lkml.org 
[lkml]   [2005]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: updating kernel to 2.6.13-rc1 from 2.6.12 + CONFIG_DEVFS_FS + empty /dev
Willy Tarreau wrote:
> Hi Eric,

Hi willy,

>
> On Sat, Jul 02, 2005 at 09:22:20AM +0200, Eric Valette wrote:
>
>>Greg KH wrote:
>>
>>
>>>Why? Why not put it in ROM with your kernel image, look at how the
>>>kernel build process does it with the "built-in" initramfs.
>>
>>Well, nowadays, most system have only flash because ROM does not enable
>>to do firmware upgrade. Second, putting it in the kernel or as a
>>separate flash section or in an initrd does not change the problem :
>>something has to be stored on non volatile memory whereas you do not
>>need that for devfs (except devfs code itself of course) but then you
>>have udev instead of devfs...
>
>
> Well, although I've never used udev because I've been using sort of an
> equivalent called "preinit" for 4 years now, I don't totally agree with
> you about the firmware upgrade : when you package your systems to allow
> the customer to perform "firmware" upgrades, your image is already very
> specific to a hardware model, and I don't see why you would need to
> create /dev entries independantly from the kernel or rootfs.

I beg to disagree. More and more devices have generic connectivity plug
(USB, 1394, ...) and you may update your firmware because you support a
new device connected to this plug that is not a generic device (specific
driver needed) but you may also have provisionned generic devices
drivers for the plug and want devices created only when device is
plugged (usb mass storage comes in mind). If I make a static /dev
provision for a USB disk how many useless partition will I need to
create, and how will I mount the correct number of partition without
hotplug like feature and analysing by hand the partition table?


>>BTW : valette@tri-yann->df /dev
>>Filesystem 1K-blocks Used Available Use% Mounted on
>>tmpfs 10240 2876 7364 29% /dev
>>
>>
>>2 MB RAM on my PC??? I must be missing something.
>
>
> I think something went wrong, perhaps something like
>
> # some_prog >/dev/null
>
> while null did not exist. My /dev is a tmpfs too, but mounted with size=0,
> so that I can only create inodes into it, but cannot write any data. One
> other advantage of using size=0 is that "df" does not show it by default.

Not sure. It is a debian sid install.

Thanks anyone who responded. I'll be unable to read mails for a while.


-- eric
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-02 11:13    [W:0.066 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site