lkml.org 
[lkml]   [2008]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] 2.4: Back-port of pl2303.c from 2.6.23.14
I experienced major major data loss on a PL-2303 USB-serial converter
under 2.4.36, which I remedied by back-porting the pl2303.c from the
latest 2.6 kernel tree.

---

diff -u linux-2.4.36/drivers/usb/serial/pl2303.c.orig linux-2.4.36/drivers/usb/serial/pl2303.c
--- pl2303.c.orig 2008-01-01 22:36:40.000000000 +1030
+++ pl2303.c 2008-01-26 05:32:00.000000000 +1030
@@ -1,17 +1,20 @@
/*
* Prolific PL2303 USB to serial adaptor driver
*
- * Copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2003 IBM Corp.
*
* Original driver for 2.2.x by anonymous
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
+ * 2007_Jan_25 dn
+ * Back-port pl2303.c from linux-2.6.23.14 - corrects major loss of
+ * transmitted data, plus minor loss during close. davidn@davidnewall.com.
+ *
* 2003_Apr_24 gkh
* Added line error reporting support. Hopefully it is correct...
*
@@ -33,6 +36,9 @@
*
*/

+/* TODO first char sent is lost on second open of device. anecdotal evidence
+ * TODO suggests this might be on all even opens of device. dn. */
+
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -59,31 +65,60 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.10.1" /* Takes from 2.6's */
#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"

+#define PL2303_CLOSING_WAIT (30*HZ)

+#define PL2303_BUF_SIZE 1024
+#define PL2303_TMP_BUF_SIZE 1024
+
+struct pl2303_buf {
+ unsigned int buf_size;
+ char *buf_buf;
+ char *buf_get;
+ char *buf_put;
+};

static struct usb_device_id id_table [] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
+ { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
+ { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
+ { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
+ { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
+ { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
+ { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
+ { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
+ { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
+ { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
+ { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
+ { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) },
+ { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ } /* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table);

-
#define SET_LINE_REQUEST_TYPE 0x21
#define SET_LINE_REQUEST 0x20

@@ -164,6 +199,8 @@

struct pl2303_private {
spinlock_t lock;
+ struct pl2303_buf *buf;
+ int write_urb_in_use;
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
@@ -171,6 +208,175 @@
enum pl2303_type type;
};

+/*
+ * pl2303_buf_alloc
+ *
+ * Allocate a circular buffer and all associated memory.
+ */
+static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
+{
+ struct pl2303_buf *pb;
+
+ if (size == 0)
+ return NULL;
+
+ pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
+ if (pb == NULL)
+ return NULL;
+
+ pb->buf_buf = kmalloc(size, GFP_KERNEL);
+ if (pb->buf_buf == NULL) {
+ kfree(pb);
+ return NULL;
+ }
+
+ pb->buf_size = size;
+ pb->buf_get = pb->buf_put = pb->buf_buf;
+
+ return pb;
+}
+
+/*
+ * pl2303_buf_free
+ *
+ * Free the buffer and all associated memory.
+ */
+static void pl2303_buf_free(struct pl2303_buf *pb)
+{
+ if (pb) {
+ kfree(pb->buf_buf);
+ kfree(pb);
+ }
+}
+
+/*
+ * pl2303_buf_clear
+ *
+ * Clear out all data in the circular buffer.
+ */
+static void pl2303_buf_clear(struct pl2303_buf *pb)
+{
+ if (pb != NULL)
+ pb->buf_get = pb->buf_put;
+ /* equivalent to a get of all data available */
+}
+
+/*
+ * pl2303_buf_data_avail
+ *
+ * Return the number of bytes of data available in the circular
+ * buffer.
+ */
+static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
+{
+ if (pb == NULL)
+ return 0;
+
+ return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+}
+
+/*
+ * pl2303_buf_space_avail
+ *
+ * Return the number of bytes of space available in the circular
+ * buffer.
+ */
+static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
+{
+ if (pb == NULL)
+ return 0;
+
+ return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+}
+
+static int copy_in(char *dest, int from_user, const char *source, unsigned count)
+{
+ if (!from_user)
+ memcpy (dest, source, count);
+ else if (copy_from_user (dest, source, count))
+ return -EFAULT;
+ return count;
+}
+
+/*
+ * pl2303_buf_put
+ *
+ * Copy data data from a user buffer and put it into the circular buffer.
+ * Restrict to the amount of space available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned int pl2303_buf_put(struct pl2303_buf *pb, int from_user, const char *buf, unsigned int count)
+{
+ unsigned int len;
+
+ if (pb == NULL)
+ return 0;
+
+ len = pl2303_buf_space_avail(pb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = pb->buf_buf + pb->buf_size - pb->buf_put;
+ if (count > len) {
+ if (copy_in(pb->buf_put, from_user, buf, len) < 0)
+ return -EFAULT;
+ if (copy_in(pb->buf_buf, from_user, buf+len, count - len) < 0)
+ return -EFAULT;
+ pb->buf_put = pb->buf_buf + count - len;
+ } else {
+ if (copy_in(pb->buf_put, from_user, buf, count) < 0)
+ return -EFAULT;
+ if (count < len)
+ pb->buf_put += count;
+ else /* count == len */
+ pb->buf_put = pb->buf_buf;
+ }
+
+ return count;
+}
+
+/*
+ * pl2303_buf_get
+ *
+ * Get data from the circular buffer and copy to the given buffer.
+ * Restrict to the amount of data available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
+ unsigned int count)
+{
+ unsigned int len;
+
+ if (pb == NULL)
+ return 0;
+
+ len = pl2303_buf_data_avail(pb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = pb->buf_buf + pb->buf_size - pb->buf_get;
+ if (count > len) {
+ memcpy(buf, pb->buf_get, len);
+ memcpy(buf+len, pb->buf_buf, count - len);
+ pb->buf_get = pb->buf_buf + count - len;
+ } else {
+ memcpy(buf, pb->buf_get, count);
+ if (count < len)
+ pb->buf_get += count;
+ else /* count == len */
+ pb->buf_get = pb->buf_buf;
+ }
+
+ return count;
+}

static int pl2303_startup (struct usb_serial *serial)
{
@@ -191,14 +397,28 @@
for (i = 0; i < serial->num_ports; ++i) {
priv = kmalloc (sizeof (struct pl2303_private), GFP_KERNEL);
if (!priv)
- return -ENOMEM;
+ goto cleanup;
memset (priv, 0x00, sizeof (struct pl2303_private));
spin_lock_init(&priv->lock);
+ priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE);
+ if (priv->buf == NULL) {
+ kfree(priv);
+ goto cleanup;
+ }
init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(&serial->port[i], priv);
priv->type = type;
}
return 0;
+
+cleanup:
+ for (--i; i>=0; --i) {
+ priv = usb_get_serial_port_data(&serial->port[i]);
+ pl2303_buf_free(priv->buf);
+ kfree(priv);
+ usb_set_serial_port_data(&serial->port[i], NULL);
+ }
+ return -ENOMEM;
}

static int set_control_lines (struct usb_device *dev, u8 value)
@@ -212,42 +432,65 @@
return retval;
}

-static int pl2303_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
+static void pl2303_send(struct usb_serial_port *port)
{
- int result;
+ int count, result;
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;

- dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+ dbg("%s - port %d", __FUNCTION__, port->number);

- if (!count)
- return count;
+ spin_lock_irqsave(&priv->lock, flags);

- if (port->write_urb->status == -EINPROGRESS) {
- dbg("%s - already writing", __FUNCTION__);
- return 0;
+ if (priv->write_urb_in_use) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
}

- count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
- if (from_user) {
- if (copy_from_user (port->write_urb->transfer_buffer, buf, count))
- return -EFAULT;
- } else {
- memcpy (port->write_urb->transfer_buffer, buf, count);
+ count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer,
+ port->bulk_out_size);
+
+ if (count == 0) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
}

+ priv->write_urb_in_use = 1;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
usb_serial_debug_data (__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer);

port->write_urb->transfer_buffer_length = count;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb (port->write_urb);
- if (result)
+ if (result) {
err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
- else
- result = count;
+ priv->write_urb_in_use = 0;
+ // TODO: reschedule pl2303_send
+ }

- return result;
+ wake_up_interruptible(&port->tty->write_wait); /* this, at very least, wakes up pl2303_close */
}
+
+static int pl2303_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;

+ dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+
+ if (!count)
+ return count;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ count = pl2303_buf_put(priv->buf, from_user, buf, count);
+ spin_unlock_irqrestore(&priv->lock, flags);

+ pl2303_send(port);
+
+ return count;
+}

static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios)
{
@@ -278,6 +521,7 @@

cflag = port->tty->termios->c_cflag;
/* check that they really want us to change something */
+ /* important to do this as even a null change can corrupt data in transit */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
@@ -299,7 +543,6 @@
dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);

-
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
case CS5: buf[6] = 5; break;
@@ -311,28 +554,7 @@
dbg("%s - data bits = %d", __FUNCTION__, buf[6]);
}

- baud = 0;
- switch (cflag & CBAUD) {
- case B0: baud = 0; break;
- case B75: baud = 75; break;
- case B150: baud = 150; break;
- case B300: baud = 300; break;
- case B600: baud = 600; break;
- case B1200: baud = 1200; break;
- case B1800: baud = 1800; break;
- case B2400: baud = 2400; break;
- case B4800: baud = 4800; break;
- case B9600: baud = 9600; break;
- case B19200: baud = 19200; break;
- case B38400: baud = 38400; break;
- case B57600: baud = 57600; break;
- case B115200: baud = 115200; break;
- case B230400: baud = 230400; break;
- case B460800: baud = 460800; break;
- default:
- err ("pl2303 driver does not support the baudrate requested (fix it)");
- break;
- }
+ baud = tty_get_baud_rate(port->tty);
dbg("%s - baud = %d", __FUNCTION__, baud);
if (baud) {
buf[0] = baud & 0xff;
@@ -410,6 +632,13 @@
VENDOR_WRITE_REQUEST_TYPE,
0x0, index, NULL, 0, 100);
dbg ("0x40:0x1:0x0:0x%x %d", index, i);
+ } else {
+ i = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ VENDOR_WRITE_REQUEST,
+ VENDOR_WRITE_REQUEST_TYPE,
+ 0x0, 0x0, NULL, 0, 100);
+ dbg ("0x40:0x1:0x0:0x0 %d", i);
}

kfree (buf);
@@ -420,8 +649,8 @@
{
struct termios tmp_termios;
struct usb_serial *serial = port->serial;
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
- struct pl2303_private *priv = port->private;
int result;

if (port_paranoia_check (port, __FUNCTION__))
@@ -429,8 +658,10 @@

dbg("%s - port %d", __FUNCTION__, port->number);

- usb_clear_halt(serial->dev, port->write_urb->pipe);
- usb_clear_halt(serial->dev, port->read_urb->pipe);
+ if (priv->type != HX) {
+ usb_clear_halt(serial->dev, port->write_urb->pipe);
+ usb_clear_halt(serial->dev, port->read_urb->pipe);
+ }

buf = kmalloc(10, GFP_KERNEL);
if (buf==NULL)
@@ -500,10 +731,12 @@
static void pl2303_close (struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial;
- struct pl2303_private *priv;
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int c_cflag;
int result;
+ long timeout;
+ wait_queue_t wait;

if (port_paranoia_check (port, __FUNCTION__))
return;
@@ -513,6 +746,43 @@

dbg("%s - port %d", __FUNCTION__, port->number);

+ /* wait for data to drain from the buffer */
+ spin_lock_irqsave(&priv->lock, flags);
+ timeout = PL2303_CLOSING_WAIT;
+ init_waitqueue_entry(&wait, current);
+ add_wait_queue(&port->tty->write_wait, &wait);
+ for (;;) {
+ dbg("%s - buf_data_avail %d",
+ __FUNCTION__, pl2303_buf_data_avail(priv->buf));
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (pl2303_buf_data_avail(priv->buf) == 0 ||
+ timeout == 0 || signal_pending(current))
+ break;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ timeout = schedule_timeout(timeout);
+ spin_lock_irqsave(&priv->lock, flags);
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->tty->write_wait, &wait);
+ /* clear out any remaining data in the buffer */
+ pl2303_buf_clear(priv->buf);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* wait for characters to drain from the device */
+ /* (this is long enough for the entire 256 byte */
+ /* pl2303 hardware buffer to drain with no flow */
+ /* control for data rates of 1200 bps or more, */
+ /* for lower rates we should really know how much */
+ /* data is in the buffer to compute a delay */
+ /* that is not unnecessarily long) */
+ int bps = tty_get_baud_rate(port->tty);
+ if (bps > 1200)
+ timeout = max((HZ*2560)/bps,HZ/10);
+ else
+ timeout = 2*HZ;
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(timeout);
+
if (serial->dev) {
if (port->tty) {
c_cflag = port->tty->termios->c_cflag;
@@ -700,34 +970,68 @@
dbg("%s - error sending break = %d", __FUNCTION__, result);
}

-
static void pl2303_shutdown (struct usb_serial *serial)
{
int i;
+ struct pl2303_private *priv;

dbg("%s", __FUNCTION__);

for (i = 0; i < serial->num_ports; ++i) {
- kfree (usb_get_serial_port_data(&serial->port[i]));
- usb_set_serial_port_data(&serial->port[i], NULL);
- }
+ priv = usb_get_serial_port_data(&serial->port[i]);
+ if (priv) {
+ pl2303_buf_free(priv->buf);
+ kfree(priv);
+ usb_set_serial_port_data(&serial->port[i], NULL);
+ }
+ }
}

+static void pl2303_update_line_status(struct usb_serial_port *port,
+ unsigned char *data,
+ unsigned int actual_length)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 status_idx = UART_STATE;
+ u8 length = UART_STATE + 1;
+ u16 idv, idp;
+
+ idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
+ idp = le16_to_cpu(port->serial->dev->descriptor.idProduct);
+
+
+ if (idv == SIEMENS_VENDOR_ID) {
+ if (idp == SIEMENS_PRODUCT_ID_X65 ||
+ idp == SIEMENS_PRODUCT_ID_SX1 ||
+ idp == SIEMENS_PRODUCT_ID_X75) {
+
+ length = 1;
+ status_idx = 0;
+ }
+ }
+
+ if (actual_length < length)
+ return;
+
+ /* Save off the uart status for others to look at */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_status = data[status_idx];
+ spin_unlock_irqrestore(&priv->lock, flags);
+ wake_up_interruptible(&priv->delta_msr_wait);
+}

static void pl2303_read_int_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
- struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
- struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned char *data = urb->transfer_buffer;
- unsigned long flags;
- u8 uart_state;
+ int status = urb->status;

dbg("%s (%d)", __FUNCTION__, port->number);

/* ints auto restart... */

- switch (urb->status) {
+ switch (status) {
case 0:
/* success */
break;
@@ -735,34 +1039,26 @@
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- return;
- }
-
- if (!serial) {
- return;
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__, status);
+ goto exit;
}

usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer);

- if (urb->actual_length < UART_STATE)
- return;
-
- /* Save off the uart status for others to look at */
- uart_state = data[UART_STATE];
- spin_lock_irqsave(&priv->lock, flags);
- uart_state |= (priv->line_status & UART_STATE_TRANSIENT_MASK);
- priv->line_status = uart_state;
- spin_unlock_irqrestore(&priv->lock, flags);
- wake_up_interruptible (&priv->delta_msr_wait);
+ pl2303_update_line_status(port, data, urb->actual_length);

+exit:
+ status = usb_submit_urb(urb);
+ if (status)
+ err("%s - usb_submit_urb failed with result %d\n", __FUNCTION__, status);
+ else
+ dbg("%s - usb_submit_urb succeeded. peaches.", __FUNCTION__);
return;
}

-
static void pl2303_read_bulk_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
@@ -773,12 +1069,10 @@
unsigned long flags;
int i;
int result;
- u8 status;
+ int status = urb->status;
+ u8 line_status;
char tty_flag;

- if (port_paranoia_check (port, __FUNCTION__))
- return;
-
dbg("%s - port %d", __FUNCTION__, port->number);

if (!serial) {
@@ -786,17 +1080,16 @@
return;
}

- if (urb->status) {
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ if (status) {
+ dbg("%s - status = %d", __FUNCTION__, status);
if (!port->open_count) {
dbg("%s - port is closed, exiting.", __FUNCTION__);
return;
}
- if (urb->status == -EPROTO) {
+ if (status == -EPROTO) {
/* PL2303 mysteriously fails with -EPROTO reschedule the read */
dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__);
- urb->status = 0;
- urb->dev = serial->dev;
+ urb->dev = port->serial->dev;
result = usb_submit_urb(urb);
if (result)
err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
@@ -812,25 +1105,25 @@
tty_flag = TTY_NORMAL;

spin_lock_irqsave(&priv->lock, flags);
- status = priv->line_status;
+ line_status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
- wake_up_interruptible (&priv->delta_msr_wait); //AF from 2.6
+ wake_up_interruptible (&priv->delta_msr_wait);

/* break takes precedence over parity, */
/* which takes precedence over framing errors */
- if (status & UART_BREAK_ERROR )
+ if (line_status & UART_BREAK_ERROR )
tty_flag = TTY_BREAK;
- else if (status & UART_PARITY_ERROR)
+ else if (line_status & UART_PARITY_ERROR)
tty_flag = TTY_PARITY;
- else if (status & UART_FRAME_ERROR)
+ else if (line_status & UART_FRAME_ERROR)
tty_flag = TTY_FRAME;
dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag);

tty = port->tty;
if (tty && urb->actual_length) {
/* overrun is special, not associated with a char */
- if (status & UART_OVERRUN_ERROR)
+ if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);

for (i = 0; i < urb->actual_length; ++i) {
@@ -844,7 +1137,7 @@

/* Schedule the next read _if_ we are still open */
if (port->open_count) {
- urb->dev = serial->dev;
+ urb->dev = port->serial->dev;
result = usb_submit_urb(urb);
if (result)
err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
@@ -853,38 +1146,50 @@
return;
}

-
-
static void pl2303_write_bulk_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
int result;
+ int status = urb->status;

if (port_paranoia_check (port, __FUNCTION__))
return;

dbg("%s - port %d", __FUNCTION__, port->number);

- if (urb->status) {
+ switch (status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ status);
+ priv->write_urb_in_use = 0;
+ return;
+ default:
/* error in the urb, so we have to resubmit it */
if (serial_paranoia_check (port->serial, __FUNCTION__)) {
return;
}
dbg("%s - Overflow in write", __FUNCTION__);
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+ dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, status);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb (port->write_urb);
if (result)
err("%s - failed resubmitting write urb, error %d", __FUNCTION__, result);
-
- return;
+ else
+ return;
}

- queue_task(&port->tqueue, &tq_immediate);
- mark_bh(IMMEDIATE_BH);
+ priv->write_urb_in_use = 0;

- return;
+ /* send any buffered data */
+ pl2303_send(port);
}


@@ -894,19 +1199,17 @@
retval = usb_serial_register(&pl2303_device);
if (retval)
goto failed_usb_serial_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_DESC);
return 0;
failed_usb_serial_register:
return retval;
}

-
static void __exit pl2303_exit (void)
{
usb_serial_deregister (&pl2303_device);
}

-
module_init(pl2303_init);
module_exit(pl2303_exit);




\
 
 \ /
  Last update: 2008-01-26 01:53    [W:0.088 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site