lkml.org 
[lkml]   [2006]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: I/OAT configuration ?
Date
From
> From: Ravinandan Arakali
>
> Hi,
> I am trying to use I/OAT on one of the newer woodcrest boxes.
> But not sure if things are configured properly since there
> seems to be no change in performance with I/OAT enabled
> or disabled.
> Following are the steps followed.
> 1. MSI (CONFIG_PCI_MSI) is enabled in kernel(2.6.16.21).
> 2. In kernel DMA configuration, following are enabled.
> Support for DMA Engines
> Network: TCP receive copy offload
> Test DMA Client
> Intel I/OAT DMA support
> 3. I manually load the ioatdma driver (modprobe ioatdma)
>
> As per some documentation I read, when step #3 is performed
> successfully, directories dma0chanX is supposed to be created
> under /sys/class/dma but in my case, this directory stays
> empty. I don't see any messages in /var/log/messages.
> Any idea what is missing ?

Does a PCI device with vendor ID 8086 and device ID 1a38 show up in
lspci? That's the embedded DMA engine in the MCH. It's only in the
5000 series chipsets, and may require a BIOS setting to enable. It
should show up as bus 0 device 8 (00:08.0).

- Chris
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-08-18 18:59    [W:0.030 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site