lkml.org 
[lkml]   [2005]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 5/8] Kconfig: cleanup various driver menus

This properly indents various driver menus.
Remove PARPORT_PC_CML1.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>

---

mtd/Kconfig | 18 +++++++++---------
parport/Kconfig | 12 +++---------
video/Kconfig | 29 ++++++++++++++---------------
3 files changed, 26 insertions(+), 33 deletions(-)

Index: linux-2.6.11/drivers/parport/Kconfig
===================================================================
--- linux-2.6.11.orig/drivers/parport/Kconfig 2005-01-29 22:50:43.242974099 +0100
+++ linux-2.6.11/drivers/parport/Kconfig 2005-01-29 22:55:31.785275067 +0100
@@ -46,15 +46,9 @@ config PARPORT_PC

If unsure, say Y.

-config PARPORT_PC_CML1
- tristate
- depends on PARPORT!=n && PARPORT_PC!=n
- default PARPORT_PC if SERIAL_8250=y
- default m if SERIAL_8250=m
-
config PARPORT_SERIAL
tristate "Multi-IO cards (parallel and serial)"
- depends on SERIAL_8250!=n && PARPORT_PC_CML1 && PCI
+ depends on SERIAL_8250 && PARPORT_PC && PCI
help
This adds support for multi-IO PCI cards that have parallel and
serial ports. You should say Y or M here. If you say M, the module
@@ -118,8 +112,8 @@ config PARPORT_ATARI

config PARPORT_GSC
tristate
- depends on GSC
- default PARPORT
+ default GSC
+ depends on PARPORT

config PARPORT_SUNBPP
tristate "Sparc hardware (EXPERIMENTAL)"
Index: linux-2.6.11/drivers/mtd/Kconfig
===================================================================
--- linux-2.6.11.orig/drivers/mtd/Kconfig 2005-01-29 22:50:43.242974099 +0100
+++ linux-2.6.11/drivers/mtd/Kconfig 2005-01-29 22:55:31.786274895 +0100
@@ -27,6 +27,15 @@ config MTD_DEBUG_VERBOSE
help
Determines the verbosity level of the MTD debugging messages.

+config MTD_CONCAT
+ tristate "MTD concatenating support"
+ depends on MTD
+ help
+ Support for concatenating several MTD devices into a single
+ (virtual) one. This allows you to have -for example- a JFFS(2)
+ file system spanning multiple physical flash chips. If unsure,
+ say 'Y'.
+
config MTD_PARTITIONS
bool "MTD partitioning support"
depends on MTD
@@ -40,15 +49,6 @@ config MTD_PARTITIONS
devices. Partitioning on NFTL 'devices' is a different - that's the
'normal' form of partitioning used on a block device.

-config MTD_CONCAT
- tristate "MTD concatenating support"
- depends on MTD
- help
- Support for concatenating several MTD devices into a single
- (virtual) one. This allows you to have -for example- a JFFS(2)
- file system spanning multiple physical flash chips. If unsure,
- say 'Y'.
-
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
Index: linux-2.6.11/drivers/video/Kconfig
===================================================================
--- linux-2.6.11.orig/drivers/video/Kconfig 2005-01-29 22:50:43.242974099 +0100
+++ linux-2.6.11/drivers/video/Kconfig 2005-01-29 22:55:31.787274723 +0100
@@ -1062,7 +1062,7 @@ config FB_G364

config FB_68328
bool "Motorola 68328 native frame buffer support"
- depends on (M68328 || M68EZ328 || M68VZ328)
+ depends on FB && (M68328 || M68EZ328 || M68VZ328)
help
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
@@ -1081,22 +1081,8 @@ config FB_PXA

If unsure, say N.

-config FB_W100
- tristate "W100 frame buffer support"
- depends on FB && PXA_SHARPSL
- ---help---
- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called vfb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
-
- If unsure, say N.
-
config FB_PXA_PARAMETERS
bool "PXA LCD command line parameters"
- default n
depends on FB_PXA
---help---
Enable the use of kernel command line or module parameters
@@ -1111,6 +1097,19 @@ config FB_PXA_PARAMETERS

<file:Documentation/fb/pxafb.txt> describes the available parameters.

+config FB_W100
+ tristate "W100 frame buffer support"
+ depends on FB && PXA_SHARPSL
+ ---help---
+ Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called vfb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.084 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site