lkml.org 
[lkml]   [2006]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.17-rc3 PCI init hang
I have a dual Pentium III I use for testing.  Since late last week 
(around about 2.6.17-rc3) it hangs during boot just after "Setting up
standard PCI resources". 2.6.17-rc2 works fine.

A push in the right direction would be appreciated. Please reply off
list as I'm not subscribed.

...

PCI: PCI BIOS revision 2.10 entry at 0xfdbc1, last bus=1
Setting up standard PCI resources

>>> 2.6.17-rc3 stops here and hangs.
>>> 2.6.17-rc2 continues with:

PCI: Probing PCI hardware
PCI: Discovered peer bus 01
PCI: Using IRQ router ServerWorks [1166/0200] at 0000:00:0f.0
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
PCI->APIC IRQ transform: 0000:01:03.0[A] -> IRQ 23
PCI: Cannot allocate resource region 0 of device 0000:00:0f.2
...

lspci -v:

00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
Flags: bus master, medium devsel, latency 32

00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
Flags: bus master, medium devsel, latency 16

00:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL
Flags: bus master, stepping, medium devsel, latency 64
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at d800 [size=256]
Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <available only to root>

00:03.0 RAID bus controller: Promise Technology, Inc. PDC20267
(FastTrak100/Ultra100) (rev 02)
Subsystem: Promise Technology, Inc.: Unknown device 4d32
Flags: bus master, medium devsel, latency 64, IRQ 31
I/O ports at dfe0 [size=8]
I/O ports at dfac [size=4]
I/O ports at dfa0 [size=8]
I/O ports at dfa8 [size=4]
I/O ports at df00 [size=64]
Memory at feaa0000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at feae0000 [size=64K]
Capabilities: <available only to root>

00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50)
Subsystem: Broadcom OSB4 South Bridge
Flags: bus master, medium devsel, latency 0

00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master
SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at ffa0 [size=16]

00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 04)
(prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
Flags: medium devsel
Memory at 30000000 (32-bit, non-prefetchable) [size=4K]

01:03.0 Ethernet controller: Netgear GA630 Gigabit Ethernet (rev 01)
Subsystem: Netgear GA630 Gigabit Ethernet
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 23
Memory at febfc000 (32-bit, non-prefetchable) [size=16K]

--
corporate: <cel at netapp dot com>
personal: <chucklever at bigfoot dot com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-05-01 21:06    [W:0.038 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site