lkml.org 
[lkml]   [2006]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG?] 2.6.17.x suspend problems
2006/8/29, Rafael J. Wysocki <rjw@sisk.pl>:
> On Monday 28 August 2006 13:46, Patrizio Bassi wrote:
> > when i try to suspend my notebook i have problems with ide controller.
> > the copy lasts a lot and i get oops.
>
> I haven't seen any patches related to SIS chipsets recently.
>
> There is a chance the latest -mm will work, so you can try it (no warranty,
> though). If not, please file a bug report at http://bugzilla.kernel.org
> (with a Cc to rjwysocki@sisk.pl).


do you mean the .18-mm sources i guess, not the .17 ones.

Ok, i'll try as soon as possibile.



>
> Greetings,
> Rafael
>
>
> > Stopping tasks: ==========================================|
> > Shrinking memory... done (22776 pages freed)
> > pnp: Device 00:08 disabled.
> > swsusp: Need to copy 30898 pages
> > ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI - using IRQ 14
> > eth0: Media Link Off
> > ACPI: PCI Interrupt 0000:00: 01.2[D] -> Link [LNKD] -> GSI 5 (level,
> > low) -> IRQ 5
> > ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level,
> > low) -> IRQ 5
> > ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level,
> > low) -> IRQ 5
> > ACPI: PCI Interrupt 0000:00:01.6[B] -> Link [LNKB] -> GSI 5 (level,
> > low) -> IRQ 5
> > PCI: Setting latency timer of device 0000:00:02.0 to 64
> > PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was
> > 82100003, writing 82100007)
> > ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level,
> > low) -> IRQ 11
> > PM: Writing back config space on device 0000:00:0a.1 at offset 1 (was
> > 2100003, writing 82100007)
> > ACPI: PCI Interrupt 0000:00: 0a.1[B] -> Link [LNKC] -> GSI 5 (level,
> > low) -> IRQ 5
> > pnp: Device 00:08 activated.
> > pnp: Failed to activate device 00:0c.
> > pnp: Failed to activate device 00:0d.
> > irq 14: nobody cared (try booting with the "irqpoll" option)
> > <c012c987> __report_bad_irq+0x2b/0x69 <c012cb3d> note_interrupt+0x178/0x1a7
> > <c012c53d> handle_IRQ_event+0x22/0x4e <c012c5ce> __do_IRQ+0x65/0x8f
> > <c0104b2d> do_IRQ+0x19/0x24 <c01033da> common_interrupt+0x1a/0x20
> > <c0118f4b> __do_softirq+0x2c/0x7f <c0118fc0> do_softirq+0x22/0x26
> > <c0104b32> do_IRQ+0x1e/0x24 <c01033da> common_interrupt+0x1a/0x20
> > <c0214224> acpi_processor_idle+0x157/0x323 <c0101da2> cpu_idle+0x3a/0x4f
> > <c03b0635> start_kernel+0x29c/0x29e
> > handlers:
> > [<c0230301>] (ide_intr+0x0/0x16c)
> > Disabling IRQ #14
> > Restarting tasks... done
> > hda: dma_timer_expiry: dma status == 0x24
> > hda: DMA interrupt recovery
> > hda: lost interrupt
> >
> > CPU0
> > 0: 431861 XT-PIC timer
> > 1: 638 XT-PIC i8042
> > 2: 0 XT-PIC cascade
> > 5: 0 XT-PIC yenta, ohci_hcd:usb1, ohci_hcd:usb2,
> > Trident Audio, SiS630, eth0
> > 7: 0 XT-PIC parport0
> > 8: 2 XT-PIC rtc
> > 9: 1 XT-PIC acpi
> > 11: 0 XT-PIC yenta
> > 12: 10982 XT-PIC i8042
> > 14: 200771 XT-PIC ide0
> > 15: 26 XT-PIC ide1
> > NMI: 0
> > LOC: 0
> > ERR: 0
> > MIS: 0
> > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
> > 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
> > 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
> > 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
> > PCI Fast Ethernet (rev 80)
> > 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> > Controller (rev 07)
> > 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> > Controller (rev 07)
> > 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
> > SiS PCI Audio Accelerator (rev 01)
> > 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
> > Controller (rev a0)
> > 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
> > PCI-to-PCI bridge (AGP)
> > 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> > 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> > 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
> > 630/730 PCI/AGP VGA Display Adapter (rev 11)
> >
> >
> >
> > I have another two problems too:
> > 1) have to disable synaptics driver (editing sources) otherwise i get
> > kernel panic
> > 2) dri accelleration is working no more after suspend. glxgears shows
> > a black window only.
> >
> > i think i should open 2 different threads for the last two.
> >
> > please CC me, i'm not subscribed.
> >
> >
>
> --
> You never change things by fighting the existing reality.
> R. Buckminster Fuller
>


--

Patrizio Bassi
www.patriziobassi.it
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-08-29 13:17    [from the cache]
©2003-2011 Jasper Spaans