lkml.org 
[lkml]   [2006]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RFC, PATCH 2/2] OProfile for Cell: Initial profiling support

Add PPU event-based and cycle-based profiling support to Oprofile for Cell.

Signed-Off-By: Carl Love <carll@us.ibm.com>
Signed-Off-By: Maynard Johnson <mpjohn@us.ibm.com>

Index: linux-2.6.18/arch/powerpc/kernel/cputable.c
===================================================================
--- linux-2.6.18.orig/arch/powerpc/kernel/cputable.c 2006-11-06 14:54:53.493095704 -0600
+++ linux-2.6.18/arch/powerpc/kernel/cputable.c 2006-11-09 08:49:41.097159368 -0600
@@ -287,6 +287,9 @@
PPC_FEATURE_SMT,
.icache_bsize = 128,
.dcache_bsize = 128,
+ .num_pmcs = 4,
+ .oprofile_cpu_type = "ppc64/cell-be",
+ .oprofile_type = PPC_OPROFILE_CELL,
.platform = "ppc-cell-be",
},
{ /* PA Semi PA6T */
Index: linux-2.6.18/arch/powerpc/oprofile/common.c
===================================================================
--- linux-2.6.18.orig/arch/powerpc/oprofile/common.c 2006-09-19 22:42:06.000000000 -0500
+++ linux-2.6.18/arch/powerpc/oprofile/common.c 2006-11-09 18:50:18.673115320 -0600
@@ -136,6 +136,11 @@

switch (cur_cpu_spec->oprofile_type) {
#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_CELL
+ case PPC_OPROFILE_CELL:
+ model = &op_model_cell;
+ break;
+#endif
case PPC_OPROFILE_RS64:
model = &op_model_rs64;
break;
@@ -147,6 +152,7 @@
model = &op_model_7450;
break;
#endif
+
#ifdef CONFIG_FSL_BOOKE
case PPC_OPROFILE_BOOKE:
model = &op_model_fsl_booke;
Index: linux-2.6.18/arch/powerpc/oprofile/Makefile
===================================================================
--- linux-2.6.18.orig/arch/powerpc/oprofile/Makefile 2006-09-19 22:42:06.000000000 -0500
+++ linux-2.6.18/arch/powerpc/oprofile/Makefile 2006-11-09 08:49:41.100158912 -0600
@@ -11,6 +11,7 @@
timer_int.o )

oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
+oprofile-$(CONFIG_PPC_CELL) += op_model_cell.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o
oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
oprofile-$(CONFIG_PPC32) += op_model_7450.o
Index: linux-2.6.18/arch/powerpc/oprofile/op_model_cell.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/arch/powerpc/oprofile/op_model_cell.c 2006-11-09 18:46:47.347158248 -0600
@@ -0,0 +1,628 @@
+/*
+ * Cell Broadband Engine OProfile Support
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author: David Erb (djerb@us.ibm.com)
+ * Modifications:
+ * Carl Love <carll@us.ibm.com>
+ * Maynard Johnson <maynardj@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/firmware.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/cputable.h>
+#include <asm/rtas.h>
+#include <asm/oprofile_impl.h>
+#include <asm/reg.h>
+#include <asm/prom.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/cpufreq.h>
+#include <linux/hrtimer.h>
+#include <asm/system.h>
+
+#include "../platforms/cell/cbe_regs.h"
+#include "../platforms/cell/pmu.h"
+#include "../platforms/cell/interrupt.h"
+#include "cell/perf_utils.h"
+
+unsigned long pmc_values[NR_CPUS][NUM_CNTRS];
+struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NUM_CNTRS];
+
+/* Interpetation of hdw_thread:
+ * 0 - even virtual cpus 0, 2, 4,...
+ * 1 - odd virtual cpus 1, 3, 5, ...
+ */
+static u32 hdw_thread;
+
+static u32 vrit_cntr_inter_mask;
+static struct hrtimer timer_virt_cntr;
+
+
+/* pm_signal, need per node copy for smt safeness since multiple cpus
+ * are using this structure in the RTAS calls */
+static struct pm_signal pm_signal[NR_NODES][OP_MAX_COUNTER];
+static int pm_rtas_token;
+
+static u32 reset_value[OP_MAX_COUNTER];
+static int num_counters;
+static int oprofile_running;
+static int stop_virt_cntrs;
+
+static u32 ctr_enabled;
+
+static short int passthru[NR_NODES];
+static signed char trace_bus[4];
+static signed char input_bus[2];
+
+/*
+ * Firmware interface functions
+ */
+static int
+rtas_ibm_cbe_perftools(int subfunc, int passthru,
+ void *address, unsigned long length)
+{
+ u64 paddr = __pa(address);
+
+ return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc, passthru,
+ paddr >> 32, paddr & 0xffffffff, length);
+}
+
+static void pm_rtas_reset_signals(u32 node)
+{
+ int ret;
+
+ pm_signal[node][0].cpu = node; // fw expects physical cpu #
+ passthru[node] = PASSTHRU_DISABLE;
+
+ ret = rtas_ibm_cbe_perftools(SUBFUNC_RESET, passthru[node],
+ pm_signal[node],
+ sizeof(struct pm_signal));
+
+ if (ret)
+ printk(KERN_WARNING "%s: rtas returned: %d\n",
+ __FUNCTION__, ret);
+}
+
+static void pm_rtas_activate_signals(u32 node, u32 count)
+{
+ int ret;
+
+ if (passthru[node] == PASSTHRU_DISABLE) {
+ passthru[node] = PASSTHRU_ENABLE;
+ }
+
+ pm_signal[node][0].cpu = node; // fw expects physical cpu #
+
+ ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, passthru[node],
+ pm_signal[node],
+ count * sizeof(struct pm_signal));
+
+ if (ret)
+ printk(KERN_WARNING "%s: rtas returned: %d\n",
+ __FUNCTION__, ret);
+}
+
+/*
+ * PM Signal functions
+ */
+
+static void set_pm_event(u32 ctr, int event, u32 unit_mask)
+{
+ struct pm_signal *p;
+ u32 bus_word;
+ int node;
+ u32 bus_type;
+ u32 signal_bit;
+ struct oprofile_umask umask;
+ int j, i;
+
+
+ if (event == PPU_CYCLES_EVENT_NUM) {
+ /* Special Event: Count all cpu cycles */
+ pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES;
+
+ for_each_cbe_node(node) {
+ p = &(pm_signal[node][ctr]);
+ p->signal_group = 21;
+ p->bus_word = 0;
+ p->sub_unit = 0;
+ p->bit = 0;
+ }
+
+ return;
+ } else {
+ pm_regs.pm07_cntrl[ctr] = 0;
+ }
+
+
+ umask.val = unit_mask;
+ bus_word = umask.bus_word;
+ bus_type = umask.bus_type;
+
+ signal_bit = (event % 100);
+
+ p = &(pm_signal[0][ctr]);
+
+ p->signal_group = event / 100;
+ p->bus_word = bus_word;
+ p->sub_unit = umask.sub_unit;
+
+ for_each_cbe_node(node) {
+ pm_signal[node][ctr].signal_group
+ = pm_signal[0][ctr].signal_group;
+ pm_signal[node][ctr].bus_word = pm_signal[0][ctr].bus_word;
+ pm_signal[node][ctr].sub_unit = pm_signal[0][ctr].sub_unit;
+ }
+
+ pm_regs.pm07_cntrl[ctr] = 0;
+ pm_regs.pm07_cntrl[ctr] |=
+ PM07_CTR_COUNT_CYCLES(umask.count_cycles);
+ pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(umask.polarity);
+ pm_regs.pm07_cntrl[ctr] |=
+ PM07_CTR_INPUT_CONTROL(umask.input_control);
+
+ if (umask.input_control == 0) {
+ if (signal_bit > 31) {
+ signal_bit -= 32;
+ if (bus_word == 0x3)
+ bus_word = 0x2;
