Messages in this thread | | | Date | Wed, 30 Aug 2006 08:58:17 +0200 | From | "Patrizio Bassi" <> | Subject | Re: [BUG?] 2.6.17.x suspend problems |
| |
2006/8/29, Patrizio Bassi <patrizio.bassi@gmail.com>: > 2006/8/29, Rafael J. Wysocki <rjw@sisk.pl>: > > On Monday 28 August 2006 13:46, Patrizio Bassi wrote: > > > when i try to suspend my notebook i have problems with ide controller. > > > the copy lasts a lot and i get oops. > > > > I haven't seen any patches related to SIS chipsets recently. > > > > There is a chance the latest -mm will work, so you can try it (no warranty, > > though). If not, please file a bug report at http://bugzilla.kernel.org > > (with a Cc to rjwysocki@sisk.pl). > > > do you mean the .18-mm sources i guess, not the .17 ones. > > Ok, i'll try as soon as possibile. > > > > > > > Greetings, > > Rafael > > > > > > > Stopping tasks: ==========================================| > > > Shrinking memory... done (22776 pages freed) > > > pnp: Device 00:08 disabled. > > > swsusp: Need to copy 30898 pages > > > ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI - using IRQ 14 > > > eth0: Media Link Off > > > ACPI: PCI Interrupt 0000:00: 01.2[D] -> Link [LNKD] -> GSI 5 (level, > > > low) -> IRQ 5 > > > ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level, > > > low) -> IRQ 5 > > > ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level, > > > low) -> IRQ 5 > > > ACPI: PCI Interrupt 0000:00:01.6[B] -> Link [LNKB] -> GSI 5 (level, > > > low) -> IRQ 5 > > > PCI: Setting latency timer of device 0000:00:02.0 to 64 > > > PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was > > > 82100003, writing 82100007) > > > ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, > > > low) -> IRQ 11 > > > PM: Writing back config space on device 0000:00:0a.1 at offset 1 (was > > > 2100003, writing 82100007) > > > ACPI: PCI Interrupt 0000:00: 0a.1[B] -> Link [LNKC] -> GSI 5 (level, > > > low) -> IRQ 5 > > > pnp: Device 00:08 activated. > > > pnp: Failed to activate device 00:0c. > > > pnp: Failed to activate device 00:0d. > > > irq 14: nobody cared (try booting with the "irqpoll" option) > > > <c012c987> __report_bad_irq+0x2b/0x69 <c012cb3d> note_interrupt+0x178/0x1a7 > > > <c012c53d> handle_IRQ_event+0x22/0x4e <c012c5ce> __do_IRQ+0x65/0x8f > > > <c0104b2d> do_IRQ+0x19/0x24 <c01033da> common_interrupt+0x1a/0x20 > > > <c0118f4b> __do_softirq+0x2c/0x7f <c0118fc0> do_softirq+0x22/0x26 > > > <c0104b32> do_IRQ+0x1e/0x24 <c01033da> common_interrupt+0x1a/0x20 > > > <c0214224> acpi_processor_idle+0x157/0x323 <c0101da2> cpu_idle+0x3a/0x4f > > > <c03b0635> start_kernel+0x29c/0x29e > > > handlers: > > > [<c0230301>] (ide_intr+0x0/0x16c) > > > Disabling IRQ #14 > > > Restarting tasks... done > > > hda: dma_timer_expiry: dma status == 0x24 > > > hda: DMA interrupt recovery > > > hda: lost interrupt > > > > > > CPU0 > > > 0: 431861 XT-PIC timer > > > 1: 638 XT-PIC i8042 > > > 2: 0 XT-PIC cascade > > > 5: 0 XT-PIC yenta, ohci_hcd:usb1, ohci_hcd:usb2, > > > Trident Audio, SiS630, eth0 > > > 7: 0 XT-PIC parport0 > > > 8: 2 XT-PIC rtc > > > 9: 1 XT-PIC acpi > > > 11: 0 XT-PIC yenta > > > 12: 10982 XT-PIC i8042 > > > 14: 200771 XT-PIC ide0 > > > 15: 26 XT-PIC ide1 > > > NMI: 0 > > > LOC: 0 > > > ERR: 0 > > > MIS: 0 > > > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11) > > > 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) > > > 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) > > > 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 > > > PCI Fast Ethernet (rev 80) > > > 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 > > > Controller (rev 07) > > > 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 > > > Controller (rev 07) > > > 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] > > > SiS PCI Audio Accelerator (rev 01) > > > 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem > > > Controller (rev a0) > > > 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual > > > PCI-to-PCI bridge (AGP) > > > 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) > > > 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) > > > 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] > > > 630/730 PCI/AGP VGA Display Adapter (rev 11) > > > > > > > > > > > > I have another two problems too: > > > 1) have to disable synaptics driver (editing sources) otherwise i get > > > kernel panic > > > 2) dri accelleration is working no more after suspend. glxgears shows > > > a black window only. > > > > > > i think i should open 2 different threads for the last two. > > > > > > please CC me, i'm not subscribed. > > > > > > > > > > -- > > You never change things by fighting the existing reality. > > R. Buckminster Fuller > >
i just tested 2.6.18-rc4-mm3.
as soon as i ask for suspending i get a black screen. waiting for lots of time...something like 1 min i see:
Disabling Interrupt #14 and after, even waiting some means...nothing more.
2.6.18-rc5 gives me a panic:
www.patriziobassi.it/b.jpg
i see the same like, but the interrupt is disabled immediatly, without waiting for a long time as rc4-mm3.
and now it seems to crash due to the synaptics problem i announced in my first mail. maybe fixing that may allow me to suspend.
Ready to test patches!
(please always CC me, i'm not subscribed)
ps. my config www.patriziobassi.it/config
--
Patrizio Bassi www.patriziobassi.it - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |