lkml.org 
[lkml]   [2005]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Bluesmoke is now EDAC
Date
I believe this sub-system was deliberately renamed from Bluesmoke to EDAC. In
that case, we should probably get rid of the remaining Bluesmoke references
and change them into EDAC.

This patch changes Bluesmoke into EDAC in Kconfig and Makefile and I also took
the liberty of rewriting some of the help text slightly.


Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
---

drivers/edac/Kconfig | 19 +++++++++----------
drivers/edac/Makefile | 2 +-
2 files changed, 10 insertions(+), 11 deletions(-)

--- linux-2.6.14-rc4-mm1-orig/drivers/edac/Kconfig 2005-10-17 15:08:56.000000000 +0200
+++ linux-2.6.14-rc4-mm1/drivers/edac/Kconfig 2005-10-17 15:08:16.000000000 +0200
@@ -15,8 +15,8 @@
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
supporting chipset: memory errors, cache errors, PCI errors,
- thermal throttling, etc.. If unsure, select 'Y'.
-
+ thermal throttling, etc.
+ If unsure, select 'Y'.

comment "Reporting subsystems"
depends on EDAC
@@ -26,8 +26,8 @@
depends on EDAC
help
This turns on debugging information for the entire EDAC
- sub-system. You can insert module with "debug_level=x", current
- there're four debug levels (x=0,1,2,3 from low to high).
+ sub-system. You can insert module with "debug_level=x", currently
+ there are four debug levels (x=0,1,2,3 from low to high).
Usually you should select 'N'.

config EDAC_MM_EDAC
@@ -35,12 +35,11 @@
depends on EDAC
help
Some systems are able to detect and correct errors in main
- memory. Bluesmoke can report statistics on memory error
- detection and correction (EDAC - or commonly referred to ECC
- errors). Bluesmoke will also try to decode where these errors
- occurred so that a particular failing memory module can be
- replaced. If unsure, select 'Y'.
-
+ memory. EDAC can report statistics on memory error detection
+ and correction (commonly referred to ECC errors).
+ EDAC will also try to decode where these errors occurred so
+ that a particular failing memory module can be replaced.
+ If unsure, select 'Y'.

config EDAC_AMD76X
tristate "AMD 76x (760, 762, 768)"
--- linux-2.6.14-rc4-mm1-orig/drivers/edac/Makefile 2005-10-17 12:00:36.000000000 +0200
+++ linux-2.6.14-rc4-mm1/drivers/edac/Makefile 2005-10-17 15:03:49.000000000 +0200
@@ -1,5 +1,5 @@
#
-# Makefile for the Linux kernel bluesmoke drivers.
+# Makefile for the Linux kernel EDAC drivers.
#
# Copyright 02 Jul 2003, Linux Networx (http://lnxi.com)
# This file may be distributed under the terms of the


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-10-17 15:15    [W:0.047 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site