lkml.org 
[lkml]   [2005]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2:3/3]Export cpu topology by sysfs
On Mon, Dec 26, 2005 at 03:38:16PM +0800, Zhang, Yanmin wrote:
> >>-----Original Message-----
> >>From: Greg KH [mailto:greg@kroah.com]
> >>Sent: 2005Äê12ÔÂ24ÈÕ 3:16
> >>To: Zhang, Yanmin
> >>Cc: Yanmin Zhang; linux-kernel@vger.kernel.org; discuss@x86-64.org; linux-ia64@vger.kernel.org; Siddha, Suresh B; Shah, Rajesh;
> >>Pallipadi, Venkatesh
> >>Subject: Re: [PATCH v2:3/3]Export cpu topology by sysfs
> >>
> >>On Fri, Dec 23, 2005 at 12:03:27PM +0800, Zhang, Yanmin wrote:
> >>> >>Can't you just use an attribute group and attach it to the cpu kobject?
> >>> >>That would save an array of kobjects I think.
> >>> As you know, current i386/x86_64 arch also export cache info under
> >>> /sys/device/system/cpu/cpuX/cache. Is it clearer to export topology
> >>> under a new directory than under cpu directly?
> >>
> >>No, the place in the sysfs tree you are putting this is just fine. I'm
> >>just saying that you do not need to create a new kobject for these
> >>attributes. Just use an attribute group, and you will get the same
> >>naming, without the need for an extra kobject (and the whole array of
> >>kobjects) at all.
> >>
> >>Does that make more sense?
> Yes, indeed. Now, I used your idea and the patch became simpler. Thanks.
>
>
> >>
> >>> >>> +static int __cpuinit topology_cpu_callback(struct notifier_block *nfb,
> >>> >>> + unsigned long action, void *hcpu)
> >>> >>> +{
> >>> >>> + unsigned int cpu = (unsigned long)hcpu;
> >>> >>> + struct sys_device *sys_dev;
> >>> >>> +
> >>> >>> + sys_dev = get_cpu_sysdev(cpu);
> >>> >>> + switch (action) {
> >>> >>> + case CPU_ONLINE:
> >>> >>> + topology_add_dev(sys_dev);
> >>> >>> + break;
> >>> >>> +#ifdef CONFIG_HOTPLUG_CPU
> >>> >>> + case CPU_DEAD:
> >>> >>> + topology_remove_dev(sys_dev);
> >>> >>> + break;
> >>> >>> +#endif
> >>> >>
> >>> >>Why ifdef? Isn't it safe to just always have this in?
> >>> If no ifdef here, gcc reported a compiling warning when I compiled it
> >>> on IA64 with CONFIG_HOTPLUG_CPU=n.
> >>
> >>Then you should probably go change it so that CPU_DEAD is defined on
> >>non-smp builds, otherwise the code gets quite messy like the above :)
>
> Sorry. My previous explanation is confusing. It's a link warning on ia64. On ia64, the kernel vmlinux doesn't include section .exit.text, so ld will report a link warning when a function is in section .exit.text and another function (not in .exit.text) calls the first one. When CONFIG_HOTPLUG_CPU=n, function topology_remove_dev is in section .exit.text, but its caller topology_remove_dev is not in .exit.text.
>
> i386 and x86_64 kernel vmlinux does include .exit.text and discard it only when running, so there is no such warning on i386/x86_64.
>
> There is no other better approach to get rid of the warning unless we change arch/ia64/kernel/vmlinux.lds.S to keep all .exit.text in kernel image.

Here is the new patch. Thank Greg.

---

diff -Nraup linux-2.6.15_rc3/arch/ia64/kernel/topology.c linux-2.6.15_rc3_topology/arch/ia64/kernel/topology.c
--- linux-2.6.15_rc3/arch/ia64/kernel/topology.c 2001-06-06 08:57:20.000000000 +0800
+++ linux-2.6.15_rc3_topology/arch/ia64/kernel/topology.c 2001-06-06 08:55:35.000000000 +0800
@@ -98,4 +98,4 @@ out:
return err;
}

-__initcall(topology_init);
+subsys_initcall(topology_init);
diff -Nraup linux-2.6.15_rc3/Documentation/cputopology.txt linux-2.6.15_rc3_topology/Documentation/cputopology.txt
--- linux-2.6.15_rc3/Documentation/cputopology.txt 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.15_rc3_topology/Documentation/cputopology.txt 2001-06-06 08:55:35.000000000 +0800
@@ -0,0 +1,31 @@
+
+Export cpu topology info by sysfs. Items (attributes) are similar
+to /proc/cpuinfo.
+
+1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
+represent the physical package id of cpu X;
+2) /sys/devices/system/cpu/cpuX/topology/core_id:
+represent the cpu core id to cpu X;
+3) /sys/devices/system/cpu/cpuX/topology/thread_id:
+represent the cpu thread id to cpu X;
+4) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
+represent the thread siblings to cpu X in the same core;
+5) /sys/devices/system/cpu/cpuX/topology/core_siblings:
+represent the thread siblings to cpu X in the same physical package;
+
+To implement it in an architecture-neutral way, a new source file,
+driver/base/topology.c, is to export the 5 attributes.
+
+If one architecture wants to support this feature, it just needs to
+implement 5 defines, typically in file include/asm-XXX/topology.h.
+The 5 defines are:
+#define topology_physical_package_id(cpu)
+#define topology_core_id(cpu)
+#define topology_thread_id(cpu)
+#define topology_thread_siblings(cpu)
+#define topology_core_siblings(cpu)
+
+The type of siblings is cpumask_t.
+
+If an attribute isn't defined on an architecture, it won't be exported.
+
diff -Nraup linux-2.6.15_rc3/drivers/base/Makefile linux-2.6.15_rc3_topology/drivers/base/Makefile
--- linux-2.6.15_rc3/drivers/base/Makefile 2001-06-06 08:57:20.000000000 +0800
+++ linux-2.6.15_rc3_topology/drivers/base/Makefile 2001-06-06 08:55:35.000000000 +0800
@@ -8,6 +8,7 @@ obj-y += power/
obj-$(CONFIG_FW_LOADER) += firmware_class.o
obj-$(CONFIG_NUMA) += node.o
obj-$(CONFIG_MEMORY_HOTPLUG) += memory.o
+obj-$(CONFIG_SMP) += topology.o

ifeq ($(CONFIG_DEBUG_DRIVER),y)
EXTRA_CFLAGS += -DDEBUG
diff -Nraup linux-2.6.15_rc3/drivers/base/topology.c linux-2.6.15_rc3_topology/drivers/base/topology.c
--- linux-2.6.15_rc3/drivers/base/topology.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.15_rc3_topology/drivers/base/topology.c 2001-06-06 09:01:30.000000000 +0800
@@ -0,0 +1,159 @@
+/*
+ * driver/base/topology.c - Populate sysfs with cpu topology information
+ *
+ * Written by: Zhang Yanmin, Intel Corporation
+ *
+ * Copyright (C) 2005, Intel Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+
+#define define_one_ro(_name) \
+static SYSDEV_ATTR(_name, 0444, show_##_name, NULL)
+
+#define define_id_show_func(name) \
+static ssize_t show_##name(struct sys_device *dev, char *buf) \
+{ \
+ unsigned int cpu = dev->id; \
+ return sprintf(buf, "%d\n", topology_##name(cpu)); \
+}
+
+#define define_siblings_show_func(name) \
+static ssize_t show_##name(struct sys_device *dev, char *buf) \
+{ \
+ ssize_t len = -1; \
+ unsigned int cpu = dev->id; \
+ len = cpumask_scnprintf(buf, NR_CPUS+1, topology_##name(cpu)); \
+ return (len + sprintf(buf + len, "\n")); \
+}
+
+#ifdef topology_physical_package_id
+define_id_show_func(physical_package_id);
+define_one_ro(physical_package_id);
+#define ref_physical_package_id_attr &attr_physical_package_id.attr,
+#else
+#define ref_physical_package_id_attr
+#endif
+
+#ifdef topology_core_id
+define_id_show_func(core_id);
+define_one_ro(core_id);
+#define ref_core_id_attr &attr_core_id.attr,
+#else
+#define ref_core_id_attr
+#endif
+
+#ifdef topology_thread_id
+define_id_show_func(thread_id);
+define_one_ro(thread_id);
+#define ref_thread_id_attr &attr_thread_id.attr,
+#else
+#define ref_thread_id_attr
+#endif
+
+#ifdef topology_thread_siblings
+define_siblings_show_func(thread_siblings);
+define_one_ro(thread_siblings);
+#define ref_thread_siblings_attr &attr_thread_siblings.attr,
+#else
+#define ref_thread_siblings_attr
+#endif
+
+#ifdef topology_core_siblings
+define_siblings_show_func(core_siblings);
+define_one_ro(core_siblings);
+#define ref_core_siblings_attr &attr_core_siblings.attr,
+#else
+#define ref_core_siblings_attr
+#endif
+
+static struct attribute * default_attrs[] = {
+ ref_physical_package_id_attr
+ ref_core_id_attr
+ ref_thread_id_attr
+ ref_thread_siblings_attr
+ ref_core_siblings_attr
+ NULL
+};
+
+static struct attribute_group topology_attr_group = {
+ .attrs = default_attrs,
+ .name = "topology"
+};
+
+/* Add/Remove cpu_topology interface for CPU device */
+static int __cpuinit topology_add_dev(struct sys_device * sys_dev)
+{
+ sysfs_create_group(&sys_dev->kobj, &topology_attr_group);
+ return 0;
+}
+
+static int __cpuexit topology_remove_dev(struct sys_device * sys_dev)
+{
+ sysfs_remove_group(&sys_dev->kobj, &topology_attr_group);
+ return 0;
+}
+
+static int __cpuinit topology_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ topology_add_dev(sys_dev);
+ break;
+#ifdef CONFIG_HOTPLUG_CPU
+ case CPU_DEAD:
+ topology_remove_dev(sys_dev);
+ break;
+#endif
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block topology_cpu_notifier =
+{
+ .notifier_call = topology_cpu_callback,
+};
+
+static int __cpuinit topology_sysfs_init(void)
+{
+ int i;
+
+ for_each_online_cpu(i) {
+ topology_cpu_callback(&topology_cpu_notifier, CPU_ONLINE,
+ (void *)(long)i);
+ }
+
+ register_cpu_notifier(&topology_cpu_notifier);
+
+ return 0;
+}
+
+device_initcall(topology_sysfs_init);
+
diff -Nraup linux-2.6.15_rc3/include/asm-i386/topology.h linux-2.6.15_rc3_topology/include/asm-i386/topology.h
--- linux-2.6.15_rc3/include/asm-i386/topology.h 2001-06-06 08:57:20.000000000 +0800
+++ linux-2.6.15_rc3_topology/include/asm-i386/topology.h 2001-06-06 08:55:35.000000000 +0800
@@ -27,6 +27,14 @@
#ifndef _ASM_I386_TOPOLOGY_H
#define _ASM_I386_TOPOLOGY_H

+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu) phys_proc_id[cpu]
+#define topology_core_id(cpu) cpu_core_id[cpu]
+#define topology_thread_id(cpu) cpu_thread_id[cpu]
+#define topology_core_siblings(cpu) cpu_core_map[cpu]
+#define topology_thread_siblings(cpu) cpu_sibling_map[cpu]
+#endif
+
#ifdef CONFIG_NUMA

#include <asm/mpspec.h>
diff -Nraup linux-2.6.15_rc3/include/asm-ia64/topology.h linux-2.6.15_rc3_topology/include/asm-ia64/topology.h
--- linux-2.6.15_rc3/include/asm-ia64/topology.h 2001-06-06 08:57:20.000000000 +0800
+++ linux-2.6.15_rc3_topology/include/asm-ia64/topology.h 2001-06-06 08:55:35.000000000 +0800
@@ -100,6 +100,14 @@ void build_cpu_to_node_map(void);

#endif /* CONFIG_NUMA */

+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu) cpu_data(cpu)->socket_id
+#define topology_core_id(cpu) cpu_data(cpu)->core_id
+#define topology_thread_id(cpu) cpu_data(cpu)->thread_id
+#define topology_core_siblings(cpu) cpu_core_map[cpu]
+#define topology_thread_siblings(cpu) cpu_sibling_map[cpu]
+#endif
+
#include <asm-generic/topology.h>

#endif /* _ASM_IA64_TOPOLOGY_H */
diff -Nraup linux-2.6.15_rc3/include/asm-x86_64/topology.h linux-2.6.15_rc3_topology/include/asm-x86_64/topology.h
--- linux-2.6.15_rc3/include/asm-x86_64/topology.h 2001-06-06 08:57:20.000000000 +0800
+++ linux-2.6.15_rc3_topology/include/asm-x86_64/topology.h 2001-06-06 08:55:35.000000000 +0800
@@ -58,6 +58,14 @@ extern int __node_distance(int, int);

#endif

+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu) phys_proc_id[cpu]
+#define topology_core_id(cpu) cpu_core_id[cpu]
+#define topology_thread_id(cpu) cpu_thread_id[cpu]
+#define topology_core_siblings(cpu) cpu_core_map[cpu]
+#define topology_thread_siblings(cpu) cpu_sibling_map[cpu]
+#endif
+
#include <asm-generic/topology.h>

#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-12-26 09:31    [W:0.070 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site