Messages in this thread | | | From | Mike <> | Subject | HDIO_SET_DMA failed: with nforce2 board | Date | Sun, 16 May 2004 22:15:02 -0400 |
| |
I have an nforce2 based board and I cannot enable dma.
# hdparm -i /dev/hda
/dev/hda:
Model=Maxtor 6Y120L0, FwRev=YAR41BW0, SerialNo=Y411HHFE Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=240119615 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: (null):
In my .config: CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_AMD74XX=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_AUTO=y
I am running kernel 2.6.4-rc1-mm1
What am I missing?
Thx
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |