Messages in this thread | | | Date | Tue, 24 Feb 2004 18:52:45 -0500 (EST) | From | Adam K Kirchhoff <> | Subject | 2.6.3 and SBP2 problems. |
| |
Hello all,
I reported this problem back in 2.6.0 and it still seems to exist in 2.6.3. Basically, my firewire hard drive no longer wants to work. I've googled around, and came up with another post to the mailing list suggesting setting serialize_io to 1 in the sbp2 driver, but that didn't help at all.
This has happened with two separate ohci controllers each on a separate machine. The first is identified as a lucent FW323 chip, and the second is an Audigy firewire port. The drive works with both cards under 2.4.25.
This is the output from dmesg:
ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org> ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[e9021000-e90217ff] Max Packet=[2048] ieee1394: Node added: ID:BUS[0-00:1023] GUID[0006ca0e0400880a] ieee1394: Host added: ID:BUS[0-01:1023] GUID[0030dd8000304ddb] ieee1394: unsolicited response packet received - no tlabel match sbp2: $Rev: 1096 $ Ben Collins <bcollins@debian.org> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1) scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices ieee1394: sbp2: Logged into SBP-2 device ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048] Vendor: WDC WD12 Model: 00JB-00CRA1 Rev: Type: Direct-Access ANSI SCSI revision: 06 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: asking for cache data failed sda: assuming drive cache: write through sda:<3>ieee1394: sbp2: aborting sbp2 command 0x28 00 00 00 00 00 00 00 08 00 ieee1394: sbp2: aborting sbp2 command 0x00 00 00 00 00 00 ieee1394: sbp2: reset requested ieee1394: sbp2: Generating sbp2 fetch agent reset ieee1394: sbp2: aborting sbp2 command 0x00 00 00 00 00 00 ieee1394: sbp2: reset requested ieee1394: sbp2: Generating sbp2 fetch agent reset ieee1394: sbp2: aborting sbp2 command 0x00 00 00 00 00 00 ieee1394: sbp2: reset requested ieee1394: sbp2: Generating sbp2 fetch agent reset ieee1394: sbp2: aborting sbp2 command 0x00 00 00 00 00 00 scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0 SCSI error : <1 0 0 0> return code = 0x50000 end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 scsi1 (0:0): rejecting I/O to offline device Buffer I/O error on device sda, logical block 0 unable to read partition table Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
Any ideas?
Adam
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |