Messages in this thread | | | Date | Sat, 28 Feb 2004 18:43:42 +0700 | From | "Muhammad L." <> | Subject | Linux 2.6.3 + evms 2.2.2 Ext3 fs corruption and journal abortion |
| |
Dear all, (please Cc: me in the answer)
Simple stress test (dd if=/dev/zero of=swapfile bs=1024 count=1048576 # 1Gb) will crash my raid-5 md partition under 2.6.3-mm1 + evms 2.2.2 patches and before under 2.6.0-test9 + evms 2.1.1 or 2.2.0 patches (2.6.0-test9-dm4 or 2.6.0-test9-udm5).
It happens EVERYTIME I do a lot of IO (e.g. copy big files (> 600 megs around), it is systematic. I never had this problem under 2.4.x and I am so sad I am going to downgrade to 2.4.24/25 tonight.
I am in the mood I might reproduce the problem again and log the output of fsck -C -y (takes ages to fsck a 270meg partition)
I have 1 gig of ram, a amd xp2500+ at 1800ghz (not overclocked), currently my raid5 fs contains 274 gigs and the problem under 2.6 was present from the very begining. My raid5 setup is a 4x120Gig each on a separate controler. Again under 2.4 this machine works perfectly and I have copied 100 gig of DV materials around without problems.
Recently when evms 2.2.2 was released I installed a 2.6.3 and tried again.
Thanks and regards,
Muhammad
Here is the most recent dmesg and the initial bug report I prepared and forgot to post on the kernel mailing at the time (mea culpa, mea culpa...)
EXT3-fs error (device dm-2): ext3_readdir: bad entry in directory #35160065: directory entry across blocks - offset=0, inode=1836597052, rec_len=8300, name_len=118 EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2): ext3_readdir: bad entry in directory #35160065: directory entry across blocks - offset=0, inode=1836597052, rec_len=8300, name_len=118 EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted EXT3-fs error (device dm-2) in start_transaction: Journal has aborted
[1.] One line summary of the problem: 2.6.3-mm1 + evms 2.2.2 patches, 2.6.0-test9 + evms 2.1.1/2.2.0 patches: Ext3 fs corruption and journal abortion when writing big files to md device. \ [2.] Full description of the problem/report: Simple stress test (dd if=/dev/zero of=swapfile bs=1024 count=1048576 # 1Gb) will crash my raid-5 md partition under 2.6.3-mm1 + evms 2.2.2 patches and before under 2.6.0-test9 + evms 2.1.1 or 2.2.0 patches (2.6.0-test9-dm4 or 2.6.0-test9-udm5). Under 2.4.22 and its evms 2.x patches on the same machine, the same operation works perfectly (copied 100 gig from a normal partition to the raid-5 md. Applying linus-patch from test9-mm3 which is supposed to fix a related problem doesn't solve the issue and it only makes the dmesg output less verbose. \ I tried running a 2.6.0-test9 with evms 2.1.1 or 2.2.0 patches, I get ext3 corruption under fs load (e.g. creation of a 1gig file). Using 2.4.22 + evms patches works perfect. \ [3.] Keywords (i.e., modules, networking, kernel): 2.6.0 test9 evms ext3 fs corruption md raid journal __journal_remove_journal_head ext3_readdir \ [4.] Kernel version (from /proc/version): Kernel version: (Oh by the way, yes it is a gentoo distribution but a stable branch and no fancy CFLAGS and also it is not a gentoo kernel, just a vanilla one straight from kernel.org) Linux version 2.6.3 (root@dis) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 Wed Feb 18 20:14:27 WIT 2004 Linux version 2.6.0-test9 (root@dis) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #4 Fri Nov 14 04:58:11 WIT 2003 \
\ [5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) hdb: hdb1 hdb2 hdb: hdb1 hdb2 Adding 257000k swap on /dev/evms/hdb1. Priority:-1 extents:1 EXT3-fs error (device dm-8): ext3_readdir: bad entry in directory #35536897: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0 Aborting journal on device dm-8. ext3_abort called. EXT3-fs abort (device dm-8): ext3_journal_start: Detected aborted journal Remounting filesystem read-only EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in ext3_ordered_writepage: IO failure ext3_try_to_allocate: aborting transaction: Journal has aborted in __ext3_journal_get_undo_access<2>EXT3-fs error (device dm-8) in ext3_new_block: Journal has aborted EXT3-fs error (device dm-8) in ext3_prepare_write: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted Assertion failure in __journal_remove_journal_head() at fs/jbd/journal.c:1733: "!jh->b_committed_data" ------------[ cut here ]------------ kernel BUG at fs/jbd/journal.c:1733! invalid operand: 0000 [#1] CPU: 0 EIP: 0060:[<c01a0d41>] Tainted: PF EFLAGS: 00010286 EIP is at __journal_remove_journal_head+0xf5/0x1b4 eax: 0000006a ebx: dccb6528 ecx: c1bfecc0 edx: c040cdd8 esi: d7a2efc0 edi: 00000000 ebp: c1bf9d8c esp: c1bf9d70 ds: 007b es: 007b ss: 0068 Process kjournald (pid: 29, threadinfo=c1bf8000 task=c1bfecc0) Stack: c03a5740 c038d837 c03a2731 000006c5 c03a2531 c1bf8000 dccb6528 c1bf9d9c c01a0e1f dccb6528 c1bf8000 c1bf9db0 c019b80e dccb6528 d7a2efc0 f785c480 c1bf9f60 c019bd28 f6a44380 d7a2efc0 c1bf9e54 000017b6 f8ab8037 f6a443dc Call Trace: [<c01a0e1f>] journal_remove_journal_head+0x1f/0x3d [<c019b80e>] journal_refile_buffer+0x3c/0x67 [<c019bd28>] journal_commit_transaction+0x426/0x12f6 [<f8ab8037>] __nvsym02561+0x4f/0x6c [nvidia] [<c011f4b4>] autoremove_wake_function+0x0/0x4b [<f8ac29aa>] __nvsym00830+0x12/0x18 [nvidia] [<c011f4b4>] autoremove_wake_function+0x0/0x4b [<c019ee21>] kjournald+0xc4/0x251 [<c011f4b4>] autoremove_wake_function+0x0/0x4b [<c011f4b4>] autoremove_wake_function+0x0/0x4b [<c010b226>] ret_from_fork+0x6/0x14 [<c019ed4c>] commit_timeout+0x0/0xc [<c019ed5d>] kjournald+0x0/0x251 [<c01092a5>] kernel_thread_helper+0x5/0xb \ Code: 0f 0b c5 06 31 27 3a c0 eb a0 c7 44 24 10 47 25 3a c0 c7 44 <6>note: kjournald[29] exited with preempt_count 2 EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted EXT3-fs error (device dm-8) in start_transaction: Journal has aborted root@dis:/# \ Code disassembly: 0x80493f4 <str>: ud2a 0x80493f6 <str+2>: lds (%esi),%eax 0x80493f8 <str+4>: xor %esp,(%edi) 0x80493fa <str+6>: cmp %al,%al 0x80493fc <str+8>: jmp 0x804939e 0x80493fe <str+10>: movl $0xc03a2547,0x10(%esp,1) 0x8049406 <str+18>: movl $0x10000,0x0(%eax,%eax,1) \ code disassembly from the test9 + linus.patch (mm3), it doesn't output an oops but still fails. 0xc01a0d77 <__journal_remove_journal_head+299>: ud2a 0xc01a0d79 <__journal_remove_journal_head+301>: les (%esi),%eax 0xc01a0d7b <__journal_remove_journal_head+303>: xor %esp,(%edi) 0xc01a0d7d <__journal_remove_journal_head+305>: cmp %al,%al 0xc01a0d7f <__journal_remove_journal_head+307>: jmp 0xc01a0ce4 <__journal_remove_journal_head+152> 0xc01a0d84 <__journal_remove_journal_head+312>: movl $0xc03a280a,0x10(%esp,1) 0xc01a0d8c <__journal_remove_journal_head+320>: movl $0x6c1,0xc(%esp,1) 0xc01a0d94 <__journal_remove_journal_head+328>: movl $0xc03a2731,0x8(%esp,1) 0xc01a0d9c <__journal_remove_journal_head+336>: movl $0xc038d837,0x4(%esp,1) 0xc01a0da4 <__journal_remove_journal_head+344>: movl $0xc03a5740,(%esp,1) \ [6.] A small shell script or example program which triggers the problem (if possible) dd if=/dev/zero of=swapfile bs=1024 count=1048576 # 1Gb \ [7.] Environment [7.1.] Software (add the output of the ver_linux script here) Gnu C 3.2.3 Gnu make 3.80 util-linux 2.11z mount 2.11z module-init-tools 0.9.12 e2fsprogs 1.33 jfsutils 1.1.2 PPP 2.4.1 nfs-utils 1.0.6 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.9 Net-tools 1.60 Kbd 1.06 Sh-utils 5.0 Modules Loaded XXX \ [7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 2500+ stepping : 0 cpu MHz : 1830.150 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 3643.80 \ 7.3.] Module information (from /proc/modules): loop 12296 0 - Live 0xf9e0e000 rfcomm 34716 3 - Live 0xf8d17000 ipt_state 1472 32 - Live 0xf8a0e000 ipt_LOG 5056 23 - Live 0xf8a63000 iptable_filter 2176 1 - Live 0xf88cf000 ipt_MASQUERADE 2816 5 - Live 0xf88d3000 iptable_nat 19500 2 ipt_MASQUERADE, Live 0xf8ca1000 ip_conntrack 27312 3 ipt_state,ipt_MASQUERADE,iptable_nat, Live 0xf8c88000 ip_tables 16064 5 ipt_state,ipt_LOG,iptable_filter,ipt_MASQUERADE,iptable_nat, Live 0xf8a5e000 ipv6 231936 842 - Live 0xf8ccc000 snd_ens1370 15076 0 - Live 0xf8a59000 snd_ak4531_codec 6848 1 snd_ens1370, Live 0xf88c6000 snd_ens1371 19940 0 - Live 0xf8a53000 snd_intel8x0 29124 0 - Live 0xf8a03000 snd_via82xx 21888 3 - Live 0xf89fc000 snd_ac97_codec 59332 3 snd_ens1371,snd_intel8x0,snd_via82xx, Live 0xf8a10000 snd_mpu401_uart 6080 2 snd_intel8x0,snd_via82xx, Live 0xf88c9000 snd_rawmidi 20768 3 snd_ens1370,snd_ens1371,snd_mpu401_uart, Live 0xf88b3000 tuner 16716 0 - Live 0xf88c0000 tvaudio 20428 0 - Live 0xf88ba000 msp3400 22100 0 - Live 0xf88a6000 bttv 142636 0 - Live 0xf88d6000 video_buf 17092 1 bttv, Live 0xf88ad000 i2c_algo_bit 8840 1 bttv, Live 0xf88a2000 v4l2_common 4928 1 bttv, Live 0xf8897000 btcx_risc 3848 1 bttv, Live 0xf8895000 i2c_core 19268 5 tuner,tvaudio,msp3400,bttv,i2c_algo_bit, Live 0xf889c000 videodev 7680 1 bttv, Live 0xf882e000 nvidia 1701484 16 - Live 0xf8a66000 via_agp 5824 1 - Live 0xf882b000 bnep 13184 2 - Live 0xf8818000 l2cap 21764 9 rfcomm,bnep, Live 0xf8848000 bridge 32788 0 - Live 0xf883e000 hci_usb 9600 0 - Live 0xf8823000 bluetooth 43684 6 rfcomm,bnep,l2cap,hci_usb, Live 0xf8832000 \ [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) dis:/boot$ cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000d4000-000d7bff : Extension ROM 000d8000-000d87ff : Extension ROM 000f0000-000fffff : System ROM 00100000-3ffeffff : System RAM 00100000-003b6abb : Kernel code 003b6abc-004e8aff : Kernel data 3fff0000-3fff2fff : ACPI Non-volatile Storage 3fff3000-3fffffff : ACPI Tables c0000000-cfffffff : 0000:00:00.0 d0000000-d7ffffff : PCI Bus #01 d0000000-d7ffffff : 0000:01:00.0 d8000000-d9ffffff : PCI Bus #01 d8000000-d8ffffff : 0000:01:00.0 db000000-db003fff : 0000:00:0d.0 db004000-db00407f : 0000:00:09.0 db005000-db005fff : 0000:00:08.0 db005000-db005fff : bttv0 db006000-db0067ff : 0000:00:0d.0 db007000-db007fff : 0000:00:08.1 db008000-db0080ff : 0000:00:0f.0 db008000-db0080ff : 8139too db009000-db0090ff : 0000:00:10.2 db009000-db0090ff : ehci_hcd fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved is:/boot$ cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 a000-a07f : 0000:00:09.0 a000-a07f : 0000:00:09.0 a400-a4ff : 0000:00:0f.0 a400-a4ff : 8139too a800-a81f : 0000:00:10.0 a800-a81f : uhci_hcd ac00-ac1f : 0000:00:10.1 ac00-ac1f : uhci_hcd b000-b00f : 0000:00:11.1 b000-b007 : ide0 b008-b00f : ide1 b400-b41f : 0000:00:11.2 b400-b41f : uhci_hcd b800-b81f : 0000:00:11.3 b800-b81f : uhci_hcd bc00-bcff : 0000:00:11.5 bc00-bcff : VIA8233A c000-c007 : 0000:00:13.0 c000-c007 : ide2 c400-c403 : 0000:00:13.0 c402-c402 : ide2 c800-c807 : 0000:00:13.0 c800-c807 : ide3 cc00-cc03 : 0000:00:13.0 cc02-cc02 : ide3 d000-d0ff : 0000:00:13.0 d000-d007 : ide2 d008-d00f : ide3 d400-d407 : 0000:00:13.1 d400-d407 : ide4 d800-d803 : 0000:00:13.1 d802-d802 : ide4 dc00-dc07 : 0000:00:13.1 dc00-dc07 : ide5 e000-e003 : 0000:00:13.1 e002-e002 : ide5 e400-e4ff : 0000:00:13.1 e400-e407 : ide4 e408-e40f : ide5 \ [7.