Messages in this thread | | | Subject | Problem with sata driver | Date | Sat, 11 Mar 2006 17:08:13 +0200 | From | "Sion Khalaf" <> |
| |
Hi,
I am having problem with Sata Drive /dev/sda
Board from SuperMicro With Nvidia ChipSet - H8DCE The board has 8 x SATA ports, but only one SATA Drive is connected (Maxtor 500 GB )
Kernel 2.6.15 I insert the module : insmod sata_nv.ko Then, udevstart
Fdisk Output: ------------------------------------------------------------------- [root@880-TEST root]$ fdisk -l
Disk /dev/hda: 262 MB, 262144000 bytes 16 heads, 32 sectors/track, 1000 cylinders Units = cylinders of 512 * 512 = 262144 bytes
Device Boot Start End Blocks Id System /dev/hda1 * 1 998 255487+ 83 Linux
Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System [root@880-TEST root]$ ------------------------------------------------------------------------ ---- When trying to repartition the disk, I got into hangs. (Trying to save changes - w )
Attached is the dmesg, since inserting the module.
What is wrong ?
Thank you in advanced, Sion
************************************************************************ **********
sata_nv 0000:00:07.0: version 0.8 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 11 ata2: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 11 ata1: no device found (phy stat 00000000) scsi0 : sata_nv ata2: no device found (phy stat 00000000) scsi1 : sata_nv ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 9 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA400 irq 9 ata4: SATA max UDMA/133 cmd 0xAC00 ctl 0xA802 bmdma 0xA408 irq 9 ata3: no device found (phy stat 00000000) scsi2 : sata_nv nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4773 85:7c69 86:3e01 87:4763 88:407f ata4: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata4: dev 0 configured for UDMA/133 scsi3 : sata_nv Vendor: ATA Model: Maxtor 7H500F0 Rev: HA43 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI device sda: drive cache: write back sda:<4>nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed
sd 3:0:0:0: Attached scsi disk sda sd 3:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:80:07.0 to 64 ata5: SATA max UDMA/133 cmd 0xF800 ctl 0xF402 bmdma 0xE800 irq 9 ata6: SATA max UDMA/133 cmd 0xF000 ctl 0xEC02 bmdma 0xE808 irq 9 ata5: no device found (phy stat 00000000) scsi4 : sata_nv ata6: no device found (phy stat 00000000) scsi5 : sata_nv ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:80:08.0 to 64 ata7: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 9 ata8: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 9 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata7: no device found (phy stat 00000000) scsi6 : sata_nv ata8: no device found (phy stat 00000000) scsi7 : sata_nv ata4: command 0x35 timeout, stat 0xd0 host_stat 0x21 ata4: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata4: status=0xd0 { Busy } sd 3:0:0:0: SCSI error: return code = 0x8000002 sda: Current: sense key=0xb ASC=0x47 ASCQ=0x0 end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 lost page write due to I/O error on sda SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI device sda: drive cache: write back sda:<4>ATA: abnormal status 0xD0 on port 0xAC07 ATA: abnormal status 0xD0 on port 0xAC07 ATA: abnormal status 0xD0 on port 0xAC07 [root@880-TEST root]$ ************************************************************************ ********* - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |