lkml.org 
[lkml]   [2004]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectPROBLEM: iptables don't work with 2.4.25
[1.] One line summary of the problem:
iptables don't work with 2.4.25
[2.] Full description of the problem/report:

If you start the command iptables with
iptables -L
the Kernel will answer tho following rows:

/lib/modules/2.4.25/kernel/net/ipv4/netfilter/ip_tables.o: unresolved symbol
nf_unregister_sockopt
/lib/modules/2.4.25/kernel/net/ipv4/netfilter/ip_tables.o: unresolved symbol
nf_register_sockopt
/lib/modules/2.4.25/kernel/net/ipv4/netfilter/ip_tables.o: insmod
/lib/modules/2.4.25/kernel/net/ipv4/netfilter/ip_tables.o failed
/lib/modules/2.4.25/kernel/net/ipv4/netfilter/ip_tables.o: insmod ip_tables
failed
iptables v1.2.6a: can't initialize iptables table `filter': iptables who?
(do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.

The same output generate modpobe ip_tables

[3.] Keywords (i.e., modules, networking, kernel):
modules, kernel
[4.] Kernel version (from /proc/version):
Linux version 2.4.25 (******) (gcc version 2.95.4 20011002 (Debian
prerelease)) #4 SMP Tue Feb 24 09:37:18 CET 2004
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the
problem (if possible)
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)

If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux ***** 2.4.25 #4 SMP Tue Feb 24 09:37:18 CET 2004 i686 unknown

Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded parport_pc lp parport usb-uhci usb-storage usbcore
sound i810_audio soundcore ac97_codec eepro100 keybdev input

[7.2.] Processor information (from /proc/cpuinfo):

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 996.784
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 1985.74

[7.3.] Module information (from /proc/modules):

parport_pc 24936 1 (autoclean)
lp 5984 1 (autoclean)
parport 24000 1 (autoclean) [parport_pc lp]
usb-uhci 22148 0 (unused)
usb-storage 105856 0 (unused)
usbcore 58784 0 [usb-uhci usb-storage]
sound 54540 0 (unused)
i810_audio 23856 2
soundcore 3844 4 [sound i810_audio]
ac97_codec 11872 0 [i810_audio]
eepro100 18476 1
keybdev 1792 0 (unused)
input 3488 0 [keybdev]

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
78c0-78ff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
78c0-78ff : eepro100
f000-f0ff : Intel Corp. 82801BA/BAM AC'97 Audio
f000-f0ff : Intel ICH2
f400-f43f : Intel Corp. 82801BA/BAM AC'97 Audio
f400-f43f : Intel ICH2
fb00-fb1f : Intel Corp. 82801BA/BAM USB (Hub #1)
fb00-fb1f : usb-uhci
fb80-fb9f : Intel Corp. 82801BA/BAM USB (Hub #2)
fb80-fb9f : usb-uhci
fe00-fe0f : Intel Corp. 82801BA/BAM SMBus
fff0-ffff : Intel Corp. 82801BA IDE U100
fff0-fff7 : ide0
fff8-ffff : ide1
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1fee06bf : System RAM
00100000-002df265 : Kernel code
002df266-003ad37f : Kernel data
1fee06c0-1fee66bf : ACPI Tables
1fee66c0-1feee6ff : ACPI Non-volatile Storage
1feee700-1fffffff : reserved
f8000000-f9ffffff : Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub
fa000000-fdefffff : PCI Bus #02
fa000000-fbffffff : Matrox Graphics, Inc. MGA G400 AGP
fa000000-fa17ffff : vesafb
fdfdf000-fdfdffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
fdfdf000-fdfdffff : eepro100
fdfe0000-fdffffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
fe000000-febfffff : PCI Bus #02
fe000000-fe7fffff : Matrox Graphics, Inc. MGA G400 AGP febfc000-febfffff
: Matrox Graphics, Inc. MGA G400 AGP
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
Capabilities: [88] #09 [f104]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corp.: Unknown device 1131 (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe000000-febfffff
Prefetchable memory behind bridge: fa000000-fdefffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: eff00000-e00fffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge
(ICH2) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100
(rev 02) (prog-if 80 [Master])
Subsystem: IBM: Unknown device 01c6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at fff0 [size=16]

00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A)
(rev 02) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 01c6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at fb00 [size=32]

00:1f.3 SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 02)
Subsystem: IBM: Unknown device 01c6
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at fe00 [size=16]

00:1f.4 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B)
(rev 02) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 01c6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 23
Region 4: I/O ports at fb80 [size=32]

00:1f.5 Multimedia audio controller: Intel Corp. 82820 820 (Camino 2)
Chipset AC'97 Audio Controller (rev 02)
Subsystem: IBM: Unknown device 01c6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at f000 [size=256]
Region 1: I/O ports at f400 [size=64]

01:0e.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 0c)
Subsystem: Intel Corp.: Unknown device 0040
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdfdf000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 78c0 [size=64]
Region 2: Memory at fdfe0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev
85) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G450 Dual Head
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1

[7.6.] SCSI information (from /proc/scsi/scsi)
nc
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):

The kernel was build with make oldconfig and the following make commands as
usuall
The second way was the method from debian with make-kpkg
Both way did't report any error since building the kernel.

My .config you will find in the appendix:

--
GMX ProMail (250 MB Mailbox, 50 FreeSMS, Virenschutz, 2,99 EUR/Monat...)
jetzt 3 Monate GRATIS + 3x DER SPIEGEL +++ http://www.gmx.net/derspiegel +++[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2005-03-22 14:01    [W:0.032 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site