+ else if (bus_word == 0xc)
+ bus_word = 0x8;
+ }
+
+ if ((bus_type == 0) && p->signal_group >= 60)
+ bus_type = 2;
+ if ((bus_type == 1) && p->signal_group >= 50)
+ bus_type = 0;
+
+ pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_MUX(signal_bit);
+ } else {
+ pm_regs.pm07_cntrl[ctr] = 0;
+ p->bit = signal_bit;
+ }
+
+ for (i = 0; i < 4; i++) {
+ if (bus_word & (1 << i)) {
+ pm_regs.debug_bus_control |=
+ (bus_type << (31 - (2 * i) + 1));
+
+ for (j = 0; j < 2; j++) {
+ if (input_bus[j] == UNUSED_WORD) {
+ input_bus[j] = i;
+ pm_regs.group_control |=
+ (i << (31 - i));
+ break;
+ }
+ }
+ }
+ }
+}
+
+static void clear_pm_cntrl(struct pm_cntrl *pm_cntrl)
+{
+ /* clear the structure of values for setting the
+ pm_control register */
+ pm_cntrl->enable = 0;
+ pm_cntrl->stop_at_max = 0;
+ pm_cntrl->trace_mode = 0;
+ pm_cntrl->freeze = 0;
+ pm_cntrl->count_mode = 0;
+}
+
+static void write_pm_cntrl(int cpu, struct pm_cntrl pm_cntrl)
+{
+ /* Oprofile will user 32 bit counters, set bits 7:10 to 0 */
+ u32 val = 0;
+
+ if (pm_cntrl.enable == 1)
+ val |= CBE_PM_ENABLE_PERF_MON;
+
+ if (pm_cntrl.stop_at_max == 1)
+ val |= CBE_PM_STOP_AT_MAX;
+
+ if (pm_cntrl.trace_mode == 1)
+ val |= CBE_PM_TRACE_MODE_SET(pm_cntrl.trace_mode);
+
+ if (pm_cntrl.freeze == 1)
+ val |= CBE_PM_FREEZE_ALL_CTRS;
+
+ /* routine set_ount_mode must be called previously to set
+ * the count mode based on the user selection of user and kernel */
+ val |= CBE_PM_COUNT_MODE_SET(pm_cntrl.count_mode);
+ cbe_write_pm(cpu, pm_control, val);
+
+}
+
+static inline void
+set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl)
+{
+ /* The user must specify user and kernel if they want them. If
+ * neither is specified, OProfile will count in hypervisor mode */
+ if (kernel) {
+ if(user)
+ pm_cntrl->count_mode = CBE_COUNT_ALL_MODES;
+ else
+ pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE;
+ } else {
+ if(user)
+ pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE;
+ else
+ pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE;
+ }
+}
+
+static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl)
+{
+
+ pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1);
+ cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]);
+}
+
+static inline void disable_ctr(u32 cpu, u32 ctr)
+{
+ int val = 0;
+ cbe_write_pm07_control(cpu, ctr, val);
+}
+
+
+/*
+ * Oprofile setup functions
+ */
+
+static int cell_virtual_cntr(struct hrtimer *timer)
+{
+ /* This routine will alternate loading the virtual counters for
+ * virtual CPUs */
+
+ int i, cntr_offset_prev, cntr_offset_next;
+ u32 cpu;
+ u32 interrupt_mask;
+ ktime_t kt;
+ int nEnabled = 0;
+
+
+ if (stop_virt_cntrs == 1)
+ return HRTIMER_NORESTART;
+
+ /* cntr offset for the cntrs that were running */
+ cntr_offset_prev = num_counters * hdw_thread;
+
+ /* switch the cpu handling the interrupts */
+ hdw_thread = 1 ^ hdw_thread;
+
+ /* cntr offset for the cntrs to start */
+ cntr_offset_next = num_counters * hdw_thread;
+
+ /* The following is done only once per each node, but
+ * we need cpu #, not node #, to pass to the cbe_xxx functions.
+ */
+ for_each_online_cpu(cpu) {
+ if (cpu & 1)
+ continue;
+
+ /* stop counters, save counter values, restore counts
+ * for previous thread */
+ cbe_disable_pm(cpu);
+ cbe_disable_pm_interrupts(cpu);
+ interrupt_mask = cbe_clear_pm_interrupts(cpu);
+
+ for (i = 0; i < num_counters; i++) {
+ pmc_values[cpu][i + cntr_offset_prev]
+ = cbe_read_ctr(cpu, i);
+ cbe_write_ctr(cpu, i,
+ pmc_values[cpu][i+cntr_offset_next]);
+ }
+
+ /* switch to the other thread, change the interrupt
+ * and control regs to be scheduled on the CPU
+ * corresponding to the thread to execute
+ */
+ nEnabled = 0;
+
+ for (i = 0; i < num_counters; i++) {
+ if (pmc_cntrl[ hdw_thread][i+cntr_offset_next].enabled) {
+ set_pm_event(nEnabled,
+ pmc_cntrl[hdw_thread][i].enabled,
+ pmc_cntrl[hdw_thread][i].masks);
+
+ nEnabled++;
+ ctr_enabled |= (1 << i);
+ }
+ }
+
+ /* enable interrupts on the CPU thread that
+ * is starting */
+ cbe_enable_pm_interrupts(cpu, hdw_thread,
+ vrit_cntr_inter_mask);
+ cbe_enable_pm(cpu);
+
+ }
+
+ if (stop_virt_cntrs == 1) {
+ return HRTIMER_NORESTART;
+
+ } else {
+ kt = ktime_set(0, VIRT_CNTR_SW_TIME_NS);
+ hrtimer_forward(timer, timer->base->get_time(), kt);
+ return HRTIMER_RESTART;
+ }
+}
+
+
+void start_virt_cntrs(void)
+{
+ ktime_t kt;
+
+ kt = ktime_set(0, VIRT_CNTR_SW_TIME_NS);
+
+ hrtimer_init(&timer_virt_cntr, CLOCK_MONOTONIC, HRTIMER_REL);
+ timer_virt_cntr.expires = kt;
+ timer_virt_cntr.function = cell_virtual_cntr;
+ hrtimer_start(&timer_virt_cntr, kt, HRTIMER_REL);
+}
+
+
+/* This function is called once for all cpus combined */
+static void
+cell_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys, int num_ctrs)
+{
+ int node, i, j;
+ int nEnabled = 0;
+
+ stop_virt_cntrs = 0;
+ smp_mb();
+ pm_rtas_token = rtas_token("ibm,cbe-perftools");
+ if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) {
+ printk("ERROR, ibm,cbe-perftools RTAS_UNKNOWN_SERVICE\n");
+ return;
+ }
+
+
+ for_each_cbe_node(node) {
+ passthru[node] = PASSTHRU_DISABLE;
+ }
+
+ num_counters = num_ctrs;
+
+ pm_regs.group_control = 0;
+ pm_regs.debug_bus_control = 0;
+
+ /* setup the pm_control register */
+ clear_pm_cntrl(&pm_regs.pm_cntrl);
+ pm_regs.pm_cntrl.stop_at_max = 1;
+ pm_regs.pm_cntrl.trace_mode = 0;
+ pm_regs.pm_cntrl.freeze = 1;
+
+ set_count_mode(sys->enable_kernel, sys->enable_user,
+ &pm_regs.pm_cntrl);
+
+ /* Setup the thread 0 events */
+ for (i = 0; i < num_ctrs; ++i) {
+
+ pmc_cntrl[0][i].evnts = ctr[i].event;
+ pmc_cntrl[0][i].masks = ctr[i].unit_mask;
+ pmc_cntrl[0][i].enabled = ctr[i].enabled;
+ pmc_cntrl[0][i].vcntr = i;
+
+ for (j = 0; j < NR_CPUS; j++) {
+ pmc_values[j][i] = 0;
+ }
+ }
+
+ /* Setup the thread 1 events, map the thread 0 event to the
+ * equivalent thread 1 event
+ */
+ for (i = 0; i < num_ctrs; ++i) {
+
+ if ((ctr[i].event >= 2100) && (ctr[i].event <= 2111))
+ pmc_cntrl[1][i].evnts = ctr[i].event + 19;
+ else if (ctr[i].event == 2203)
+ pmc_cntrl[1][i].evnts = ctr[i].event;
+ else if ((ctr[i].event >= 2200) && (ctr[i].event <= 2215))
+ pmc_cntrl[1][i].evnts = ctr[i].event + 16;
+ else
+ pmc_cntrl[1][i].evnts = ctr[i].event;
+
+ pmc_cntrl[1][i].masks = ctr[i].unit_mask;
+ pmc_cntrl[1][i].enabled = ctr[i].enabled;
+ pmc_cntrl[1][i].vcntr = i;
+ }
+
+ for (i = 0; i < 4; i++)
+ trace_bus[i] = UNUSED_WORD;
+
+ for (i = 0; i < 2; i++)
+ input_bus[i] = UNUSED_WORD;
+
+ /* Our counters count up, and "count" refers to
+ * how much before the next interrupt, and we interrupt
+ * on overflow. So we calculate the starting value
+ * which will give us "count" until overflow.
+ * Then we set the events on the enabled counters.
+ */
+
+ for (i = 0; i < num_counters; ++i) {
+ /* start with virtual counter set 0 */
+
+ if (pmc_cntrl[0][i].enabled) {
+ // using 32bit counters, reset max - count
+ reset_value[i] = 0xFFFFFFFF - ctr[i].count;
+ set_pm_event(nEnabled,
+ pmc_cntrl[0][i].evnts,
+ pmc_cntrl[0][i].masks);
+ nEnabled++;
+ ctr_enabled |= (1 << i);
+ }
+ }
+
+ start_virt_cntrs();
+
+}
+
+/* This function is called once for each cpu */
+static void cell_cpu_setup(void *unused)
+{
+ u32 cpu = smp_processor_id();
+ u32 nEnabled = 0;
+ u32 interrupt_mask;
+ int i;
+
+ /* There is one performance monitor for cpu 0/1 and one for cpu 2/3,
+ * so we only need to perform this function once per node.
+ */
+ if (is_smt() && (cpu & 1))
+ return;
+
+ if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) {
+ printk("ERROR, RTAS_UNKNOWN_SERVICE\n");
+ return;
+ }
+
+ /* Stop all counters */
+ cbe_disable_pm(cpu);
+ cbe_disable_pm_interrupts(cpu);
+
+ cbe_write_pm(cpu, pm_interval, 0);
+ cbe_write_pm(cpu, pm_start_stop, 0);
+ cbe_write_pm(cpu, group_control, pm_regs.group_control);
+ cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control);
+ write_pm_cntrl(cpu, pm_regs.pm_cntrl);
+
+ interrupt_mask = 0;
+
+ for (i = 0; i < num_counters; ++i) {
+ if (ctr_enabled & (1 << i)) {
+ pm_signal[cpu / 2][nEnabled].cpu = cpu / 2;
+ nEnabled++;
+ interrupt_mask |= CBE_PM_CTR_OVERFLOW_INTR(i);
+ }
+ }
+
+ pm_rtas_activate_signals(cbe_cpu_to_node(cpu), nEnabled);
+}
+
+
+static void cell_start(struct op_counter_config *ctr)
+{
+ u32 cpu = smp_processor_id();
+ u32 interrupt_mask;
+ u32 i;
+
+ /* There is one performance monitor per node, so we
+ * only need to perform this function once per node.
+ */
+ if (is_smt() && (cpu & 1))
+ return;
+
+ interrupt_mask = 0;
+
+ for (i = 0; i < num_counters; ++i) {
+ if (ctr_enabled & (1 << i)) {
+ cbe_write_ctr(cpu, i, reset_value[i]);
+ enable_ctr(cpu, i, pm_regs.pm07_cntrl);
+ interrupt_mask |= CBE_PM_CTR_OVERFLOW_INTR(i);
+ } else {
+ disable_ctr(cpu, i);
+ }
+ }
+
+ cbe_clear_pm_interrupts(cpu);
+ vrit_cntr_inter_mask = interrupt_mask;
+
+ cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
+
+
+ cbe_enable_pm(cpu);
+
+ oprofile_running = 1;
+ smp_mb();
+}
+
+/*
+ * PM virtual counter functions
+ */
+
+static void cell_stop(void)
+{
+ u32 cpu = smp_processor_id();
+
+ /* There is one performance monitor per node, so we
+ * only need to perform this function once per node.
+ */
+ if (is_smt() && (cpu & 1)) {
+ return;
+ }
+ hrtimer_cancel(&timer_virt_cntr);
+ stop_virt_cntrs = 1;
+ smp_mb();
+
+ /* Stop the counters */
+ cbe_disable_pm(cpu);
+
+ /* Deactivate the signals */
+ pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
+
+ /* Deactivate interrupts */
+ cbe_disable_pm_interrupts(cpu);
+
+ oprofile_running = 0;
+ smp_mb();
+}
+
+static void
+cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr)
+{
+ u32 cpu;
+ u64 pc;
+ int is_kernel;
+ u32 interrupt_mask;
+ int i;
+
+ cpu = smp_processor_id();
+ cbe_disable_pm(cpu);
+
+ interrupt_mask = cbe_clear_pm_interrupts(cpu);
+
+ if (oprofile_running == 1) {
+ pc = regs->nip;
+ is_kernel = is_kernel_addr(pc);
+
+ for (i = 0; i < num_counters; ++i) {
+ if (interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i)) {
+ if (ctr[i].enabled) {
+ oprofile_add_pc(pc, is_kernel, i);
+ cbe_write_ctr(cpu, i, reset_value[i]);
+ }
+ }
+ }
+ }
+
+ /* The counters were frozen by the interrupt.
+ * Reenable the interrupt and restart the counters.
+ */
+ cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
+ cbe_enable_pm(cpu);
+}
+
+struct op_powerpc_model op_model_cell = {
+ .reg_setup = cell_reg_setup,
+ .cpu_setup = cell_cpu_setup,
+ .start = cell_start,
+ .stop = cell_stop,
+ .handle_interrupt = cell_handle_interrupt,
+};
Index: linux-2.6.18/include/asm-powerpc/cputable.h
===================================================================
--- linux-2.6.18.orig/include/asm-powerpc/cputable.h 2006-11-06 14:54:53.671068648 -0600
+++ linux-2.6.18/include/asm-powerpc/cputable.h 2006-11-09 08:49:41.109157544 -0600
@@ -45,6 +45,7 @@
PPC_OPROFILE_POWER4 = 2,
PPC_OPROFILE_G4 = 3,
PPC_OPROFILE_BOOKE = 4,
+ PPC_OPROFILE_CELL = 5,
};

struct cpu_spec {
Index: linux-2.6.18/include/asm-powerpc/oprofile_impl.h
===================================================================
--- linux-2.6.18.orig/include/asm-powerpc/oprofile_impl.h 2006-09-19 22:42:06.000000000 -0500
+++ linux-2.6.18/include/asm-powerpc/oprofile_impl.h 2006-11-09 18:48:46.531144568 -0600
@@ -54,6 +54,7 @@
extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
extern struct op_powerpc_model op_model_7450;
+extern struct op_powerpc_model op_model_cell;

#ifndef CONFIG_FSL_BOOKE

Index: linux-2.6.18/arch/powerpc/configs/cell_defconfig
===================================================================
--- linux-2.6.18.orig/arch/powerpc/configs/cell_defconfig 2006-11-06 14:54:56.464044264 -0600
+++ linux-2.6.18/arch/powerpc/configs/cell_defconfig 2006-11-09 12:39:30.844173528 -0600
@@ -1102,7 +1102,8 @@
#
# Instrumentation Support
#
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set

#
\
 
 \ /
  Last update: 2006-11-10 17:51    [W:0.112 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site