[lkml]   [2006]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] Disable INTx when enabling MSI in forcedeth
On Tue, 2006-11-21 at 18:42 -0800, Linus Torvalds wrote:
> On Tue, 21 Nov 2006, Daniel Barkalow wrote:
> >
> > My nVidia ethernet card doesn't disable its own INTx when MSI is
> > enabled. This causes a steady stream of spurious interrupts that
> > eventually kills my SATA IRQ if MSI is used with forcedeth, which is
> > true by default. Simply disabling the INTx interrupt takes care of it.
> >
> > This is against -stable, and would be suitable once someone who knows the
> > code verifies that it's correct.
> I _really_ think that we should do this in pci_msi_enable().


> Screw cards that are not PCI-2.3 compliant - just make the rule be that if
> you use MSI, you _have_ to allow us to set the disable-INTx bit. It's then
> up to the drivers to decide if they can use MSI or not.
> (Even a number of cards that are not PCI-2.3 may simply not _implement_
> the disable-INTx bit, and in that case, they can use MSI if they disable
> INTx automatically - the ).
> Comments?

Do we know of any card that wants MSIs _and_ uses that bit for some
non-compliant purpose ?


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2006-11-22 08:13    [W:0.046 / U:8.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site