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] Subsystem: ABIT Computer Corp.: Unknown device 7405 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- \ 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: d8000000-d9ffffff Prefetchable memory behind bridge: d0000000-d7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- \ 00:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) Subsystem: Hauppauge computer works Inc. WinTV Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 7 Region 0: Memory at db005000 (32-bit, prefetchable) [size=4K] \ 00:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) Subsystem: Hauppauge computer works Inc. WinTV Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 7 Region 0: Memory at db007000 (32-bit, prefetchable) [size=4K] \ 00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a000 [size=128] Region 1: Memory at db004000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME- 00:0d.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp.: Unknown device 7405 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 7 Region 0: Memory at db006000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at db000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: ABIT Computer Corp.: Unknown device 8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a400 [size=256] Region 1: Memory at db008000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 7405 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin A routed to IRQ 3 Region 4: I/O ports at a800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 7405 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin B routed to IRQ 7 Region 4: I/O ports at ac00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHCI]) Subsystem: ABIT Computer Corp.: Unknown device 7405 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Interrupt: pin C routed to IRQ 10 Region 0: Memory at db009000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge Subsystem: VIA Technologies, Inc. VT8233A ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at b000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 7405 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 3 Region 4: I/O ports at b400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 7405 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 3 Region 4: I/O ports at b800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 40) Subsystem: ABIT Computer Corp.: Unknown device 7405 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 10 Region 0: I/O ports at bc00 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:13.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) Subsystem: Triones Technologies, Inc.: Unknown device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 120 (2000ns min, 2000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at c400 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at cc00 [size=4] Region 4: I/O ports at d000 [size=256] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:13.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) Subsystem: Triones Technologies, Inc.: Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 120 (2000ns min, 2000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d400 [size=8] Region 1: I/O ports at d800 [size=4] Region 2: I/O ports at dc00 [size=8] Region 3: I/O ports at e000 [size=4] Region 4: I/O ports at e400 [size=256] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1) (prog-if 00 [VGA]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4 \ [7.6.] SCSI information (from /proc/scsi/scsi) Attached devices: none \ [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant):
root@dis:/proc# df root@dis:/var/log# swapon -s Filename Type Size Used Priority /.swap-a file 1048568 187972 -1 /.swap-b file 1048568 0 -2 /.swap-c file 1048568 0 -3
Filesystem 1K-blocks Used Available Use% Mounted on /dev/evms/raid5a 354530944 274848692 61673136 82% / none 516736 0 516736 0% /dev/shm root@dis:/var/log# free total used free shared buffers cached Mem: 1033472 1023872 9600 0 121796 156380 -/+ buffers/cache: 745696 287776 Swap: 3145704 187972 2957732
-- Muhammad L. <muhammad@vauban.net>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |