lkml.org 
[lkml]   [2006]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject[BUG] 2.6.17-rc1: SCSI kobject_add problems
Date
From
System is a DEC Alpha 433au with two SCSI disks.  SCSI controller is a
QLA1040 supported by the qla1280 driver. Runs 2.6.16 fine. Tried
booting 2.6.17-rc1 and got

kobject_add failed for 0:0: with -EEXIST, don't try to register things with the same name in the same directory

and a fairly long trace output when the system attempted to add sdb.
Not surprisingly, sdb was inaccessible.

Normally (for 2.6.16 anyway), the following relationship exists:

sd 0:0:0:0 sda
sd 0:0:1:0 sdb

More information *might* be available if needed, but will have to be
transcribed by hand. My /usr partition is on sdb, so I don't get very
far with 2.6.17-rc1 on Alpha :-). The problem is probably specific to
the qla1280 or the Alpha, as I have a x86 Adaptec SCSI-based system
with multiple spindles that works fine with 2.6.17-rc1.

--
-----------------------------------------------------------------------
Bob Tracy WTO + WIPO = DMCA? http://www.anti-dmca.org
rct@frus.com
-----------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-04-07 20:33    [W:0.073 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site