Messages in this thread | | | From | chakkerz_dev@optusnet ... | Date | Tue, 23 Mar 2004 09:11:38 +1100 | Subject | T21 config wanted, 2.4 or 2.6, both USB mouse and eth0 (3c556 MiniPCI) |
| |
a T21 is a ThinkPad 21 i take it
now from what i can see here there are a few t21s out there, with different CPUs in them but the network card appears to be consistently 3Com made, which one isn't all that clear to me here. Just check the cat /proc/pci and you should get something like this:
Bus 6, device 0, function 0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16). IRQ 11. Master Capable. Latency=64. Min Gnt=32.Max Lat=64. I/O at 0x4800 [0x48ff]. Non-prefetchable 32 bit memory at 0x11000000 [0x110001ff]. (NOTE i've got a realtek PCMCIA card in this notebook)
So under Device Drivers > Network Support
You've got "Networking support" and "Network device support" enabled
go into "Ethernet (10 or 100 MBti)" and enable support for you card (as determined by the cat /proc/pci) there is support for 3com there.
good luck Christian Unger / Chakkerz - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |