Messages in this thread | | | From | "Mario 'BitKoenig' Holbe" <> | Subject | framebuffer + fbtv + X kills system | Date | Thu, 1 Jul 2004 17:29:03 +0200 |
| |
Hello,
I experience unconditional system crashes in the following situation:
I'm using kernel 2.4.26 with tdfx framebuffer as console driver (3Dfx Voodoo 3 3000 AGP): `video=tdfx:1280x1024-16@85' I'm further running a XFree86 X-Server (with `Driver "tdfx"', `Option "UseFBDev" "true"', `DefaultDepth 24' and `Modes "1280x1024" ...'.
I'm using fbtv -s 300x300 -k -q (fbtv is part of xawtv) to map a TV picture from a BT878 card (Hauppauge WinTV PCI) in the upper right corner of the monitor. The -k option means that fbtv keeps capture on when switching consoles.
This works very well, as long as I don't switch to the X console (switching to other consoles works well, even if they have another video mode - the picture is crappy then, but the system remains stable). If I switch to X, the system gets horribly slow. X gets nothing really drawed anymore. Sometimes I succeed in switching back to a non-X console, sometimes the machine is just rebooting after a while. When switching back out-of-X works, the framebuffer seems to be broken: switching to other modes that worked before (via fbset, no matter on what console), doesn't work anymore - most times, monitor reports `signal out of range'.
Is this reproducible for someone else too perhaps?
I know, there are a lot of components involved. However, since I route all graphics access through framebuffer and since framebuffer is the only component which shows errors, I think, framebuffer is the problem here: it's interface just should not allow any application to crash the system or bring it in a state, where it doesn't work anymore as it did before.
Here are a few system details about the comfiguration I'm running: Kernel command line: auto BOOT_IMAGE=Linux ro root=303 console=ttyS0,38400n8 console=tty0 video=tdfx:1280x1024-16@85 nmi_watchdog=1 panic=60 parport=0x378,7,3 ACPI: Using PIC for interrupt routing fb: Voodoo3 memory = 16384K fb: MTRR's turned on tdfxfb: reserving 1024 bytes for the hwcursor at f9815000 Console: switching to colour frame buffer device 160x64 fb0: 3Dfx Voodoo3 frame buffer device PCI: Enabling device 00:0a.1 (0004 -> 0006) btaudio: Bt878 (rev 17) at 00:0a.1, irq: 10, latency: 32, mmio: 0xf2800000 btaudio: using card config "default" btaudio: registered device dsp2 [digital] btaudio: registered device dsp3 [analog] btaudio: registered device mixer1 Linux video capture interface: v1.00 bttv: driver version 0.7.108 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Bt8xx card found (0). PCI: Enabling device 00:0a.0 (0004 -> 0006) bttv0: Bt878 (rev 17) at 00:0a.0, irq: 10, latency: 32, mmio: 0xf3000000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] i2c-dev.o: Registered 'bt848 #0' as minor 1 bttv0: Hauppauge eeprom: model=44354, tuner=Philips FM1216 (5), radio=yes bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found msp34xx: init: chip=MSP3415D-B3 +nicam +simple msp3410: daemon started bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z tuner: chip found @ 0xc2 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 lirc_dev: IR Remote Control driver registered, at major 61 lirc_i2c: chip found @ 0x18 (Hauppauge IR) tuner: type already set (5)
Kernel is compiled with: CONFIG_AGP=y CONFIG_AGP_VIA=y CONFIG_DRM=y CONFIG_DRM_NEW=y CONFIG_DRM_TDFX=m CONFIG_VIDEO_DEV=m CONFIG_VIDEO_PROC_FS=y CONFIG_VIDEO_BT848=m CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y CONFIG_VIDEO_SELECT=y CONFIG_FB_3DFX=y CONFIG_FBCON_ADVANCED=y CONFIG_FBCON_MFB=y CONFIG_FBCON_CFB2=y CONFIG_FBCON_CFB4=y CONFIG_FBCON_CFB8=y CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB24=y CONFIG_FBCON_CFB32=y CONFIG_FBCON_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_FONT_SUN8x16=y ONFIG_SOUND_BT878=m CONFIG_SOUND_ES1370=m
regards, Mario -- I've never been certain whether the moral of the Icarus story should only be, as is generally accepted, "Don't try to fly too high," or whether it might also be thought of as, "Forget the wax and feathers and do a better job on the wings." -- Stanley Kubrick
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |