Messages in this thread | | | Date | Sun, 30 Apr 2006 09:28:20 -0700 | From | masouds@masoud ... | Subject | [BUG] VIA quirk fixup failure after 2.6.17-rc3 |
| |
Hello Chris, My machine's tulip card stopped working after I updated to 2.6.17-rc3.git3 which included 75cf7456dd87335f574dcd53c4ae616a2ad71a11 patch of yours. Revesing it made the problem go away; Is there a chance that a VIA pci_id was missed from the list of quirks in your patch? The problem was that bringing up this interface always failed with 'IRQ #177: nobody cared!': --- Apr 30 08:44:54 localhost kernel: irq 177: nobody cared (try booting with the "irqpoll" option) Apr 30 08:44:54 localhost kernel: <c10500f4> __report_bad_irq+0x24/0x90 <c10501df> note_interrupt+0x7f/0x240 Apr 30 08:44:54 localhost kernel: <c1022add> rebalance_tick+0x10d/0x2d0 <c104f9f3> handle_IRQ_event+0x33/0x70 Apr 30 08:44:54 localhost kernel: <c104fb22> __do_IRQ+0xf2/0x100 <c1007553> do_IRQ+0x23/0x40 Apr 30 08:44:54 localhost kernel: <c1003d10> default_idle+0x0/0x60 <c1005bf6> common_interrupt+0x1a/0x20 Apr 30 08:44:54 localhost kernel: <c1003d10> default_idle+0x0/0x60 <c1003d3c> default_idle+0x2c/0x60 Apr 30 08:44:54 localhost kernel: <c1003dcf> cpu_idle+0x5f/0xf0 Apr 30 08:44:54 localhost kernel: handlers: Apr 30 08:44:54 localhost kernel: [pg0+392112128/1051796480] (tulip_interrupt+0x0/0xee0 [tulip]) Apr 30 08:44:54 localhost kernel: Disabling IRQ #177 Apr 30 08:45:04 localhost kernel: eth0: no IPv6 routers present Apr 30 08:48:21 localhost kernel: NETDEV WATCHDOG: eth0: transmit timed out Apr 30 08:48:21 localhost kernel: eth0: Transmit timed out, status e4670045, CSR12 45e1d0cc, resetting... ----
Manually removing that patch made things work again. The machine is a MSI-694D2-Pro2 dual CPU P3/866Mhz machine with 384 megs of ram. For more info, here is my 'lspci -vv' output:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d0000000-d1ffffff Prefetchable memory behind bridge: d2000000-d2ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at 9000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at 9400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at 9800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 11 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0c.0 RAID bus controller: Promise Technology, Inc. PDC20265 (FastTrak100 Lite/Ultra100) (rev 02) Subsystem: Promise Technology, Inc. Ultra100 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 169 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at b000 [size=4] Region 2: I/O ports at b400 [size=8] Region 3: I/O ports at b800 [size=4] Region 4: I/O ports at bc00 [size=64] Region 5: Memory at d4000000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at 20040000 [disabled] [size=64K] Capabilities: [58] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 25) Subsystem: National Datacomm Corp: Unknown device 8110 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 177 Region 0: I/O ports at c000 [size=256] Region 1: Memory at d4020000 (32-bit, non-prefetchable) [size=256] Expansion ROM at 20000000 [disabled] [size=256K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 43) Subsystem: D-Link System Inc DFE-530TX rev A Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 169 Region 0: I/O ports at c400 [size=256] Region 1: Memory at d4021000 (32-bit, non-prefetchable) [size=256] Expansion ROM at 20050000 [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: Intel Corp. 82740 (i740) AGP Graphics Accelerator (rev 21) (prog-if 00 [VGA]) Subsystem: Diamond Multimedia Systems Stealth II G460 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at d2000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at d1000000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at d0000000 [disabled] [size=256K] Capabilities: [d0] AGP version 1.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
------------- cheers, Masoud Sharbiani - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |