters.
- *
- * We try to use the minimum number of stages which is enough to
- * keep the tape constantly streaming. To accomplish that, we implement
- * a feedback loop around the maximum number of stages:
- *
- * We start from MIN maximum stages (we will not even use MIN stages
- * if we don't need them), increment it by RATE*(MAX-MIN)
- * whenever we sense that the pipeline is empty, until we reach
- * the optimum value or until we reach MAX.
- *
- * Setting the following parameter to 0 is illegal: the pipelined mode
- * cannot be disabled (idetape_calculate_speeds() divides by
- * tape->max_stages.)
- */
-#define IDETAPE_MIN_PIPELINE_STAGES 1
-#define IDETAPE_MAX_PIPELINE_STAGES 400
-#define IDETAPE_INCREASE_STAGES_RATE 20

enum {
DBG_ERR = (1 << 0),
@@ -90,17 +68,34 @@ enum {
#endif

/*
- * After each failed packet command we issue a request sense command
- * and retry the packet command IDETAPE_MAX_PC_RETRIES times.
+ * Tunable parameters:
+ *
+ * Pipelined mode parameters.
+ *
+ * We try to use the minimum number of stages which is enough to keep the tape
+ * constantly streaming. To accomplish that, we implement a feedback loop around
+ * the maximum number of stages:
+ *
+ * We start from MIN maximum stages (we will not even use MIN stages if we don't
+ * need them), increment it by RATE*(MAX-MIN) whenever we sense that the
+ * pipeline is empty, until we reach the optimum value or until we reach MAX.
*
- * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
+ * Setting the following parameter to 0 is illegal: the pipelined mode cannot be
+ * disabled (idetape_calculate_speeds() divides by tape->max_stages.)
+ */
+#define IDETAPE_MIN_PPL_STAGES 1
+#define IDETAPE_MAX_PPL_STAGES 400
+#define IDETAPE_INCREASE_STAGES_RATE 20
+
+/*
+ * After each failed packet command we issue a request sense command and retry
+ * the packet command IDETAPE_MAX_PC_RETRIES times. Set it to 0 to disable.
*/
#define IDETAPE_MAX_PC_RETRIES 3

/*
- * With each packet command, we allocate a buffer of
- * IDETAPE_PC_BUFFER_SIZE bytes. This is used for several packet
- * commands (Not for READ/WRITE commands).
+ * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE
+ * bytes. (Used for several packet commands but not for READ/WRITE commands).
*/
#define IDETAPE_PC_BUFFER_SIZE 256

@@ -112,48 +107,40 @@ enum {
#define IDETAPE_WAIT_CMD (900*HZ)

/*
- * The following parameter is used to select the point in the internal
- * tape fifo in which we will start to refill the buffer. Decreasing
- * the following parameter will improve the system's latency and
- * interactive response, while using a high value might improve system
- * throughput.
+ * The following parameter is used to select the point in the internal tape fifo
+ * in which we will start to refill the buffer. Decreasing the following
+ * parameter will improve the system's latency and interactive response, while
+ * using a high value might improve system throughput.
*/
-#define IDETAPE_FIFO_THRESHOLD 2
+#define IDETAPE_FIFO_THRESHOLD 2

/*
- * DSC polling parameters.
- *
- * Polling for DSC (a single bit in the status register) is a very
- * important function in ide-tape. There are two cases in which we
- * poll for DSC:
+ * DSC polling parameters.
*
- * 1. Before a read/write packet command, to ensure that we
- * can transfer data from/to the tape's data buffers, without
- * causing an actual media access. In case the tape is not
- * ready yet, we take out our request from the device
- * request queue, so that ide.c will service requests from
- * the other device on the same interface meanwhile.
+ * Polling for DSC (a single bit in the status register) is a very important
+ * function in ide-tape. There are two cases in which we poll for DSC:
*
- * 2. After the successful initialization of a "media access
- * packet command", which is a command which can take a long
- * time to complete (it can be several seconds or even an hour).
+ * 1. Before a read/write packet command, to ensure that we can transfer data
+ * from/to the tape's data buffers, without causing an actual media access.
+ * In case the tape is not ready yet, we take out our request from the device
+ * request queue, so that ide.c could service requests from the other device
+ * on the same interface in the meantime.
*
- * Again, we postpone our request in the middle to free the bus
- * for the other device. The polling frequency here should be
- * lower than the read/write frequency since those media access
- * commands are slow. We start from a "fast" frequency -
- * IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC
- * after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a
- * lower frequency - IDETAPE_DSC_MA_SLOW (1 minute).
+ * 2. After the successful initialization of a "media access packet command",
+ * which is a command that can take a long time to complete (the interval can
+ * range from several seconds to even an hour).
*
- * We also set a timeout for the timer, in case something goes wrong.
- * The timeout should be longer then the maximum execution time of a
- * tape operation.
- */
-
-/*
- * DSC timings.
+ * Again, we postpone our request in the middle to free the bus for the other
+ * device. The polling frequency here should be lower than the read/write
+ * frequency since those media access commands are slow. We start from a "fast"
+ * frequency - IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC
+ * after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a lower frequency
+ * - IDETAPE_DSC_MA_SLOW (1 minute). We also set a timeout for the timer, in
+ * case something goes wrong. The timeout should be longer then the maximum
+ * execution time of a tape operation.
*/
+
+/* DSC timings. */
#define IDETAPE_DSC_RW_MIN 5*HZ/100 /* 50 msec */
#define IDETAPE_DSC_RW_MAX 40*HZ/100 /* 400 msec */
#define IDETAPE_DSC_RW_TIMEOUT 2*60*HZ /* 2 minutes */
@@ -162,17 +149,12 @@ enum {
#define IDETAPE_DSC_MA_SLOW 30*HZ /* 30 seconds */
#define IDETAPE_DSC_MA_TIMEOUT 2*60*60*HZ /* 2 hours */

-/*************************** End of tunable parameters ***********************/
+/* End of tunable parameters */

-/*
- * Read/Write error simulation
- */
+/* Read/Write error simulation */
#define SIMULATE_ERRORS 0

-/*
- * For general magnetic tape device compatibility.
- */
-
+/* For general magnetic tape device compatibility. */
/* tape directions */
typedef enum {
idetape_dir_none,
@@ -223,9 +205,7 @@ enum {
PC_FL_WRITING = (1 << 5),
};

-/*
- * A pipeline stage.
- */
+/* A pipeline stage. */
typedef struct idetape_stage_s {
struct request rq; /* The corresponding request */
struct idetape_bh *bh; /* The data buffers */
@@ -320,7 +300,7 @@ typedef struct ide_tape_obj {
/* active data request */
struct request *act_data_rq;
/* Data buffer size chosen based on the tape's recommendation */
- int stage_size;
+ int stage_sz;
idetape_stage_t *merge_stage;
int merge_stage_sz;
struct idetape_bh *bh;
@@ -418,7 +398,7 @@ typedef struct ide_tape_obj {
/* restart speed control req */
int rs_speed_ctl_rq;

- u32 debug_level;
+ u32 debug_level;
} idetape_tape_t;

static DEFINE_MUTEX(idetape_ref_mutex);
@@ -451,9 +431,7 @@ static void ide_tape_put(struct ide_tape_obj *tape)
mutex_unlock(&idetape_ref_mutex);
}

-/*
- * Tape door status
- */
+/* Tape door status */
#define DOOR_UNLOCKED 0
#define DOOR_LOCKED 1
#define DOOR_EXPLICITLY_LOCKED 2
@@ -479,32 +457,24 @@ enum {
IDETAPE_FL_MEDIUM_PRESENT = (1 << 8),
};

-/*
- * Some defines for the READ BUFFER command
- */
+/* define for the READ BUFFER command */
#define IDETAPE_RETRIEVE_FAULTY_BLOCK 6

-/*
- * Some defines for the SPACE command
- */
+/* defines for the SPACE command */
#define IDETAPE_SPACE_OVER_FILEMARK 1
#define IDETAPE_SPACE_TO_EOD 3

-/*
- * Some defines for the LOAD UNLOAD command
- */
+/* defines for the LOAD UNLOAD command */
#define IDETAPE_LU_LOAD_MASK 1
#define IDETAPE_LU_RETENSION_MASK 2
#define IDETAPE_LU_EOT_MASK 4

/*
- * Special requests for our block device strategy routine.
+ * Special requests for our block device strategy routine.
*
- * In order to service a character device command, we add special
- * requests to the tail of our block device request queue and wait
- * for their completion.
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
*/
-
enum {
REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
@@ -513,19 +483,16 @@ enum {
REQ_IDETAPE_READ_BUFFER = (1 << 4),
};

-/*
- * Error codes which are returned in rq->errors to the higher part
- * of the driver.
- */
+/* Error codes returned in rq->errors to the higher part of the driver. */
#define IDETAPE_ERROR_GENERAL 101
#define IDETAPE_ERROR_FILEMARK 102
#define IDETAPE_ERROR_EOD 103

/*
- * The following is used to format the general configuration word of
- * the ATAPI IDENTIFY DEVICE command.
+ * Used to format the general configuration word of the ATAPI IDENTIFY DEVICE
+ * command.
*/
-struct idetape_id_gcw {
+struct idetape_id_gcw {
unsigned packet_size :2; /* Packet Size */
unsigned reserved234 :3; /* Reserved */
unsigned drq_type :2; /* Command packet DRQ type */
@@ -540,10 +507,10 @@ struct idetape_id_gcw {
#define IDETAPE_CAPABILITIES_PAGE 0x2a

/*
- * The variables below are used for the character device interface.
- * Additional state variables are defined in our ide_drive_t structure.
+ * The variables below are used for the character device interface. Additional
+ * state variables are defined in our ide_drive_t structure.
*/
-static struct ide_tape_obj * idetape_devs[MAX_HWIFS * MAX_DRIVES];
+static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];

#define ide_tape_f(file) ((file)->private_data)

@@ -559,37 +526,36 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
return tape;
}

-/*
- * Function declarations
- *
- */
-static int idetape_chrdev_release (struct inode *inode, struct file *filp);
-static void idetape_write_release (ide_drive_t *drive, unsigned int minor);
+static int idetape_chrdev_release(struct inode *inode, struct file *filp);
+static void idetape_write_release(ide_drive_t *drive, unsigned int minor);

/*
* Too bad. The drive wants to send us data which we are not ready to accept.
* Just throw it away.
*/
-static void idetape_discard_data (ide_drive_t *drive, unsigned int bcount)
+static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount)
{
while (bcount--)
(void) HWIF(drive)->INB(IDE_DATA_REG);
}

-static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount)
+static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+ uint bcount)
{
struct idetape_bh *bh = pc->bh;
int count;

while (bcount) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_input_buffers\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
idetape_discard_data(drive, bcount);
return;
}
- count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount);
- HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count);
+ count = min((uint)(bh->b_size - atomic_read(&bh->b_count)),
+ bcount);
+ HWIF(drive)->atapi_input_bytes(drive,
+ bh->b_data + atomic_read(&bh->b_count), count);
bcount -= count;
atomic_add(count, &bh->b_count);
if (atomic_read(&bh->b_count) == bh->b_size) {
@@ -601,24 +567,26 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne
pc->bh = bh;
}

-static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount)
+static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+ uint bcount)
{
struct idetape_bh *bh = pc->bh;
int count;

while (bcount) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_output_buffers\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
return;
}
- count = min((unsigned int)pc->b_count, (unsigned int)bcount);
+ count = min((uint)pc->b_count, (uint)bcount);
HWIF(drive)->atapi_output_bytes(drive, pc->b_data, count);
bcount -= count;
pc->b_data += count;
pc->b_count -= count;
if (!pc->b_count) {
- pc->bh = bh = bh->b_reqnext;
+ bh = bh->b_reqnext;
+ pc->bh = bh->b_reqnext;
if (bh) {
pc->b_data = bh->b_data;
pc->b_count = atomic_read(&bh->b_count);
@@ -627,7 +595,7 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign
}
}

-static void idetape_update_buffers (idetape_pc_t *pc)
+static void idetape_update_buffers(idetape_pc_t *pc)
{
struct idetape_bh *bh = pc->bh;
int count;
@@ -637,11 +605,11 @@ static void idetape_update_buffers (idetape_pc_t *pc)
return;
while (bcount) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_update_buffers\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
return;
}
- count = min((unsigned int)bh->b_size, (unsigned int)bcount);
+ count = min((uint)bh->b_size, (uint)bcount);
atomic_set(&bh->b_count, count);
if (atomic_read(&bh->b_count) == bh->b_size)
bh = bh->b_reqnext;
@@ -658,7 +626,6 @@ static idetape_pc_t *ide_tape_alloc_pc(void)
if (!pc)
printk(KERN_ERR "ide-tape: %s: memory allocation error.",
__func__);
-
return pc;
}

@@ -674,14 +641,10 @@ static struct request *ide_tape_alloc_rq(void)
if (!rq)
printk(KERN_ERR "ide-tape: %s: memory allocation error.",
__func__);
-
return rq;
}

-/*
- * idetape_init_pc initializes a packet command.
- */
-static void idetape_init_pc (idetape_pc_t *pc)
+static void idetape_init_pc(idetape_pc_t *pc)
{
memset(pc->c, 0, 12);
pc->retries = 0;
@@ -777,17 +740,14 @@ static void idetape_activate_next_stage(ide_drive_t *drive)
tape->next_stage = stage->next;
}

-/*
- * idetape_kfree_stage calls kfree to completely free a stage, along with
- * its related buffers.
- */
-static void __idetape_kfree_stage (idetape_stage_t *stage)
+/* kfree a stage completely, along with its related buffers. */
+static void __idetape_kfree_stage(idetape_stage_t *stage)
{
struct idetape_bh *prev_bh, *bh = stage->bh;
int size;

- while (bh != NULL) {
- if (bh->b_data != NULL) {
+ while (bh) {
+ if (bh->b_data) {
size = (int) bh->b_size;
while (size > 0) {
free_page((unsigned long) bh->b_data);
@@ -802,16 +762,16 @@ static void __idetape_kfree_stage (idetape_stage_t *stage)
kfree(stage);
}

-static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage)
+static void idetape_kfree_stage(idetape_tape_t *tape, idetape_stage_t *stage)
{
__idetape_kfree_stage(stage);
}

/*
- * idetape_remove_stage_head removes tape->first_stage from the pipeline.
- * The caller should avoid race conditions.
+ * remove tape->first_stage from the pipeline. The caller should avoid race
+ * conditions.
*/
-static void idetape_remove_stage_head (ide_drive_t *drive)
+static void idetape_remove_stage_head(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_stage_t *stage;
@@ -833,10 +793,12 @@ static void idetape_remove_stage_head (ide_drive_t *drive)
tape->nr_stages--;
if (tape->first_stage == NULL) {
tape->last_stage = NULL;
- if (tape->next_stage != NULL)
- printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n");
+ if (tape->next_stage)
+ printk(KERN_ERR
+ "ide-tape: bug: tape->next_stage != NULL\n");
if (tape->nr_stages)
- printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n");
+ printk(KERN_ERR
+ "ide-tape: bug: nr_stages should be 0 now\n");
}
}

@@ -867,8 +829,8 @@ static void idetape_abort_pipeline(ide_drive_t *drive,
}

/*
- * idetape_end_request is used to finish servicing a request, and to
- * insert a pending pipeline request into the main device queue.
+ * finish servicing a request and insert a pending pipeline request into
+ * the main device queue.
*/
static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
{
@@ -882,10 +844,11 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
debug_log(DBG_PROCS, "Enter %s\n", __func__);

switch (uptodate) {
- case 0: error = IDETAPE_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
+ case 0: error = IDETAPE_ERROR_GENERAL; break;
+ case 1: error = 0; break;
+ default: error = uptodate;
}
+
rq->errors = error;
if (error)
tape->failed_pc = NULL;
@@ -908,7 +871,8 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
if (error) {
tape->flags |= IDETAPE_FL_PIPELINE_ERR;
if (error == IDETAPE_ERROR_EOD)
- idetape_abort_pipeline(drive, active_stage);
+ idetape_abort_pipeline(drive,
+ active_stage);
}
} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
if (error == IDETAPE_ERROR_EOD) {
@@ -916,12 +880,10 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
idetape_abort_pipeline(drive, active_stage);
}
}
- if (tape->next_stage != NULL) {
+ if (tape->next_stage) {
idetape_activate_next_stage(drive);

- /*
- * Insert the next request into the request queue.
- */
+ /* Insert the next request into the request queue. */
(void) ide_do_drive_cmd(drive, tape->act_data_rq,
ide_end);
} else if (!error) {
@@ -955,7 +917,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
return 0;
}

-static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;

@@ -965,15 +927,16 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
idetape_analyze_error(drive, tape->pc->buffer);
idetape_end_request(drive, 1, 0);
} else {
- printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n");
+ printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself"
+ " - Aborting request!\n");
idetape_end_request(drive, 0, 0);
}
return ide_stopped;
}

-static void idetape_create_request_sense_cmd (idetape_pc_t *pc)
+static void idetape_create_request_sense_cmd(idetape_pc_t *pc)
{
- idetape_init_pc(pc);
+ idetape_init_pc(pc);
pc->c[0] = REQUEST_SENSE;
pc->c[4] = 20;
pc->rq_xfer = 20;
@@ -988,21 +951,21 @@ static void idetape_init_rq(struct request *rq, u8 cmd)
}

/*
- * idetape_queue_pc_head generates a new packet command request in front
- * of the request queue, before the current request, so that it will be
- * processed immediately, on the next pass through the driver.
+ * generate a new packet command request in front of the request queue, before
+ * the current request, so that it will be processed immediately, on the next
+ * pass through the driver.
*
- * idetape_queue_pc_head is called from the request handling part of
- * the driver (the "bottom" part). Safe storage for the request should
- * be allocated with ide_tape_alloc_pc and ide_tape_alloc_rq
- * before calling idetape_queue_pc_head.
+ * idetape_queue_pc_head() is called from the request handling part of the
+ * driver (the "bottom" part). Safe storage for the request should be allocated
+ * with ide_tape_alloc_pc and ide_tape_alloc_rq before calling the function
+ * below.
*
- * The higher level of the driver - The ioctl handler and the character
- * device handling functions should queue request to the lower level part
- * and wait for their completion using idetape_queue_pc_tail or
- * idetape_queue_rw_tail.
+ * The higher level of the driver - The ioctl handler and the character device
+ * handling functions should queue request to the lower level part and wait for
+ * their completion using idetape_queue_pc_tail() or idetape_queue_rw_tail().
*/
-static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct request *rq)
+static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc,
+ struct request *rq)
{
struct ide_tape_obj *tape = drive->driver_data;

@@ -1041,11 +1004,10 @@ static ide_startstop_t idetape_retry_pc(ide_drive_t *drive)
}

/*
- * idetape_postpone_request postpones the current request so that
- * ide.c will be able to service requests from another device on
- * the same hwgroup while we are polling for DSC.
+ * postpone the current request so that ide.c will be able to service requests
+ * from another device on the same hwgroup while we are polling for DSC.
*/
-static void idetape_postpone_request (ide_drive_t *drive)
+static void idetape_postpone_request(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;

@@ -1074,7 +1036,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
idetape_io_buf *iobuf;
unsigned int temp;
#if SIMULATE_ERRORS
- static int error_sim_count = 0;
+ static int error_sim_count;
#endif
u16 bcount;
u8 stat, ireason;
@@ -1235,46 +1197,39 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
}

/*
- * Packet Command Interface
- *
- * The current Packet Command is available in tape->pc, and will not
- * change until we finish handling it. Each packet command is associated
- * with a callback function that will be called when the command is
- * finished.
+ * Packet Command Interface
*
- * The handling will be done in three stages:
+ * The current Packet Command is available in tape->pc, and will not change
+ * until we finish handling it. Each packet command is associated with a
+ * callback function that will be called when the command is finished.
*
- * 1. idetape_issue_pc will send the packet command to the
- * drive, and will set the interrupt handler to idetape_pc_intr.
+ * The handling will be done in three stages:
*
- * 2. On each interrupt, idetape_pc_intr will be called. This step
- * will be repeated until the device signals us that no more
- * interrupts will be issued.
+ * 1. idetape_issue_pc() will send the packet command to the drive, and will set
+ * the interrupt handler to idetape_pc_intr().
*
- * 3. ATAPI Tape media access commands have immediate status with a
- * delayed process. In case of a successful initiation of a
- * media access packet command, the DSC bit will be set when the
- * actual execution of the command is finished.
- * Since the tape drive will not issue an interrupt, we have to
- * poll for this event. In this case, we define the request as
- * "low priority request" by setting rq_status to
- * IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and exit
- * the driver.
+ * 2. On each interrupt, idetape_pc_intr() will be called. This step will be
+ * repeated until the device signals us that no more interrupts will be issued.
*
- * ide.c will then give higher priority to requests which
- * originate from the other device, until will change rq_status
- * to RQ_ACTIVE.
+ * 3. ATAPI Tape media access commands have immediate status with a delayed
+ * process. In case of a successful initiation of a media access packet command,
+ * the DSC bit will be set when the actual execution of the command is finished.
+ * Since the tape drive will not issue an interrupt, we have to poll for this
+ * event. In this case, we define the request as "low priority request" by
+ * setting rq_status to IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and
+ * exit the driver.
+ * ide.c will then give higher priority to requests which originate from the
+ * other device, until we change rq_status to RQ_ACTIVE.
*
- * 4. When the packet command is finished, it will be checked for errors.
+ * 4.When the packet command is finished, it will be checked for errors.
*
- * 5. In case an error was found, we queue a request sense packet
- * command in front of the request queue and retry the operation
- * up to IDETAPE_MAX_PC_RETRIES times.
- *
- * 6. In case no error was found, or we decided to give up and not
- * to retry again, the callback function will be called and then
- * we will handle the next request.
+ * 5. In case an error was found, we queue a request sense packet command in
+ * front of the request queue and retry the operation up to
+ * IDETAPE_MAX_PC_RETRIES times.
*
+ * 6. In case no error was found, or we decided to give up and not to retry
+ * again, the callback function will be called and then we will handle the next
+ * request.
*/
static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
{
@@ -1285,8 +1240,9 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
ide_startstop_t startstop;
u8 ireason;

- if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
- printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
+ if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ printk(KERN_ERR "ide-tape: Strange, packet command initiated"
+ " yet DRQ isn't asserted\n");
return startstop;
}
ireason = hwif->INB(IDE_IREASON_REG);
@@ -1329,7 +1285,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
if (tape->pc->c[0] == REQUEST_SENSE &&
pc->c[0] == REQUEST_SENSE) {
printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
- "Two request sense in serial were issued\n");
+ "two request sense in serial were issued\n");
}

if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
@@ -1384,7 +1340,8 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
if (dma_ok) /* Will begin DMA later */
pc->flags |= PC_FL_DMA_IN_PROGRESS;
if (tape->flags & IDETAPE_FL_DRQ_INTERRUPT) {
- ide_set_handler(drive, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL);
+ ide_set_handler(drive, &idetape_transfer_pc, IDETAPE_WAIT_CMD,
+ NULL);
hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
return ide_started;
} else {
@@ -1393,10 +1350,8 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
}
}

-/*
- * General packet command callback function.
- */
-static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
+/* General packet command callback function. */
+static ide_startstop_t idetape_pc_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;

@@ -1406,25 +1361,25 @@ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
return ide_stopped;
}

-/*
- * A mode sense command is used to "sense" tape parameters.
- */
-static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
+/* A mode sense command is used to "sense" tape parameters. */
+static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code)
{
idetape_init_pc(pc);
pc->c[0] = MODE_SENSE;
if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
- pc->c[1] = 8; /* DBD = 1 - Don't return block descriptors */
+ /* DBD = 1 - Don't return block descriptors */
+ pc->c[1] = 8;
pc->c[2] = page_code;
/*
* Changed pc->c[3] to 0 (255 will at best return unused info).
*
- * For SCSI this byte is defined as subpage instead of high byte
- * of length and some IDE drives seem to interpret it this way
- * and return an error when 255 is used.
+ * For SCSI this byte is defined as subpage instead of high byte of
+ * length and some IDE drives seem to interpret it this way and return
+ * an error when 255 is used.
*/
pc->c[3] = 0;
- pc->c[4] = 255; /* (We will just discard data in that case) */
+ /* We will just discard data in that case */
+ pc->c[4] = 255;
if (page_code == IDETAPE_BLOCK_DESCRIPTOR)
pc->rq_xfer = 12;
else if (page_code == IDETAPE_CAPABILITIES_PAGE)
@@ -1453,7 +1408,7 @@ static void idetape_calculate_speeds(ide_drive_t *drive)
(tape->pipeline_head - tape->ctl_prev_pipe_h) * 32 *
HZ / (jiffies - tape->ctl_prev_htime);

- if (tape->nr_pending_stages < tape->max_stages /*- 1 */) {
+ if (tape->nr_pending_stages < tape->max_stages/*- 1 */) {
/* -1 for read mode error recovery */
if (time_after(jiffies, tape->unctl_prev_htime + 10 * HZ)) {
tape->unctl_pipe_htime = jiffies;
@@ -1487,7 +1442,7 @@ static void idetape_calculate_speeds(ide_drive_t *drive)
tape->max_ins_speed = max(tape->max_ins_speed, 500);
}

-static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive)
+static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->pc;
@@ -1513,7 +1468,7 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive)
return pc->callback(drive);
}

-static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_rw_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
@@ -1549,23 +1504,25 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
return ide_stopped;
}

-static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+ uint len, struct idetape_bh *bh)
{
idetape_init_pc(pc);
pc->c[0] = READ_6;
- put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
+ put_unaligned(cpu_to_be32(len), (uint *) &pc->c[1]);
pc->c[1] = 1;
pc->callback = &idetape_rw_callback;
pc->bh = bh;
atomic_set(&bh->b_count, 0);
pc->buffer = NULL;
- pc->buf_size = length * tape->blk_sz;
+ pc->buf_size = len * tape->blk_sz;
pc->rq_xfer = pc->buf_size;
- if (pc->rq_xfer == tape->stage_size)
+ if (pc->rq_xfer == tape->stage_sz)
pc->flags |= PC_FL_DMA_RECOMMENDED;
}

-static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_read_buffer_cmd(idetape_tape_t *tape,
+ idetape_pc_t *pc, struct idetape_bh *bh)
{
int size = 32768;
struct idetape_bh *p = bh;
@@ -1583,14 +1540,16 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p
atomic_set(&p->b_count, 0);
p = p->b_reqnext;
}
- pc->rq_xfer = pc->buf_size = size;
+ pc->rq_xfer = size;
+ pc->buf_size = size;
}

-static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+ uint len, struct idetape_bh *bh)
{
idetape_init_pc(pc);
pc->c[0] = WRITE_6;
- put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
+ put_unaligned(cpu_to_be32(len), (uint *) &pc->c[1]);
pc->c[1] = 1;
pc->callback = &idetape_rw_callback;
pc->flags |= PC_FL_WRITING;
@@ -1598,14 +1557,13 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
pc->b_data = bh->b_data;
pc->b_count = atomic_read(&bh->b_count);
pc->buffer = NULL;
- pc->rq_xfer = pc->buf_size = length * tape->blk_sz;
- if (pc->rq_xfer == tape->stage_size)
+ pc->rq_xfer = len * tape->blk_sz;
+ pc->buf_size = len * tape->blk_sz;
+ if (pc->rq_xfer == tape->stage_sz)
pc->flags |= PC_FL_DMA_RECOMMENDED;
}

-/*
- * idetape_do_request is our request handling function.
- */
+/* our request handler */
static ide_startstop_t idetape_do_request(ide_drive_t *drive,
struct request *rq, sector_t block)
{
@@ -1619,23 +1577,18 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
rq->sector, rq->nr_sectors, rq->current_nr_sectors);

if (!blk_special_request(rq)) {
- /*
- * We do not support buffer cache originated requests.
- */
+ /* We do not support buffer cache originated requests. */
printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
"request queue (%d)\n", drive->name, rq->cmd_type);
ide_end_request(drive, 0, 0);
return ide_stopped;
}

- /*
- * Retry a failed packet command
- */
- if (tape->failed_pc != NULL &&
- tape->pc->c[0] == REQUEST_SENSE) {
+ /* Retry a failed packet command */
+ if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE)
return idetape_issue_pc(drive, tape->failed_pc);
- }
- if (postponed_rq != NULL)
+
+ if (postponed_rq)
if (rq != postponed_rq) {
printk(KERN_ERR "ide-tape: ide-tape.c bug - "
"Two DSC requests were queued\n");
@@ -1678,7 +1631,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
} else {
return ide_do_reset(drive);
}
- } else if (time_after(jiffies, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD))
+ } else if (time_after(jiffies, tape->dsc_polling_start +
+ IDETAPE_DSC_MA_THRESHOLD))
tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
idetape_postpone_request(drive);
return ide_stopped;
@@ -1711,7 +1665,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
if (!pc)
goto err;

- idetape_create_read_buffer_cmd(tape, pc, rq->current_nr_sectors,
+ idetape_create_read_buffer_cmd(tape, pc,
(struct idetape_bh *)rq->special);
goto out;
}
@@ -1735,10 +1689,8 @@ err:
return ide_stopped;
}

-/*
- * Pipeline related functions
- */
-static inline int idetape_pipeline_active (idetape_tape_t *tape)
+/* Pipeline related functions */
+static inline int idetape_pipeline_active(idetape_tape_t *tape)
{
int rc1, rc2;

@@ -1748,25 +1700,26 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape)
}

/*
- * idetape_kmalloc_stage uses __get_free_page to allocate a pipeline
- * stage, along with all the necessary small buffers which together make
- * a buffer of size tape->stage_size (or a bit more). We attempt to
- * combine sequential pages as much as possible.
+ * use __get_free_page() to allocate a pipeline stage, along with all the
+ * necessary small buffers which together make a buffer of size tape->stage_sz
+ * (or a bit more). We attempt to combine sequential pages as much as possible.
*
- * Returns a pointer to the new allocated stage, or NULL if we
- * can't (or don't want to) allocate a stage.
+ * we return a pointer to the new allocated stage, or NULL if we can't (or don't
+ * want to) allocate a stage.
*
- * Pipeline stages are optional and are used to increase performance.
- * If we can't allocate them, we'll manage without them.
+ * pipeline stages are optional and are used to increase performance. If we
+ * can't allocate them, we'll manage without them.
*/
-static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, int clear)
+static idetape_stage_t *__idetape_kmalloc_stage(idetape_tape_t *tape, int full,
+ int clear)
{
idetape_stage_t *stage;
struct idetape_bh *prev_bh, *bh;
int pages = tape->pages_per_stage;
char *b_data = NULL;

- if ((stage = kmalloc(sizeof (idetape_stage_t),GFP_KERNEL)) == NULL)
+ stage = kmalloc(sizeof(idetape_stage_t), GFP_KERNEL);
+ if (!stage)
return NULL;
stage->next = NULL;

@@ -1774,16 +1727,21 @@ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full,
if (bh == NULL)
goto abort;
bh->b_reqnext = NULL;
- if ((bh->b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL)
+
+ bh->b_data = (char *) __get_free_page(GFP_KERNEL);
+ if (!bh->b_data)
goto abort;
+
if (clear)
memset(bh->b_data, 0, PAGE_SIZE);
bh->b_size = PAGE_SIZE;
atomic_set(&bh->b_count, full ? bh->b_size : 0);

while (--pages) {
- if ((b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL)
+ b_data = (char *) __get_free_page(GFP_KERNEL);
+ if (!b_data)
goto abort;
+
if (clear)
memset(b_data, 0, PAGE_SIZE);
if (bh->b_data == b_data + PAGE_SIZE) {
@@ -1800,8 +1758,9 @@ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full,
continue;
}
prev_bh = bh;
- if ((bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL)) == NULL) {
- free_page((unsigned long) b_data);
+ bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+ if (!bh) {
+ free_page((ulong) b_data);
goto abort;
}
bh->b_reqnext = NULL;
@@ -1819,7 +1778,7 @@ abort:
return NULL;
}

-static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape)
+static idetape_stage_t *idetape_kmalloc_stage(idetape_tape_t *tape)
{
idetape_stage_t *cache_stage = tape->cache_stage;

@@ -1827,14 +1786,15 @@ static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape)

if (tape->nr_stages >= tape->max_stages)
return NULL;
- if (cache_stage != NULL) {
+ if (cache_stage) {
tape->cache_stage = NULL;
return cache_stage;
}
return __idetape_kmalloc_stage(tape, 0, 0);
}

-static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *stage, const char __user *buf, int n)
+static int idetape_copy_stage_from_user(idetape_tape_t *tape,
+ idetape_stage_t *stage, const char __user *buf, int n)
{
struct idetape_bh *bh = tape->bh;
int count;
@@ -1842,13 +1802,16 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *

while (n) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_copy_stage_from_user\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
return 1;
}
- count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n);
- if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count))
+ count = min((uint)(bh->b_size - atomic_read(&bh->b_count)),
+ (uint)n);
+ if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
+ count))
ret = 1;
+
n -= count;
atomic_add(count, &bh->b_count);
buf += count;
@@ -1862,7 +1825,8 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *
return ret;
}

-static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, idetape_stage_t *stage, int n)
+static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
+ idetape_stage_t *stage, int n)
{
struct idetape_bh *bh = tape->bh;
int count;
@@ -1870,8 +1834,8 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i

while (n) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_copy_stage_to_user\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
return 1;
}
count = min(tape->b_count, n);
@@ -1882,7 +1846,8 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i
tape->b_count -= count;
buf += count;
if (!tape->b_count) {
- tape->bh = bh = bh->b_reqnext;
+ tape->bh = bh->b_reqnext;
+ bh = bh->b_reqnext;
if (bh) {
tape->b_data = bh->b_data;
tape->b_count = atomic_read(&bh->b_count);
@@ -1892,10 +1857,10 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i
return ret;
}

-static void idetape_init_merge_stage (idetape_tape_t *tape)
+static void idetape_init_merge_stage(idetape_tape_t *tape)
{
struct idetape_bh *bh = tape->merge_stage->bh;
-
+
tape->bh = bh;
if (tape->chrdev_dir == idetape_dir_write)
atomic_set(&bh->b_count, 0);
@@ -1905,7 +1870,7 @@ static void idetape_init_merge_stage (idetape_tape_t *tape)
}
}

-static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage)
+static void idetape_switch_buffers(idetape_tape_t *tape, idetape_stage_t *stage)
{
struct idetape_bh *tmp;

@@ -1915,10 +1880,8 @@ static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage
idetape_init_merge_stage(tape);
}

-/*
- * idetape_add_stage_tail adds a new stage at the end of the pipeline.
- */
-static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
+/* add a new stage at the end of the pipeline. */
+static void idetape_add_stage_tail(ide_drive_t *drive, idetape_stage_t *stage)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
@@ -1927,10 +1890,11 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)

spin_lock_irqsave(&tape->que_lock, flags);
stage->next = NULL;
- if (tape->last_stage != NULL)
- tape->last_stage->next=stage;
+ if (tape->last_stage)
+ tape->last_stage->next = stage;
else
- tape->first_stage = tape->next_stage=stage;
+ tape->first_stage = stage;
+ tape->next_stage = stage;
tape->last_stage = stage;
if (tape->next_stage == NULL)
tape->next_stage = tape->last_stage;
@@ -1940,19 +1904,18 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
}

/*
- * idetape_wait_for_request installs a completion in a pending request
- * and sleeps until it is serviced.
- *
- * The caller should ensure that the request will not be serviced
- * before we install the completion (usually by disabling interrupts).
+ * install a completion in a pending request and sleep until it is serviced. The
+ * caller should ensure that the request will not be serviced before we install
+ * the completion (usually by disabling interrupts).
*/
-static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
+static void idetape_wait_for_request(ide_drive_t *drive, struct request *rq)
{
DECLARE_COMPLETION_ONSTACK(wait);
idetape_tape_t *tape = drive->driver_data;

if (rq == NULL || !blk_special_request(rq)) {
- printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n");
+ printk(KERN_ERR "ide-tape: bug: Trying to sleep on non-valid"
+ " request\n");
return;
}
rq->end_io_data = &wait;
@@ -2000,14 +1963,11 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
}

/*
- * idetape_create_write_filemark_cmd will:
- *
- * 1. Write a filemark if write_filemark=1.
- * 2. Flush the device buffers without writing a filemark
- * if write_filemark=0.
- *
+ * Write a filemark if write_filemark=1. Then, flush the device buffers without
+ * writing a filemark if write_filemark=0. *
*/
-static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark)
+static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
+ idetape_pc_t *pc, int write_filemark)
{
idetape_init_pc(pc);
pc->c[0] = WRITE_FILEMARKS;
@@ -2024,26 +1984,25 @@ static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc)
}

/*
- * idetape_queue_pc_tail is based on the following functions:
+ * The function below is based on the following functions:
*
- * ide_do_drive_cmd from ide.c
- * cdrom_queue_request and cdrom_queue_packet_command from ide-cd.c
+ * ide_do_drive_cmd() from ide.c
+ * cdrom_queue_request() and cdrom_queue_packet_command() from ide-cd.c
*
- * We add a special packet command request to the tail of the request
- * queue, and wait for it to be serviced.
+ * We add a special packet command request to the tail of the request queue, and
+ * wait for it to be serviced.
*
- * This is not to be called from within the request handling part
- * of the driver ! We allocate here data in the stack, and it is valid
- * until the request is finished. This is not the case for the bottom
- * part of the driver, where we are always leaving the functions to wait
- * for an interrupt or a timer event.
+ * This is not to be called from within the request handling part of the driver!
+ * We allocate here data on the stack, and it is valid until the request is
+ * finished. This is not the case for the bottom part of the driver, where we
+ * are always leaving the functions to wait for an interrupt or a timer event.
*
- * From the bottom part of the driver, we should allocate safe memory
- * using ide_tape_alloc_pc and ide_tape_alloc_rq, and add
- * the request to the request list without waiting for it to be serviced !
- * In that case, we usually use idetape_queue_pc_head.
+ * From the bottom part of the driver, we should allocate safe memory using
+ * ide_tape_alloc_pc() and ide_tape_alloc_rq() and add the request to the
+ * request list without waiting for it to be serviced! In that case, we usually
+ * use idetape_queue_pc_head().
*/
-static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc)
+static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
{
struct ide_tape_obj *tape = drive->driver_data;
struct request rq;
@@ -2054,7 +2013,8 @@ static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc)
return ide_do_drive_cmd(drive, &rq, ide_wait);
}

-static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd)
+static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+ int cmd)
{
idetape_init_pc(pc);
pc->c[0] = START_STOP;
@@ -2063,15 +2023,13 @@ static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc
pc->callback = &idetape_pc_callback;
}

-static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
+/* Wait for the tape to become ready */
+static int idetape_wait_ready(ide_drive_t *drive, ulong timeout)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
int load_attempted = 0;

- /*
- * Wait for the tape to become ready
- */
tape->flags |= IDETAPE_FL_MEDIUM_PRESENT;
timeout += jiffies;
while (time_before(jiffies, timeout)) {
@@ -2079,10 +2037,12 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
if (!__idetape_queue_pc_tail(drive, &pc))
return 0;
if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
- || (tape->asc == 0x3A)) { /* no media */
+ || (tape->asc == 0x3A)) {
+ /* no media */
if (load_attempted)
return -ENOMEDIUM;
- idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
+ idetape_create_load_unload_cmd(drive, &pc,
+ IDETAPE_LU_LOAD_MASK);
__idetape_queue_pc_tail(drive, &pc);
load_attempted = 1;
/* not about to be ready */
@@ -2094,24 +2054,25 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
return -EIO;
}

-static int idetape_queue_pc_tail (ide_drive_t *drive,idetape_pc_t *pc)
+static int idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
{
return __idetape_queue_pc_tail(drive, pc);
}

-static int idetape_flush_tape_buffers (ide_drive_t *drive)
+static int idetape_flush_tape_buffers(ide_drive_t *drive)
{
idetape_pc_t pc;
int rc;

idetape_create_write_filemark_cmd(drive, &pc, 0);
- if ((rc = idetape_queue_pc_tail(drive, &pc)))
+ rc = idetape_queue_pc_tail(drive, &pc);
+ if (rc)
return rc;
idetape_wait_ready(drive, 60 * 5 * HZ);
return 0;
}

-static void idetape_create_read_position_cmd (idetape_pc_t *pc)
+static void idetape_create_read_position_cmd(idetape_pc_t *pc)
{
idetape_init_pc(pc);
pc->c[0] = READ_POSITION;
@@ -2119,7 +2080,7 @@ static void idetape_create_read_position_cmd (idetape_pc_t *pc)
pc->callback = &idetape_read_position_callback;
}

-static int idetape_read_position (ide_drive_t *drive)
+static int idetape_read_position(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
@@ -2134,18 +2095,20 @@ static int idetape_read_position (ide_drive_t *drive)
return position;
}

-static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip)
+static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+ uint block, u8 partition, int skip)
{
idetape_init_pc(pc);
pc->c[0] = POSITION_TO_ELEMENT;
pc->c[1] = 2;
- put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
+ put_unaligned(cpu_to_be32(block), (uint *) &pc->c[3]);
pc->c[8] = partition;
pc->flags |= PC_FL_WAIT_FOR_DSC;
pc->callback = &idetape_pc_callback;
}

-static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int prevent)
+static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+ int prevent)
{
idetape_tape_t *tape = drive->driver_data;

@@ -2160,7 +2123,7 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int
return 1;
}

-static int __idetape_discard_read_pipeline (ide_drive_t *drive)
+static int __idetape_discard_read_pipeline(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
@@ -2173,10 +2136,11 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
cnt = tape->merge_stage_sz / tape->blk_sz;
if (tape->flags & IDETAPE_FL_FILEMARK) {
tape->flags &= ~IDETAPE_FL_FILEMARK;
- ++cnt; /* Filemarks count as 1 sector */
+ /* Filemarks count as 1 sector */
+ ++cnt;
}
tape->merge_stage_sz = 0;
- if (tape->merge_stage != NULL) {
+ if (tape->merge_stage) {
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
}
@@ -2195,10 +2159,10 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
idetape_wait_for_request(drive, tape->act_data_rq);
spin_unlock_irqrestore(&tape->que_lock, flags);

- while (tape->first_stage != NULL) {
+ while (tape->first_stage) {
struct request *rq_ptr = &tape->first_stage->rq;

- cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors;
+ cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors;
if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
++cnt;
idetape_remove_stage_head(drive);
@@ -2209,15 +2173,14 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
}

/*
- * idetape_position_tape positions the tape to the requested block
- * using the LOCATE packet command. A READ POSITION command is then
- * issued to check where we are positioned.
+ * position the tape to the requested block using the LOCATE packet command. A
+ * READ POSITION command is then issued to check where we are positioned.
*
- * Like all higher level operations, we queue the commands at the tail
- * of the request queue and wait for their completion.
- *
+ * Like all higher level operations, we queue the commands at the tail of the
+ * request queue and wait for their completion.
*/
-static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 partition, int skip)
+static int idetape_position_tape(ide_drive_t *drive, uint block, u8 partition,
+ int skip)
{
idetape_tape_t *tape = drive->driver_data;
int retval;
@@ -2235,28 +2198,30 @@ static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 par
return (idetape_queue_pc_tail(drive, &pc));
}

-static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_position)
+static void idetape_discard_read_pipeline(ide_drive_t *drive, int restore_pos)
{
idetape_tape_t *tape = drive->driver_data;
int cnt;
int seek, position;

cnt = __idetape_discard_read_pipeline(drive);
- if (restore_position) {
+ if (restore_pos) {
position = idetape_read_position(drive);
seek = position > cnt ? position - cnt : 0;
if (idetape_position_tape(drive, seek, 0, 0)) {
- printk(KERN_INFO "ide-tape: %s: position_tape failed in discard_pipeline()\n", tape->name);
+ printk(KERN_INFO "ide-tape: %s: position_tape failed in"
+ " %s\n", tape->name, __func__);
return;
}
}
}

/*
- * idetape_queue_rw_tail generates a read/write request for the block
- * device interface and wait for it to be serviced.
+ * generate a read/write request for the block device interface and wait for it
+ * to be serviced.
*/
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
+ struct idetape_bh *bh)
{
idetape_tape_t *tape = drive->driver_data;
struct request rq;
@@ -2273,7 +2238,8 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
rq.rq_disk = tape->disk;
rq.special = (void *)bh;
rq.sector = tape->first_frm_pos;
- rq.nr_sectors = rq.current_nr_sectors = blocks;
+ rq.nr_sectors = blocks;
+ rq.current_nr_sectors = blocks;
(void) ide_do_drive_cmd(drive, &rq, ide_wait);

if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
@@ -2286,10 +2252,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
return (tape->blk_sz * (blocks-rq.current_nr_sectors));
}

-/*
- * idetape_ins_ppl_into_queue is used to start servicing the
- * pipeline stages, starting from tape->next_stage.
- */
+/* start servicing the pipeline stages, starting from tape->next_stage. */
static void idetape_ins_ppl_into_queue(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
@@ -2303,15 +2266,16 @@ static void idetape_ins_ppl_into_queue(ide_drive_t *drive)
}
}

-static void idetape_create_inquiry_cmd (idetape_pc_t *pc)
+static void idetape_create_inquiry_cmd(idetape_pc_t *pc)
{
idetape_init_pc(pc);
pc->c[0] = INQUIRY;
- pc->c[4] = pc->rq_xfer = 254;
+ pc->c[4] = 254;
+ pc->rq_xfer = 254;
pc->callback = &idetape_pc_callback;
}

-static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
+static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc)
{
idetape_init_pc(pc);
pc->c[0] = REZERO_UNIT;
@@ -2319,7 +2283,7 @@ static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
pc->callback = &idetape_pc_callback;
}

-static void idetape_create_erase_cmd (idetape_pc_t *pc)
+static void idetape_create_erase_cmd(idetape_pc_t *pc)
{
idetape_init_pc(pc);
pc->c[0] = ERASE;
@@ -2328,17 +2292,17 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc)
pc->callback = &idetape_pc_callback;
}

-static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd)
+static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd)
{
idetape_init_pc(pc);
pc->c[0] = SPACE;
- put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
+ put_unaligned(cpu_to_be32(count), (uint *) &pc->c[1]);
pc->c[1] = cmd;
pc->flags |= PC_FL_WAIT_FOR_DSC;
pc->callback = &idetape_pc_callback;
}

-static void idetape_wait_first_stage (ide_drive_t *drive)
+static void idetape_wait_first_stage(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
@@ -2352,17 +2316,16 @@ static void idetape_wait_first_stage (ide_drive_t *drive)
}

/*
- * idetape_add_chrdev_write_request tries to add a character device
- * originated write request to our pipeline. In case we don't succeed,
- * we revert to non-pipelined operation mode for this request.
+ * Try to add a character device originated write request to our pipeline. This
+ * is done in three steps:
*
- * 1. Try to allocate a new pipeline stage.
- * 2. If we can't, wait for more and more requests to be serviced
- * and try again each time.
- * 3. If we still can't allocate a stage, fallback to
- * non-pipelined operation mode for this request.
+ * 1. Try to allocate a new pipeline stage.
+ * 2. If we can't, wait for more and more requests to be serviced and try again
+ * each time.
+ * 3. If we still can't allocate a stage, fallback to non-pipelined operation
+ * mode for this request.
*/
-static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
+static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
{
idetape_tape_t *tape = drive->driver_data;
idetape_stage_t *new_stage;
@@ -2371,9 +2334,9 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)

debug_log(DBG_CHRDEV, "Enter %s\n", __func__);

- /*
- * Attempt to allocate a new stage.
- * Pay special attention to possible race conditions.
+ /*
+ * Attempt to allocate a new stage. Pay special attention to possible
+ * race conditions.
*/
while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) {
spin_lock_irqsave(&tape->que_lock, flags);
@@ -2386,17 +2349,19 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
if (idetape_pipeline_active(tape))
continue;
/*
- * Linux is short on memory. Fallback to
- * non-pipelined operation mode for this request.
+ * Machine is short on memory. Fallback to non-pipelined
+ * operation mode for this request.
*/
- return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
+ return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+ blocks, tape->merge_stage->bh);
}
}
rq = &new_stage->rq;
idetape_init_rq(rq, REQ_IDETAPE_WRITE);
/* Doesn't actually matter - We always assume sequential access */
rq->sector = tape->first_frm_pos;
- rq->nr_sectors = rq->current_nr_sectors = blocks;
+ rq->nr_sectors = blocks;
+ rq->current_nr_sectors = blocks;

idetape_switch_buffers(tape, new_stage);
idetape_add_stage_tail(drive, new_stage);
@@ -2404,11 +2369,11 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
idetape_calculate_speeds(drive);

/*
- * Estimate whether the tape has stopped writing by checking
- * if our write pipeline is currently empty. If we are not
- * writing anymore, wait for the pipeline to be full enough
- * (90%) before starting to service requests, so that we will
- * be able to keep up with the higher speeds of the tape.
+ * Estimate whether the tape has stopped writing by checking if our
+ * write pipeline is currently empty. If we are not writing anymore,
+ * wait for the pipeline to be almost full (90%) before starting to
+ * service requests, so that we will be able to keep up with the higher
+ * speeds of the tape.
*/
if (!idetape_pipeline_active(tape)) {
if (tape->nr_stages >= tape->max_stages * 9 / 10 ||
@@ -2430,10 +2395,10 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
}

/*
- * idetape_wait_for_pipeline will wait until all pending pipeline
- * requests are serviced. Typically called on device close.
+ * wait until all pending pipeline requests are serviced. Typically called on
+ * device close.
*/
-static void idetape_wait_for_pipeline (ide_drive_t *drive)
+static void idetape_wait_for_pipeline(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
@@ -2447,19 +2412,20 @@ static void idetape_wait_for_pipeline (ide_drive_t *drive)
}
}

-static void idetape_empty_write_pipeline (ide_drive_t *drive)
+static void idetape_empty_write_pipeline(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
int blocks, min;
struct idetape_bh *bh;

if (tape->chrdev_dir != idetape_dir_write) {
- printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n");
+ printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline,"
+ " but we are not writing.\n");
return;
}
- if (tape->merge_stage_sz > tape->stage_size) {
+ if (tape->merge_stage_sz > tape->stage_sz) {
printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n");
- tape->merge_stage_sz = tape->stage_size;
+ tape->merge_stage_sz = tape->stage_sz;
}
if (tape->merge_stage_sz) {
blocks = tape->merge_stage_sz / tape->blk_sz;
@@ -2476,12 +2442,14 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
bh = tape->bh;
while (i) {
if (bh == NULL) {
-
- printk(KERN_INFO "ide-tape: bug, bh NULL\n");
+ printk(KERN_INFO "ide-tape: bug,"
+ " bh NULL\n");
break;
}
- min = min(i, (unsigned int)(bh->b_size - atomic_read(&bh->b_count)));
- memset(bh->b_data + atomic_read(&bh->b_count), 0, min);
+ min = min(i, (uint)(bh->b_size -
+ atomic_read(&bh->b_count)));
+ memset(bh->b_data + atomic_read(&bh->b_count),
+ 0, min);
atomic_add(min, &bh->b_count);
i -= min;
bh = bh->b_reqnext;
@@ -2491,7 +2459,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
tape->merge_stage_sz = 0;
}
idetape_wait_for_pipeline(drive);
- if (tape->merge_stage != NULL) {
+ if (tape->merge_stage) {
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
}
@@ -2499,17 +2467,15 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
tape->chrdev_dir = idetape_dir_none;

/*
- * On the next backup, perform the feedback loop again.
- * (I don't want to keep sense information between backups,
- * as some systems are constantly on, and the system load
- * can be totally different on the next backup).
+ * on the next backup, perform the feedback loop again. (I don't want to
+ * keep sense information between backups, as some systems are
+ * constantly on, and the system load can be totally different on the
+ * next backup).
*/
tape->max_stages = tape->min_pipeline;
- if (tape->first_stage != NULL ||
- tape->next_stage != NULL ||
- tape->last_stage != NULL ||
- tape->nr_stages != 0) {
- printk(KERN_ERR "ide-tape: ide-tape pipeline bug, "
+ if (tape->first_stage || tape->next_stage || tape->last_stage ||
+ tape->nr_stages) {
+ printk(KERN_ERR "ide-tape: ide-tape pipeline bug,"
"first_stage %p, next_stage %p, "
"last_stage %p, nr_stages %d\n",
tape->first_stage, tape->next_stage,
@@ -2517,15 +2483,17 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
}
}

-static void idetape_restart_speed_control (ide_drive_t *drive)
+static void idetape_restart_speed_control(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;

tape->rs_speed_ctl_rq = 0;
tape->pipeline_head = 0;
tape->ctl_last_pipe_h = 0;
- tape->ctl_prev_pipe_h = tape->unctl_prev_pipe_h = 0;
- tape->pipe_hspeed = tape->pipe_ctl_hspeed = 5000;
+ tape->ctl_prev_pipe_h = 0;
+ tape->unctl_prev_pipe_h = 0;
+ tape->pipe_hspeed = 5000;
+ tape->pipe_ctl_hspeed = 5000;
tape->unctl_pipe_hspeed = 0;
tape->ctl_pipe_htime = tape->unctl_pipe_htime = jiffies;
tape->ctl_prev_htime = tape->unctl_prev_htime = jiffies;
@@ -2546,22 +2514,25 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
idetape_flush_tape_buffers(drive);
}
if (tape->merge_stage || tape->merge_stage_sz) {
- printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n");
+ printk(KERN_ERR "ide-tape: merge_stage_sz should be"
+ " 0 now\n");
tape->merge_stage_sz = 0;
}
- if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
+ tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0);
+ if (!tape->merge_stage)
return -ENOMEM;
tape->chrdev_dir = idetape_dir_read;

/*
- * Issue a read 0 command to ensure that DSC handshake
- * is switched from completion mode to buffer available
- * mode.
- * No point in issuing this if DSC overlap isn't supported,
- * some drives (Seagate STT3401A) will return an error.
+ * Issue a read 0 command to ensure that DSC handshake is
+ * switched from completion mode to buffer available mode.
+ *
+ * No point in issuing this if DSC overlap isn't supported, some
+ * drives (Seagate STT3401A) will return an error.
*/
if (drive->dsc_overlap) {
- bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_stage->bh);
+ bytes_read = idetape_queue_rw_tail(drive,
+ REQ_IDETAPE_READ, 0, tape->merge_stage->bh);
if (bytes_read < 0) {
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
@@ -2574,11 +2545,13 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
idetape_restart_speed_control(drive);
idetape_init_rq(&rq, REQ_IDETAPE_READ);
rq.sector = tape->first_frm_pos;
- rq.nr_sectors = rq.current_nr_sectors = blocks;
+ rq.nr_sectors = blocks;
+ rq.current_nr_sectors = blocks;
if (!(tape->flags & IDETAPE_FL_PIPELINE_ERR) &&
tape->nr_stages < max_stages) {
new_stage = idetape_kmalloc_stage(tape);
- while (new_stage != NULL) {
+
+ while (new_stage) {
new_stage->rq = rq;
idetape_add_stage_tail(drive, new_stage);
if (tape->nr_stages >= max_stages)
@@ -2599,11 +2572,10 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
}

/*
- * idetape_add_chrdev_read_request is called from idetape_chrdev_read
- * to service a character device read request and add read-ahead
- * requests to our pipeline.
+ * called from idetape_chrdev_read() to service a chrdev read request and add
+ * read-ahead requests to our pipeline.
*/
-static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
+static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
@@ -2612,27 +2584,24 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)

debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);

- /*
- * If we are at a filemark, return a read length of 0
- */
+ /* If we are at a filemark, return a read length of 0 */
if (tape->flags & IDETAPE_FL_FILEMARK)
return 0;

- /*
- * Wait for the next block to be available at the head
- * of the pipeline
- */
+ /* Wait for the next block to be available at the head of the pipeline*/
idetape_init_read(drive, tape->max_stages);
if (tape->first_stage == NULL) {
if (tape->flags & IDETAPE_FL_PIPELINE_ERR)
return 0;
- return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, tape->merge_stage->bh);
+ return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
+ tape->merge_stage->bh);
}
idetape_wait_first_stage(drive);
rq_ptr = &tape->first_stage->rq;
bytes_read = tape->blk_sz *
(rq_ptr->nr_sectors - rq_ptr->current_nr_sectors);
- rq_ptr->nr_sectors = rq_ptr->current_nr_sectors = 0;
+ rq_ptr->nr_sectors = 0;
+ rq_ptr->current_nr_sectors = 0;


if (rq_ptr->errors == IDETAPE_ERROR_EOD)
@@ -2648,36 +2617,38 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
idetape_calculate_speeds(drive);
}
if (bytes_read > blocks * tape->blk_sz) {
- printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
+ printk(KERN_ERR "ide-tape: bug: trying to return more bytes"
+ " than requested\n");
bytes_read = blocks * tape->blk_sz;
}
return (bytes_read);
}

-static void idetape_pad_zeros (ide_drive_t *drive, int bcount)
+static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
{
idetape_tape_t *tape = drive->driver_data;
struct idetape_bh *bh;
int blocks;
-
+
while (bcount) {
unsigned int count;

bh = tape->merge_stage->bh;
- count = min(tape->stage_size, bcount);
+ count = min(tape->stage_sz, bcount);
bcount -= count;
blocks = count / tape->blk_sz;
while (count) {
- atomic_set(&bh->b_count, min(count, (unsigned int)bh->b_size));
+ atomic_set(&bh->b_count, min(count, (uint)bh->b_size));
memset(bh->b_data, 0, atomic_read(&bh->b_count));
count -= atomic_read(&bh->b_count);
bh = bh->b_reqnext;
}
- idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
+ idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
+ tape->merge_stage->bh);
}
}

-static int idetape_pipeline_size (ide_drive_t *drive)
+static int idetape_pipeline_size(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_stage_t *stage;
@@ -2686,7 +2657,7 @@ static int idetape_pipeline_size (ide_drive_t *drive)

idetape_wait_for_pipeline(drive);
stage = tape->first_stage;
- while (stage != NULL) {
+ while (stage) {
rq = &stage->rq;
size += tape->blk_sz * (rq->nr_sectors-rq->current_nr_sectors);
if (rq->errors == IDETAPE_ERROR_FILEMARK)
@@ -2698,11 +2669,10 @@ static int idetape_pipeline_size (ide_drive_t *drive)
}

/*
- * Rewinds the tape to the Beginning Of the current Partition (BOP).
- *
- * We currently support only one partition.
- */
-static int idetape_rewind_tape (ide_drive_t *drive)
+ * rewind the tape to the Beginning Of the current Partition (BOP). We currently
+ * support only one partition.
+ */
+static int idetape_rewind_tape(ide_drive_t *drive)
{
int retval;
idetape_pc_t pc;
@@ -2724,13 +2694,12 @@ static int idetape_rewind_tape (ide_drive_t *drive)
}

/*
- * Our special ide-tape ioctl's.
+ * Our special ide-tape ioctl's.
*
- * Currently there aren't any ioctl's.
- * mtio.h compatible commands should be issued to the character device
- * interface.
+ * Currently there aren't any ioctl's, for mtio.h compatible commands should be
+ * issued to the character device interface.
*/
-static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg)
+static int idetape_blkdev_ioctl(ide_drive_t *drive, uint cmd, ulong arg)
{
idetape_tape_t *tape = drive->driver_data;

@@ -2745,41 +2714,42 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l
debug_log(DBG_PROCS, "Enter %s\n", __func__);

switch (cmd) {
- case 0x0340:
- if (copy_from_user(&config, argp,
- sizeof(struct idetape_config)))
- return -EFAULT;
- tape->best_dsc_rw_freq = config.dsc_rw_frequency;
- tape->max_stages = config.nr_stages;
- break;
- case 0x0350:
- config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
- config.nr_stages = tape->max_stages;
- if (copy_to_user(argp, &config,
- sizeof(struct idetape_config)))
- return -EFAULT;
- break;
- default:
- return -EIO;
+ case 0x0340:
+ if (copy_from_user(&config, argp,
+ sizeof(struct idetape_config)))
+ return -EFAULT;
+ tape->best_dsc_rw_freq = config.dsc_rw_frequency;
+ tape->max_stages = config.nr_stages;
+ break;
+ case 0x0350:
+ config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
+ config.nr_stages = tape->max_stages;
+ if (copy_to_user(argp, &config,
+ sizeof(struct idetape_config)))
+ return -EFAULT;
+ break;
+ default:
+ return -EIO;
}
return 0;
}

/*
- * idetape_space_over_filemarks is now a bit more complicated than just
- * passing the command to the tape since we may have crossed some
- * filemarks during our pipelined read-ahead mode.
+ * The function below is now a bit more complicated than just passing the
+ * command to the tape since we may have crossed some filemarks during our
+ * pipelined read-ahead mode.
*
- * As a minor side effect, the pipeline enables us to support MTFSFM when
- * the filemark is in our internal pipeline even if the tape doesn't
- * support spacing over filemarks in the reverse direction.
+ * As a minor side effect, the pipeline enables us to support MTFSFM when the
+ * filemark is in our internal pipeline even if the tape doesn't support spacing
+ * over filemarks in the reverse direction.
*/
-static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_count)
+static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
+ int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
unsigned long flags;
- int retval,count=0;
+ int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);

if (mt_count == 0)
@@ -2787,14 +2757,11 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
if (MTBSF == mt_op || MTBSFM == mt_op) {
if (!sprev)
return -EIO;
- mt_count = - mt_count;
+ mt_count = -mt_count;
}

if (tape->chrdev_dir == idetape_dir_read) {
- /*
- * We have a read-ahead buffer. Scan it for crossed
- * filemarks.
- */
+ /* Scan the read-ahead buffer for crossed filemarks. */
tape->merge_stage_sz = 0;
if (tape->flags & IDETAPE_FL_FILEMARK) {
tape->flags &= ~IDETAPE_FL_FILEMARK;
@@ -2809,13 +2776,10 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
spin_lock_irqsave(&tape->que_lock, flags);
if (tape->first_stage == tape->active_stage) {
/*
- * We have reached the active stage in the read pipeline.
- * There is no point in allowing the drive to continue
- * reading any farther, so we stop the pipeline.
- *
- * This section should be moved to a separate subroutine,
- * because a similar function is performed in
- * __idetape_discard_read_pipeline(), for example.
+ * We have reached the active stage in the read
+ * pipeline. There is no point in allowing the
+ * drive to continue reading any farther, so we
+ * stop the pipeline.
*/
tape->next_stage = NULL;
spin_unlock_irqrestore(&tape->que_lock, flags);
@@ -2823,7 +2787,8 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
tape->next_stage = tape->first_stage->next;
} else
spin_unlock_irqrestore(&tape->que_lock, flags);
- if (tape->first_stage->rq.errors == IDETAPE_ERROR_FILEMARK)
+ if (tape->first_stage->rq.errors ==
+ IDETAPE_ERROR_FILEMARK)
++count;
idetape_remove_stage_head(drive);
}
@@ -2831,52 +2796,53 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
}

/*
- * The filemark was not found in our internal pipeline.
- * Now we can issue the space command.
+ * The filemark was not found in our internal pipeline; now we can issue
+ * the space command.
*/
switch (mt_op) {
- case MTFSF:
- case MTBSF:
- idetape_create_space_cmd(&pc,mt_count-count,IDETAPE_SPACE_OVER_FILEMARK);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTFSFM:
- case MTBSFM:
- if (!sprev)
- return (-EIO);
- retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count);
- if (retval) return (retval);
- count = (MTBSFM == mt_op ? 1 : -1);
- return (idetape_space_over_filemarks(drive, MTFSF, count));
- default:
- printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",mt_op);
+ case MTFSF:
+ case MTBSF:
+ idetape_create_space_cmd(&pc, mt_count-count,
+ IDETAPE_SPACE_OVER_FILEMARK);
+ return (idetape_queue_pc_tail(drive, &pc));
+ case MTFSFM:
+ case MTBSFM:
+ if (!sprev)
return (-EIO);
+ retval = idetape_space_over_filemarks(drive, MTFSF,
+ mt_count-count);
+ if (retval)
+ return (retval);
+ count = (MTBSFM == mt_op ? 1 : -1);
+ return (idetape_space_over_filemarks(drive, MTFSF, count));
+ default:
+ printk(KERN_ERR "ide-tape: MTIO operation %d not"
+ " supported\n", mt_op);
+ return (-EIO);
}
}

-
/*
- * Our character device read / write functions.
+ * Our character device read / write functions.
*
- * The tape is optimized to maximize throughput when it is transferring
- * an integral number of the "continuous transfer limit", which is
- * a parameter of the specific tape (26 KB on my particular tape).
- * (32 kB for Onstream)
+ * The tape is optimized to maximize throughput when it is transferring an
+ * integral number of the "continuous transfer limit", which is a parameter of
+ * the specific tape (26 KB on my particular tape/32 kB for Onstream).
*
- * As of version 1.3 of the driver, the character device provides an
- * abstract continuous view of the media - any mix of block sizes (even 1
- * byte) on the same backup/restore procedure is supported. The driver
- * will internally convert the requests to the recommended transfer unit,
- * so that an unmatch between the user's block size to the recommended
- * size will only result in a (slightly) increased driver overhead, but
- * will no longer hit performance.
- * This is not applicable to Onstream.
+ * As of version 1.3 of the driver, the character device provides an abstract
+ * continuous view of the media - any mix of block sizes (even 1 byte) on the
+ * same backup/restore procedure is supported. The driver will internally
+ * convert the requests to the recommended transfer unit, so that an unmatch
+ * between the user's block size to the recommended size will only result in a
+ * (slightly) increased driver overhead, but will no longer hit performance.
+ * This is not applicable to Onstream.
*/
-static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
+static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct ide_tape_obj *tape = ide_tape_f(file);
ide_drive_t *drive = tape->drive;
- ssize_t bytes_read,temp, actually_read = 0, rc;
+ ssize_t bytes_read, temp, actually_read = 0, rc;
ssize_t ret = 0;
u16 ctl = *(u16 *)&tape->caps[12];

@@ -2895,17 +2861,19 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
return (0);
if (tape->merge_stage_sz) {
actually_read = min((uint)(tape->merge_stage_sz), (uint)count);
- if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, actually_read))
+ if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+ actually_read))
ret = -EFAULT;
buf += actually_read;
tape->merge_stage_sz -= actually_read;
count -= actually_read;
}
- while (count >= tape->stage_size) {
+ while (count >= tape->stage_sz) {
bytes_read = idetape_add_chrdev_read_request(drive, ctl);
if (bytes_read <= 0)
goto finish;
- if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read))
+ if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+ bytes_read))
ret = -EFAULT;
buf += bytes_read;
count -= bytes_read;
@@ -2915,8 +2883,9 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
bytes_read = idetape_add_chrdev_read_request(drive, ctl);
if (bytes_read <= 0)
goto finish;
- temp = min((unsigned long)count, (unsigned long)bytes_read);
- if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, temp))
+ temp = min((ulong)count, (ulong)bytes_read);
+ if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+ temp))
ret = -EFAULT;
actually_read += temp;
tape->merge_stage_sz = bytes_read-temp;
@@ -2932,7 +2901,7 @@ finish:
return (ret) ? ret : actually_read;
}

-static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
+static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct ide_tape_obj *tape = ide_tape_f(file);
@@ -2956,20 +2925,22 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
"should be 0 now\n");
tape->merge_stage_sz = 0;
}
- if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
+ tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0);
+ if (!tape->merge_stage)
return -ENOMEM;
+
tape->chrdev_dir = idetape_dir_write;
idetape_init_merge_stage(tape);

/*
- * Issue a write 0 command to ensure that DSC handshake
- * is switched from completion mode to buffer available
- * mode.
- * No point in issuing this if DSC overlap isn't supported,
- * some drives (Seagate STT3401A) will return an error.
+ * Issue a write 0 command to ensure that DSC handshake is
+ * switched from completion mode to buffer available mode. No
+ * point in issuing this if DSC overlap isn't supported, some
+ * drives (Seagate STT3401A) will return an error.
*/
if (drive->dsc_overlap) {
- ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh);
+ ssize_t retval = idetape_queue_rw_tail(drive,
+ REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh);
if (retval < 0) {
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
@@ -2983,19 +2954,20 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
if (tape->rs_speed_ctl_rq)
idetape_restart_speed_control(drive);
if (tape->merge_stage_sz) {
- if (tape->merge_stage_sz >= tape->stage_size) {
- printk(KERN_ERR "ide-tape: bug: merge buffer too big\n");
+ if (tape->merge_stage_sz >= tape->stage_sz) {
+ printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
tape->merge_stage_sz = 0;
}
- actually_written = min((uint)(tape->stage_size -
+ actually_written = min((uint)(tape->stage_sz -
tape->merge_stage_sz), (uint)count);
- if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written))
+ if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+ actually_written))
ret = -EFAULT;
buf += actually_written;
tape->merge_stage_sz += actually_written;
count -= actually_written;

- if (tape->merge_stage_sz == tape->stage_size) {
+ if (tape->merge_stage_sz == tape->stage_sz) {
ssize_t retval;
tape->merge_stage_sz = 0;
retval = idetape_add_chrdev_write_request(drive, ctl);
@@ -3003,27 +2975,29 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
return (retval);
}
}
- while (count >= tape->stage_size) {
+ while (count >= tape->stage_sz) {
ssize_t retval;
- if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, tape->stage_size))
+ if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+ tape->stage_sz))
ret = -EFAULT;
- buf += tape->stage_size;
- count -= tape->stage_size;
+ buf += tape->stage_sz;
+ count -= tape->stage_sz;
retval = idetape_add_chrdev_write_request(drive, ctl);
- actually_written += tape->stage_size;
+ actually_written += tape->stage_sz;
if (retval <= 0)
return (retval);
}
if (count) {
actually_written += count;
- if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, count))
+ if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+ count))
ret = -EFAULT;
tape->merge_stage_sz += count;
}
return (ret) ? ret : actually_written;
}

-static int idetape_write_filemark (ide_drive_t *drive)
+static int idetape_write_filemark(ide_drive_t *drive)
{
idetape_pc_t pc;

@@ -3054,111 +3028,116 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
- int i,retval;
+ int i, retval;

debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
mt_op, mt_count);
- /*
- * Commands which need our pipelined read-ahead stages.
- */
+
+ /* Commands which need our pipelined read-ahead stages. */
switch (mt_op) {
- case MTFSF:
- case MTFSFM:
- case MTBSF:
- case MTBSFM:
- if (!mt_count)
- return (0);
- return (idetape_space_over_filemarks(drive,mt_op,mt_count));
- default:
- break;
+ case MTFSF:
+ case MTFSFM:
+ case MTBSF:
+ case MTBSFM:
+ if (!mt_count)
+ return (0);
+ return (idetape_space_over_filemarks(drive, mt_op, mt_count));
+ default:
+ break;
}
switch (mt_op) {
- case MTWEOF:
- if (tape->write_prot)
- return -EACCES;
- idetape_discard_read_pipeline(drive, 1);
- for (i = 0; i < mt_count; i++) {
- retval = idetape_write_filemark(drive);
- if (retval)
- return retval;
- }
- return (0);
- case MTREW:
- idetape_discard_read_pipeline(drive, 0);
- if (idetape_rewind_tape(drive))
+ case MTWEOF:
+ if (tape->write_prot)
+ return -EACCES;
+ idetape_discard_read_pipeline(drive, 1);
+ for (i = 0; i < mt_count; i++) {
+ retval = idetape_write_filemark(drive);
+ if (retval)
+ return retval;
+ }
+ return (0);
+ case MTREW:
+ idetape_discard_read_pipeline(drive, 0);
+ if (idetape_rewind_tape(drive))
+ return -EIO;
+ return 0;
+ case MTLOAD:
+ idetape_discard_read_pipeline(drive, 0);
+ idetape_create_load_unload_cmd(drive, &pc,
+ IDETAPE_LU_LOAD_MASK);
+ return (idetape_queue_pc_tail(drive, &pc));
+ case MTUNLOAD:
+ case MTOFFL:
+ /*
+ * If door is locked, attempt to unlock before
+ * attempting to eject.
+ */
+ if (tape->door_locked) {
+ if (idetape_create_prevent_cmd(drive, &pc, 0))
+ if (!idetape_queue_pc_tail(drive, &pc))
+ tape->door_locked = DOOR_UNLOCKED;
+ }
+ idetape_discard_read_pipeline(drive, 0);
+ idetape_create_load_unload_cmd(drive, &pc,
+ !IDETAPE_LU_LOAD_MASK);
+ retval = idetape_queue_pc_tail(drive, &pc);
+ if (!retval)
+ tape->flags &= ~IDETAPE_FL_MEDIUM_PRESENT;
+ return retval;
+ case MTNOP:
+ idetape_discard_read_pipeline(drive, 0);
+ return (idetape_flush_tape_buffers(drive));
+ case MTRETEN:
+ idetape_discard_read_pipeline(drive, 0);
+ idetape_create_load_unload_cmd(drive, &pc,
+ IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
+ return (idetape_queue_pc_tail(drive, &pc));
+ case MTEOM:
+ idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
+ return (idetape_queue_pc_tail(drive, &pc));
+ case MTERASE:
+ (void) idetape_rewind_tape(drive);
+ idetape_create_erase_cmd(&pc);
+ return (idetape_queue_pc_tail(drive, &pc));
+ case MTSETBLK:
+ if (mt_count) {
+ if (mt_count < tape->blk_sz ||
+ mt_count % tape->blk_sz)
return -EIO;
+ tape->user_bs_factor = mt_count / tape->blk_sz;
+ tape->flags &= ~IDETAPE_FL_DETECT_BS;
+ } else
+ tape->flags |= IDETAPE_FL_DETECT_BS;
+ return 0;
+ case MTSEEK:
+ idetape_discard_read_pipeline(drive, 0);
+ return idetape_position_tape(drive,
+ mt_count * tape->user_bs_factor, tape->partition, 0);
+ case MTSETPART:
+ idetape_discard_read_pipeline(drive, 0);
+ return (idetape_position_tape(drive, 0, mt_count, 0));
+ case MTFSR:
+ case MTBSR:
+ case MTLOCK:
+ if (!idetape_create_prevent_cmd(drive, &pc, 1))
return 0;
- case MTLOAD:
- idetape_discard_read_pipeline(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTUNLOAD:
- case MTOFFL:
- /*
- * If door is locked, attempt to unlock before
- * attempting to eject.
- */
- if (tape->door_locked) {
- if (idetape_create_prevent_cmd(drive, &pc, 0))
- if (!idetape_queue_pc_tail(drive, &pc))
- tape->door_locked = DOOR_UNLOCKED;
- }
- idetape_discard_read_pipeline(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,!IDETAPE_LU_LOAD_MASK);
- retval = idetape_queue_pc_tail(drive, &pc);
- if (!retval)
- tape->flags &= ~IDETAPE_FL_MEDIUM_PRESENT;
+ retval = idetape_queue_pc_tail(drive, &pc);
+ if (retval)
return retval;
- case MTNOP:
- idetape_discard_read_pipeline(drive, 0);
- return (idetape_flush_tape_buffers(drive));
- case MTRETEN:
- idetape_discard_read_pipeline(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTEOM:
- idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTERASE:
- (void) idetape_rewind_tape(drive);
- idetape_create_erase_cmd(&pc);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTSETBLK:
- if (mt_count) {
- if (mt_count < tape->blk_sz ||
- mt_count % tape->blk_sz)
- return -EIO;
- tape->user_bs_factor = mt_count / tape->blk_sz;
- tape->flags &= ~IDETAPE_FL_DETECT_BS;
- } else
- tape->flags |= IDETAPE_FL_DETECT_BS;
- return 0;
- case MTSEEK:
- idetape_discard_read_pipeline(drive, 0);
- return idetape_position_tape(drive, mt_count * tape->user_bs_factor, tape->partition, 0);
- case MTSETPART:
- idetape_discard_read_pipeline(drive, 0);
- return (idetape_position_tape(drive, 0, mt_count, 0));
- case MTFSR:
- case MTBSR:
- case MTLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 1))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
- if (retval) return retval;
- tape->door_locked = DOOR_EXPLICITLY_LOCKED;
- return 0;
- case MTUNLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 0))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
- if (retval) return retval;
- tape->door_locked = DOOR_UNLOCKED;
+ tape->door_locked = DOOR_EXPLICITLY_LOCKED;
+ return 0;
+ case MTUNLOCK:
+ if (!idetape_create_prevent_cmd(drive, &pc, 0))
return 0;
- default:
- printk(KERN_ERR "ide-tape: MTIO operation %d not "
- "supported\n", mt_op);
- return (-EIO);
+ retval = idetape_queue_pc_tail(drive, &pc);
+ if (retval)
+ return retval;
+ tape->door_locked = DOOR_UNLOCKED;
+ return 0;
+ default:
+ printk(KERN_ERR "ide-tape: MTIO operation %d not "
+ "supported\n", mt_op);
+ return (-EIO);
}
}

@@ -3188,36 +3167,40 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
if (cmd == MTIOCGET || cmd == MTIOCPOS) {
block_offset = idetape_pipeline_size(drive) /
(tape->blk_sz * tape->user_bs_factor);
- if ((position = idetape_read_position(drive)) < 0)
+ position = idetape_read_position(drive);
+ if (position < 0)
return -EIO;
}
switch (cmd) {
- case MTIOCTOP:
- if (copy_from_user(&mtop, argp, sizeof (struct mtop)))
- return -EFAULT;
- return (idetape_mtioctop(drive,mtop.mt_op,mtop.mt_count));
- case MTIOCGET:
- memset(&mtget, 0, sizeof (struct mtget));
- mtget.mt_type = MT_ISSCSI2;
- mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
- mtget.mt_dsreg = ((tape->blk_sz * tape->user_bs_factor)
- << MT_ST_BLKSIZE_SHIFT)
- & MT_ST_BLKSIZE_MASK;
- if (tape->drv_write_prot) {
- mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
- }
- if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
- return -EFAULT;
- return 0;
- case MTIOCPOS:
- mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
- if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
- return -EFAULT;
- return 0;
- default:
- if (tape->chrdev_dir == idetape_dir_read)
- idetape_discard_read_pipeline(drive, 1);
- return idetape_blkdev_ioctl(drive, cmd, arg);
+ case MTIOCTOP:
+ if (copy_from_user(&mtop, argp, sizeof(struct mtop)))
+ return -EFAULT;
+ return (idetape_mtioctop(drive, mtop.mt_op,
+ mtop.mt_count));
+ case MTIOCGET:
+ memset(&mtget, 0, sizeof(struct mtget));
+ mtget.mt_type = MT_ISSCSI2;
+ mtget.mt_blkno = position /
+ tape->user_bs_factor - block_offset;
+ mtget.mt_dsreg = ((tape->blk_sz * tape->user_bs_factor)
+ << MT_ST_BLKSIZE_SHIFT)
+ & MT_ST_BLKSIZE_MASK;
+ if (tape->drv_write_prot)
+ mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
+
+ if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
+ return -EFAULT;
+ return 0;
+ case MTIOCPOS:
+ mtpos.mt_blkno = position /
+ tape->user_bs_factor - block_offset;
+ if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
+ return -EFAULT;
+ return 0;
+ default:
+ if (tape->chrdev_dir == idetape_dir_read)
+ idetape_discard_read_pipeline(drive, 1);
+ return idetape_blkdev_ioctl(drive, cmd, arg);
}
}

@@ -3241,17 +3224,14 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
}
return;
}
- tape->blk_sz = (pc.buffer[4 + 5] << 16) +
- (pc.buffer[4 + 6] << 8) +
- pc.buffer[4 + 7];
+ tape->blk_sz = (pc.buffer[4 + 5] << 16) +
+ (pc.buffer[4 + 6] << 8) +
+ pc.buffer[4 + 7];

tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
}

-/*
- * Our character device open function.
- */
-static int idetape_chrdev_open (struct inode *inode, struct file *filp)
+static int idetape_chrdev_open(struct inode *inode, struct file *filp)
{
unsigned int minor = iminor(inode), i = minor & ~0xc0;
ide_drive_t *drive;
@@ -3271,7 +3251,8 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
if (i >= MAX_HWIFS * MAX_DRIVES)
return -ENXIO;

- if (!(tape = ide_tape_chrdev_get(i)))
+ tape = ide_tape_chrdev_get(i);
+ if (!tape)
return -ENXIO;

drive = tape->drive;
@@ -3318,9 +3299,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
}
}

- /*
- * Lock the tape drive door so user can't eject.
- */
+ /* Lock the tape drive door so user can't eject. */
if (tape->chrdev_dir == idetape_dir_none) {
if (idetape_create_prevent_cmd(drive, &pc, 1)) {
if (!idetape_queue_pc_tail(drive, &pc)) {
@@ -3338,13 +3317,13 @@ out_put_tape:
return retval;
}

-static void idetape_write_release (ide_drive_t *drive, unsigned int minor)
+static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
{
idetape_tape_t *tape = drive->driver_data;

idetape_empty_write_pipeline(drive);
tape->merge_stage = __idetape_kmalloc_stage(tape, 1, 0);
- if (tape->merge_stage != NULL) {
+ if (tape->merge_stage) {
idetape_pad_zeros(drive, tape->blk_sz *
(tape->user_bs_factor - 1));
__idetape_kfree_stage(tape->merge_stage);
@@ -3355,10 +3334,7 @@ static void idetape_write_release (ide_drive_t *drive, unsigned int minor)
idetape_flush_tape_buffers(drive);
}

-/*
- * Our character device release function.
- */
-static int idetape_chrdev_release (struct inode *inode, struct file *filp)
+static int idetape_chrdev_release(struct inode *inode, struct file *filp)
{
struct ide_tape_obj *tape = ide_tape_f(filp);
ide_drive_t *drive = tape->drive;
@@ -3378,7 +3354,7 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
else
idetape_wait_for_pipeline(drive);
}
- if (tape->cache_stage != NULL) {
+ if (tape->cache_stage) {
__idetape_kfree_stage(tape->cache_stage);
tape->cache_stage = NULL;
}
@@ -3399,15 +3375,13 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
}

/*
- * idetape_identify_device is called to check the contents of the
- * ATAPI IDENTIFY command results. We return:
+ * called to check the contents of the ATAPI IDENTIFY command results.
+ * We return:
*
- * 1 If the tape can be supported by us, based on the information
- * we have so far.
- *
- * 0 If this tape driver is not currently supported by us.
+ * 1. If the tape is supported by us based on the information we have so far.
+ * 0. If this tape driver is not currently supported by us.
*/
-static int idetape_identify_device (ide_drive_t *drive)
+static int idetape_identify_device(ide_drive_t *drive)
{
struct idetape_id_gcw gcw;
struct hd_driveid *id = drive->id;
@@ -3417,18 +3391,20 @@ static int idetape_identify_device (ide_drive_t *drive)

*((unsigned short *) &gcw) = id->config;

- /* Check that we can support this device */
-
- if (gcw.protocol !=2 )
- printk(KERN_ERR "ide-tape: Protocol is not ATAPI\n");
+ if (gcw.protocol != 2)
+ printk(KERN_ERR "ide-tape: Protocol %d is not ATAPI\n",
+ gcw.protocol);
else if (gcw.device_type != 1)
- printk(KERN_ERR "ide-tape: Device type is not set to tape\n");
+ printk(KERN_ERR "ide-tape: Device type %d is not set to tape\n",
+ gcw.device_type);
else if (!gcw.removable)
printk(KERN_ERR "ide-tape: The removable flag is not set\n");
else if (gcw.packet_size != 0) {
- printk(KERN_ERR "ide-tape: Packet size is not 12 bytes long\n");
+ printk(KERN_ERR "ide-tape: Packet size of %d is not 12 bytes"
+ " long\n", gcw.packet_size);
if (gcw.packet_size == 1)
- printk(KERN_ERR "ide-tape: Sorry, padding to 16 bytes is still not supported\n");
+ printk(KERN_ERR "ide-tape: Sorry, padding to 16 bytes"
+ " is still not supported\n");
} else
return 1;
return 0;
@@ -3463,7 +3439,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
* Ask the tape about its various parameters. In particular, we will adjust our
* data transfer buffer size to the recommended value as returned by the tape.
*/
-static void idetape_get_mode_sense_results (ide_drive_t *drive)
+static void idetape_get_mode_sense_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
@@ -3511,51 +3487,61 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive)
}

#ifdef CONFIG_IDE_PROC_FS
-static void idetape_add_settings (ide_drive_t *drive)
+static void idetape_add_settings(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;

-/*
- * drive setting name read/write data type min max mul_factor div_factor data pointer set function
- */
ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
1, 2, (u16 *)&tape->caps[16], NULL);
- ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL);
- ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL);
- ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL);
- ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL);
- ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL);
+ ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff,
+ tape->stage_sz / 1024, 1, &tape->min_pipeline, NULL);
+ ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff,
+ tape->stage_sz / 1024, 1, &tape->max_stages, NULL);
+ ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff,
+ tape->stage_sz / 1024, 1, &tape->max_pipeline, NULL);
+
+ ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0,
+ 0xffff, tape->stage_sz / 1024, 1, &tape->nr_stages,
+ NULL);
+
+ ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0,
+ 0xffff, tape->stage_sz / 1024, 1,
+ &tape->nr_pending_stages, NULL);
+
ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
1, 1, (u16 *)&tape->caps[14], NULL);
- ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL);
+ ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff,
+ 1, 1024, &tape->stage_sz, NULL);
ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
NULL);
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL);
+ ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1,
+ 1, 1, &drive->dsc_overlap, NULL);
ide_add_setting(drive, "pipeline_head_speed_c", SETTING_READ, TYPE_INT,
0, 0xffff, 1, 1, &tape->pipe_ctl_hspeed, NULL);
ide_add_setting(drive, "pipeline_head_speed_u", SETTING_READ, TYPE_INT,
0, 0xffff, 1, 1, &tape->unctl_pipe_hspeed, NULL);
- ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL);
- ide_add_setting(drive, "debug_level", SETTING_RW, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_level, NULL);
+ ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
+ 1, 1, &tape->avg_speed, NULL);
+ ide_add_setting(drive, "debug_level", SETTING_RW, TYPE_INT, 0, 0xffff,
+ 1, 1, &tape->debug_level, NULL);
}
#else
static inline void idetape_add_settings(ide_drive_t *drive) { ; }
#endif

/*
- * ide_setup is called to:
+ * The function below is called to:
*
- * 1. Initialize our various state variables.
- * 2. Ask the tape for its capabilities.
- * 3. Allocate a buffer which will be used for data
- * transfer. The buffer size is chosen based on
- * the recommendation which we received in step (2).
+ * - Initialize our various state variables.
+ * - Ask the tape for its capabilities.
+ * - Allocate a buffer which will be used for data transfer. The buffer size is
+ * chosen based on the recommendation which we received in the previous step.
*
- * Note that at this point ide.c already assigned us an irq, so that
- * we can queue requests here and wait for their completion.
+ * Note that at this point ide.c already assigned us an irq, so that we can
+ * queue requests here and wait for their completion.
*/
-static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
+static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
{
unsigned long t1, tmid, tn, t;
int speed;
@@ -3586,18 +3572,18 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
tape->flags |= IDETAPE_FL_DRQ_INTERRUPT;

tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;
-
+
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
ide_tape_get_bsize_from_bdesc(drive);
tape->user_bs_factor = 1;
- tape->stage_size = *ctl * tape->blk_sz;
- while (tape->stage_size > 0xffff) {
+ tape->stage_sz = *ctl * tape->blk_sz;
+ while (tape->stage_sz > 0xffff) {
printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
*ctl /= 2;
- tape->stage_size = *ctl * tape->blk_sz;
+ tape->stage_sz = *ctl * tape->blk_sz;
}
- stage_size = tape->stage_size;
+ stage_size = tape->stage_sz;
tape->pages_per_stage = stage_size / PAGE_SIZE;
if (stage_size % PAGE_SIZE) {
tape->pages_per_stage++;
@@ -3607,23 +3593,22 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
/* Select the "best" DSC read/write polling freq and pipeline size. */
speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);

- tape->max_stages = speed * 1000 * 10 / tape->stage_size;
+ tape->max_stages = speed * 1000 * 10 / tape->stage_sz;

- /*
- * Limit memory use for pipeline to 10% of physical memory
- */
+ /* Limit memory use for pipeline to 10% of physical memory */
si_meminfo(&si);
- if (tape->max_stages * tape->stage_size > si.totalram * si.mem_unit / 10)
- tape->max_stages = si.totalram * si.mem_unit / (10 * tape->stage_size);
- tape->max_stages = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES);
- tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES);
- tape->max_pipeline = min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES);
+ if (tape->max_stages * tape->stage_sz > si.totalram * si.mem_unit / 10)
+ tape->max_stages = si.totalram * si.mem_unit /
+ (10 * tape->stage_sz);
+ tape->max_stages = min(tape->max_stages, IDETAPE_MAX_PPL_STAGES);
+ tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PPL_STAGES);
+ tape->max_pipeline = min(tape->max_stages * 2, IDETAPE_MAX_PPL_STAGES);
if (tape->max_stages == 0)
tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1;

- t1 = (tape->stage_size * HZ) / (speed * 1000);
+ t1 = (tape->stage_sz * HZ) / (speed * 1000);
tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125);
- tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000);
+ tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_sz * HZ) / (speed * 1000);

if (tape->max_stages)
t = tn;
@@ -3631,8 +3616,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
t = t1;

/*
- * Ensure that the number we got makes sense; limit
- * it within IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
+ * Ensure that the number we got makes sense; limit it within
+ * IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
*/
tape->best_dsc_rw_freq = max_t(ulong,
min_t(ulong, t, IDETAPE_DSC_RW_MAX),
@@ -3640,9 +3625,9 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
"%dkB pipeline, %lums tDSC%s\n",
drive->name, tape->name, *(u16 *)&tape->caps[14],
- (*(u16 *)&tape->caps[16] * 512) / tape->stage_size,
- tape->stage_size / 1024,
- tape->max_stages * tape->stage_size / 1024,
+ (*(u16 *)&tape->caps[16] * 512) / tape->stage_sz,
+ tape->stage_sz / 1024,
+ tape->max_stages * tape->stage_sz / 1024,
tape->best_dsc_rw_freq * 1000 / HZ,
drive->using_dma ? ", DMA":"");

@@ -3712,7 +3697,7 @@ static ide_driver_t idetape_driver = {
.remove = ide_tape_remove,
.version = IDETAPE_VERSION,
.media = ide_tape,
- .supports_dsc_overlap = 1,
+ .supports_dsc_overlap = 1,
.do_request = idetape_do_request,
.end_request = idetape_end_request,
.error = __ide_error,
@@ -3722,9 +3707,7 @@ static ide_driver_t idetape_driver = {
#endif
};

-/*
- * Our character device supporting functions, passed to register_chrdev.
- */
+/* Our character device supporting functions, passed to register_chrdev. */
static const struct file_operations idetape_fops = {
.owner = THIS_MODULE,
.read = idetape_chrdev_read,
@@ -3739,7 +3722,8 @@ static int idetape_open(struct inode *inode, struct file *filp)
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_tape_obj *tape;

- if (!(tape = ide_tape_get(disk)))
+ tape = ide_tape_get(disk);
+ if (!tape)
return -ENXIO;

return 0;
@@ -3786,21 +3770,26 @@ static int ide_tape_probe(ide_drive_t *drive)
goto failed;
if (drive->media != ide_tape)
goto failed;
- if (!idetape_identify_device (drive)) {
- printk(KERN_ERR "ide-tape: %s: not supported by this version of ide-tape\n", drive->name);
+ if (!idetape_identify_device(drive)) {
+ printk(KERN_ERR "ide-tape: %s: not supported by this version of"
+ " the driver\n", drive->name);
goto failed;
}
if (drive->scsi) {
- printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive->name);
+ printk("ide-tape: passing drive %s to ide-scsi emulation.\n",
+ drive->name);
goto failed;
}
if (strstr(drive->id->model, "OnStream DI-")) {
- printk(KERN_WARNING "ide-tape: Use drive %s with ide-scsi emulation and osst.\n", drive->name);
- printk(KERN_WARNING "ide-tape: OnStream support will be removed soon from ide-tape!\n");
- }
- tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL);
- if (tape == NULL) {
- printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name);
+ printk(KERN_WARNING "ide-tape: Use drive %s with ide-scsi"
+ " emulation and osst.\n", drive->name);
+ printk(KERN_WARNING "ide-tape: OnStream support will be removed"
+ " soon from ide-tape!\n");
+ }
+ tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
+ if (!tape) {
+ printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
+ drive->name);
goto failed;
}

@@ -3831,9 +3820,11 @@ static int ide_tape_probe(ide_drive_t *drive)
idetape_setup(drive, tape, minor);

class_device_create(idetape_sysfs_class, NULL,
- MKDEV(IDETAPE_MAJOR, minor), &drive->gendev, "%s", tape->name);
+ MKDEV(IDETAPE_MAJOR, minor), &drive->gendev,
+ "%s", tape->name);
class_device_create(idetape_sysfs_class, NULL,
- MKDEV(IDETAPE_MAJOR, minor + 128), &drive->gendev, "n%s", tape->name);
+ MKDEV(IDETAPE_MAJOR, minor + 128), &drive->gendev,
+ "n%s", tape->name);

g->fops = &idetape_block_ops;
ide_register_region(g);
@@ -3846,10 +3837,7 @@ failed:
return -ENODEV;
}

-MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
-MODULE_LICENSE("GPL");
-
-static void __exit idetape_exit (void)
+static void __exit idetape_exit(void)
{
driver_unregister(&idetape_driver.gen_driver);
class_destroy(idetape_sysfs_class);
@@ -3868,7 +3856,8 @@ static int __init idetape_init(void)
}

if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
- printk(KERN_ERR "ide-tape: Failed to register character device interface\n");
+ printk(KERN_ERR "ide-tape: Failed to register character device"
+ " interface\n");
error = -EBUSY;
goto out_free_class;
}
@@ -3891,3 +3880,5 @@ MODULE_ALIAS("ide:*m-tape*");
module_init(idetape_init);
module_exit(idetape_exit);
MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR);
+MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
+MODULE_LICENSE("GPL");
--
1.5.3.7


\
 
 \ /
  Last update: 2008-01-27 11:03    [W:0.380 / U:5.792 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site