lkml.org 
[lkml]   [2004]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectr8169 in 2.6.7: transfer stops after few seconds
Hello!

My realtek-8169 based NIC doesn't work with 2.6.
Kernel versions tried: 2.6.7, 2.6.7-mm7.
Works OK with 2.4.26.

Symptoms: after few dozen packets, transfer stops,
both with TCP and with flood ping.
I can revive NIC by doing ifdown and ifup again.

The card is NetInfo NA-G32:

0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at efffbf00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at effd0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Vital Product Data

I'm trying to use this NIC with AMD750-based motherboard (Gigabyte 7IXE4).

Is there any other info I can supply you with to debug this problem?

~
:wq
With best regards,
Vladimir Savkin.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:04    [W:0.026 / U:1.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site