Messages in this thread | | | Date | Sun, 04 Sep 2005 01:24:18 +1200 | From | Reuben Farrelly <> | Subject | Re: 2.6.13-mm1: hangs during boot ... |
| |
Hi Peter,
On 3/09/2005 4:59 a.m., Peter Williams wrote: > Brown, Len wrote: >>>> [ 279.662960] [<c02d5c74>] wait_for_completion+0xa4/0x110 >> >> >> possibly a missing interrupt? >> >> >>> CONFIG_ACPI=y >> >> >> any difference if booted with "acpi=off" or "acpi=noirq"? > > Yes. In both cases, the system appears to boot normally but I'm unable > to login or connect via ssh. Also there's a "device not ready" message
Are you seeing this "Device not ready" message appear over and over, or just the once?
I am seeing it fill up my messages log as it is logging 1 or so messages each minute. I've emailed the SCSI maintainer James Bottomley twice about it but had no response either time.
The SCSI device I have is:
Sep 3 22:14:40 tornado kernel: Vendor: SONY Model: CD-RW CRX145S Rev: 1.0b
As for the inability to log in, this bug may be relevant, given I also had that problem:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=166422
There are fixes in the pipeline for util-linux audit interaction in Fedora as well. I know because I reported those too ;)
> after the scsi initialization which I don't normally see. I've attached > the scsi initialization output. The PF_NETLINK error messages after the > login prompt in this output are created whenever I try to log in or > connect via ssh.
The workaround by enabling audit support, but obviously a better fix is in the pipeline..
I'm surprised more people aren't discovering these 'interactions' due to having audit not turned on. Does everyone build audit into their kernels?
reuben
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |