Messages in this thread | | | Date | Mon, 13 Mar 2006 20:39:02 -0600 | From | Robert Hancock <> | Subject | 2.6.16-rc6 sleeping function called from invalid context on ACPI resume |
| |
Seeing this on ACPI resume on a Compaq Presario X1050 laptop (with Alan's PATA libata patch but that seems unrelated):
Debug: sleeping function called from invalid context at mm/slab.c:2729 in_atomic():0, irqs_disabled():1 [<c015efb4>] kmem_cache_alloc+0x54/0x70 [<c021137e>] acpi_os_acquire_object+0xb/0x36 [<c0225f37>] acpi_ut_allocate_object_desc_dbg+0x10/0x3e [<c0225faa>] acpi_ut_create_internal_object_dbg+0xf/0x5e [<c02225fb>] acpi_rs_set_srs_method_data+0x3d/0xba [<c010664c>] get_cmos_time+0x15c/0x170 [<c0229864>] acpi_pci_link_set+0xf4/0x168 [<c022990c>] irqrouter_resume+0x34/0x52 [<c0260791>] __sysdev_resume+0x11/0x80 [<c0260847>] sysdev_resume+0x47/0x70 [<c02658a5>] device_power_up+0x5/0x10 [<c013ce55>] enter_state+0x175/0x1d0 [<c013cf45>] state_store+0x95/0xb0 [<c013ceb0>] state_store+0x0/0xb0 [<c01a29d9>] subsys_attr_store+0x29/0x40 [<c01a2fa0>] sysfs_write_file+0xa0/0xf0 [<c01a2f00>] sysfs_write_file+0x0/0xf0 [<c01628af>] vfs_write+0xbf/0x180 [<c01632b1>] sys_write+0x41/0x70 [<c0102e3d>] syscall_call+0x7/0xb
Full dmesg attached.
Also ACPI resume remains busted on this laptop, but this is not a new issue: http://bugzilla.kernel.org/show_bug.cgi?id=6075
-- Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from hancockr@nospamshaw.ca Home Page: http://www.roberthancock.com/
Linux version 2.6.16-rc6-ide1 (rob@Banias) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Mon Mar 13 19:40:18 CST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved) BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS) BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131024 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 126928 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 COMPAQ ) @ 0x000f6560 ACPI: RSDT (v001 HP CPQ0860 0x14070520 CPQ 0x00000001) @ 0x1fff0c84 ACPI: FADT (v002 HP CPQ0860 0x00000002 CPQ 0x00000001) @ 0x1fff0c00 ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x1fff5c3c ACPI: DSDT (v001 HP nx7000 0x00010000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) Built 1 zonelists Kernel command line: ro root=LABEL=/ Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01404000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c041a000 soft=c041b000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1395.679 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513976k/524096k available (2210k kernel code, 9524k reserved, 736k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2795.37 BogoMIPS (lpj=5590740) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0c20) checking if image is initramfs... it is Freeing initrd memory: 1070k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C046] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.C046] bus is 0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT] ACPI: Embedded Controller [C0EA] (gpe 28) interrupt mode. ACPI: Power Resource [C18D] (on) ACPI: Power Resource [C195] (on) ACPI: Power Resource [C19C] (on) ACPI: Power Resource [C1A6] (on) ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10) ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10) ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10) ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10) ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11 ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved pnp: 00:0d: ioport range 0x1100-0x113f has been reserved pnp: 00:0d: ioport range 0x1200-0x121f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: 90400000-904fffff PREFETCH window: 98000000-9fffffff PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00002800-000028ff IO window: 00002c00-00002cff PREFETCH window: 30000000-31ffffff MEM window: 34000000-35ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: 90000000-903fffff PREFETCH window: 30000000-31ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1142279690.764:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 256M @ 0xb0000000 PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:1f.6 disabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize libata version 1.20 loaded. ata_piix 0000:00:1f.1: version 1.05-ac7 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x4C40 irq 14 ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6003 85:3c69 86:3e01 87:6003 88:203f ata1: dev 0 ATA-7, max UDMA/100, 156368016 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: SAMSUNG MP0804H Rev: UE20 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4C48 irq 15 ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VH04 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: Attached scsi disk sda usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 7, 524288 bytes) TCP bind hash table entries: 32768 (order: 7, 655360 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: C058 C1AD C1A3 C1A4 C0AC C0B3 C0B4 C0B5 C0E7 C136 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 204k freed Write protecting the kernel read-only data: 345k input: AT Translated Set 2 keyboard as /class/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input1 security: 3 users, 6 roles, 878 types, 101 bools security: 55 classes, 239681 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda5, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 eth0: RTL-8139C+ at 0xe0874000, 00:02:3f:65:4d:74, IRQ 10 8139too Fast Ethernet driver 0.9.27 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55431 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.6 to 64 hw_random: cannot enable RNG, aborting ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C9] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 Yenta: CardBus bridge found at 0000:02:04.0 [0e11:0860] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x001c1112, devctl 0x44 Yenta: ISA IRQ mask 0x08d8, PCI irq 5 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[90200000-902007ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: AC Adapter [C134] (on-line) ACPI: Battery Slot [C11F] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [C1BE] ACPI: Lid Switch [C136] ibm_acpi: ec object not found ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f383800c298] device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x140-0x14f 0x200-0x20f 0x370-0x37f 0x3f0-0x3ff cs: IO port probe 0xa00-0xaff: clean. eth0: link down audit(1142301321.594:2): avc: denied { read } for pid=2277 comm="auditd" name="[5706]" dev=pipefs ino=5706 scontext=system_u:system_r:auditd_t tcontext=system_u:system_r:auditd_t tclass=fifo_file SELinux: initialized (dev autofs, type autofs), uses genfs_contexts parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 [drm] Initialized radeon 1.22.0 20051229 on minor 0 mtrr: 0x98000000,0x8000000 overlaps existing 0x98000000,0x2000000 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Loading R200 Microcode end_request: I/O error, dev sr0, sector 16004352 Buffer I/O error on device sr0, logical block 2000544 end_request: I/O error, dev sr0, sector 16004352 Buffer I/O error on device sr0, logical block 2000544 UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'FIGHTCLB', timestamp 2000/04/05 13:07 (1e98) SELinux: initialized (dev sr0, type udf), uses genfs_contexts Adding 1232272k swap on /dev/sda3. Priority:-1 extents:1 across:1232272k NTFS driver 2.1.26 [Flags: R/O MODULE]. NTFS volume version 3.1. SELinux: initialized (dev sda1, type ntfs), uses genfs_contexts eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready audit(:0): major=252 name_count=0: freeing multiple contexts (1) audit(:0): major=113 name_count=0: freeing multiple contexts (2) Stopping tasks: ==============================================================================================| pnp: Device 00:05 disabled. pnp: Device 00:03 disabled. ACPI: PCI interrupt for device 0000:02:04.0 disabled eth1: Going into suspend... ACPI: PCI interrupt for device 0000:02:02.0 disabled ACPI: PCI interrupt for device 0000:00:1f.6 disabled ACPI: PCI interrupt for device 0000:00:1f.5 disabled ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Debug: sleeping function called from invalid context at mm/slab.c:2729 in_atomic():0, irqs_disabled():1 [<c015efb4>] kmem_cache_alloc+0x54/0x70 [<c021137e>] acpi_os_acquire_object+0xb/0x36 [<c0225f37>] acpi_ut_allocate_object_desc_dbg+0x10/0x3e [<c0225faa>] acpi_ut_create_internal_object_dbg+0xf/0x5e [<c02225fb>] acpi_rs_set_srs_method_data+0x3d/0xba [<c010664c>] get_cmos_time+0x15c/0x170 [<c0229864>] acpi_pci_link_set+0xf4/0x168 [<c022990c>] irqrouter_resume+0x34/0x52 [<c0260791>] __sysdev_resume+0x11/0x80 [<c0260847>] sysdev_resume+0x47/0x70 [<c02658a5>] device_power_up+0x5/0x10 [<c013ce55>] enter_state+0x175/0x1d0 [<c013cf45>] state_store+0x95/0xb0 [<c013ceb0>] state_store+0x0/0xb0 [<c01a29d9>] subsys_attr_store+0x29/0x40 [<c01a2fa0>] sysfs_write_file+0xa0/0xf0 [<c01a2f00>] sysfs_write_file+0x0/0xf0 [<c01628af>] vfs_write+0xbf/0x180 [<c01632b1>] sys_write+0x41/0x70 [<c0102e3d>] syscall_call+0x7/0xb PCI: Enabling device 0000:00:1d.0 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb2: root hub lost power or was reset PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb3: root hub lost power or was reset PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb4: root hub lost power or was reset PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C9] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.7 to 64 usb usb1: root hub lost power or was reset ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 PCI: Enabling device 0000:02:00.0 (0080 -> 0083) ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 PCI: Via IRQ fixup for 0000:02:00.0, from 0 to 10 eth1: Coming out of suspend... PCI: Enabling device 0000:02:02.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 pnp: Device 00:03 activated. pnp: Device 00:05 activated. pnp: Device 00:0a does not supported activation. pnp: Device 00:0b does not supported activation. i8042: failed to resume active multiplexor, mouse won't work. ata1: dev 0 configured for UDMA/100 ata2: dev 0 configured for UDMA/33 Restarting tasks... done ACPI: read EC, IB not empty ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for [EmbeddedControl] [20060127] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands for [AE_NOT_CONFIGURED] [20060127] ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C046.C059.C0EA.C11D] (Node dfea0280), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_WAK] (Node c14dc500), AE_TIME ACPI Exception (hwsleep-0546): AE_TIME, During Method _WAK [20060127] ACPI: read EC, IB not empty ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for [EmbeddedControl] [20060127] ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C046.C059.C0EA.C132] (Node dfea01e0), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C132] (Node c14dde20), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C11F._BST] (Node c14ddd60), AE_TIME audit(:0): major=252 name_count=0: freeing multiple contexts (1) audit(:0): major=113 name_count=0: freeing multiple contexts (2) audit(:0): major=252 name_count=0: freeing multiple contexts (1) audit(:0): major=113 name_count=0: freeing multiple contexts (2) agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Loading R200 Microcode ACPI: read EC, IB not empty ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for [EmbeddedControl] [20060127] ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C046.C059.C0EA.C132] (Node dfea01e0), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C132] (Node c14dde20), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C11F._BST] (Node c14ddd60), AE_TIME ACPI: read EC, IB not empty ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for [EmbeddedControl] [20060127] ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C046.C059.C0EA.C132] (Node dfea01e0), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C132] (Node c14dde20), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C11F._BST] (Node c14ddd60), AE_TIME ACPI: read EC, IB not empty ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for [EmbeddedControl] [20060127] ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C046.C059.C0EA.C132] (Node dfea01e0), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C132] (Node c14dde20), AE_TIME ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.C11F._BST] (Node c14ddd60), AE_TIME
| |