lkml.org 
[lkml]   [2006]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RFC] [PATCH 2/2] Driver to remember ethernet MAC values: NSLU2 support
From: John Bowler <jbowler@acm.org>

Implement maclist support for the Linksys NSLU2. The MAC address is read
from the RedBoot partition in flash.

Signed-off-by: John Bowler <jbowler@acm.org>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Rod Whitby <rod@whitby.id.au>

--

arch/arm/mach-ixp4xx/Kconfig | 4 +--
arch/arm/mach-ixp4xx/nslu2-setup.c | 39 +++++++++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+), 2 deletions(-)

--- linux-nslu2.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2006-02-06 22:34:55.000000000 +0100
+++ linux-nslu2/arch/arm/mach-ixp4xx/nslu2-setup.c 2006-02-06 22:35:31.000000000 +0100
@@ -16,11 +16,14 @@
#include <linux/kernel.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>

+#include <net/maclist.h>
+
static struct flash_platform_data nslu2_flash_data = {
.map_name = "cfi_probe",
.width = 2,
@@ -117,6 +120,37 @@ static void nslu2_power_off(void)
gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
}

+/*
+ * When the RedBoot partition is added the MAC address is read from
+ * it.
+ */
+static void nslu2_flash_add(struct mtd_info *mtd) {
+ if (strcmp(mtd->name, "RedBoot") == 0) {
+ size_t retlen;
+ u_char mac[6];
+
+ /* The MAC is at a known offset... */
+ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
+ printk(KERN_INFO "NSLU2 MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+ maclist_add(mac);
+ } else {
+ printk(KERN_ERR "NSLU2 MAC: read failed\n");
+ }
+ }
+}
+
+/*
+ * Nothing to do on remove at present.
+ */
+static void nslu2_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier nslu2_flash_notifier = {
+ .add = nslu2_flash_add,
+ .remove = nslu2_flash_remove,
+};
+
static void __init nslu2_init(void)
{
/* The NSLU2 has a 33MHz crystal on board - 1.01% different
@@ -124,6 +158,11 @@ static void __init nslu2_init(void)
*/
ixp4xx_set_board_tick_rate(66000000);

+ /* The flash has an ethernet MAC embedded in it which we need,
+ * that is all this notifier does.
+ */
+ register_mtd_user(&nslu2_flash_notifier);
+
ixp4xx_sys_init();

pm_power_off = nslu2_power_off;
--
Martin Michlmayr
http://www.cyrius.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-02-20 02:05    [W:0.029 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site