lkml.org 
[lkml]   [2007]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[BUG]: 2.6.19.2: Weird serial core issue
I insert one printk into drivers/serial/serial_core.c:
uart_set_termios() to describe the issue.
static void uart_set_termios(struct tty_struct *tty, struct termios
*old_termios)
{
----snip----
unsigned int cflag = tty->termios->c_cflag;

BUG_ON(!kernel_locked());
+++printk("new_termios flag: 0x%x, old_termios flag: 0x%x\n");
+++ cflag, old_termios->c_cflag);

----snip ----
}

When I telnet my board and run the following command:
---- root:~> stty -F /dev/ttyS0 -crtscts

I got the following result from the console of my board:
---- root:~>new_termios flag: 0x1cb1, old_termios flag: 0x80001cb1

That's correct. CRTSCTS flag is clear

But when I type "ENTER" key on the console, I got:
----root:~>new_termios flag: 0x80001cb1, old_termios flag: 0x1cb1

The CRTSCTS flag is set back. But I didn't set it back, I just type "ENTER".
I guess, Is it a serial core bug?

-Aubrey
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-01-31 11:53    [W:0.079 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site