Messages in this thread | | | Date | Mon, 23 Feb 2004 21:20:52 +0100 | From | Joachim Berdal Haga <> | Subject | 2.6.3-mm3: usb printer problem (works in stock 2.6.3) |
| |
Printing on usb doesn't work for me in 2.6.3-mm3 (or -mm1). The printer is recognized and a session is opened, but never finished (and nothing is printed). After a few minutes the printer prints out a page saying "PCL6 ERROR - Incomplete session by time out".
This works on plain 2.6.3.
USB debugging messages appended below.
Regards, Joachim B Haga (please CC)
Feb 23 20:48:46 handy kernel: uhci_hcd 0000:00:05.2: wakeup_hc Feb 23 20:48:46 handy kernel: uhci_hcd 0000:00:05.2: port 1 portsc 0082 Feb 23 20:48:46 handy kernel: hub 1-0:1.0: port 1, status 100, change 1, 12 Mb/s Feb 23 20:48:46 handy kernel: uhci_hcd 0000:00:05.2: port 1 portsc 0093 Feb 23 20:48:46 handy kernel: hub 1-0:1.0: port 1, status 101, change 1, 12 Mb/s Feb 23 20:48:46 handy kernel: hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 Feb 23 20:48:46 handy kernel: usb 1-1: new full speed USB device using address 2 Feb 23 20:48:46 handy kernel: uhci_hcd 0000:00:05.2: uhci_result_control: failed with status 440000 Feb 23 20:48:46 handy kernel: [cb37e240] link (0b37e1e2) element (0b387040) Feb 23 20:48:46 handy kernel: 0: [cb387040] link (0b387080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0a8dfda0) Feb 23 20:48:46 handy kernel: 1: [cb387080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Feb 23 20:48:46 handy kernel: Feb 23 20:48:46 handy kernel: uhci_hcd 0000:00:05.2: uhci_result_control: failed with status 440000 Feb 23 20:48:46 handy kernel: [cb37e240] link (0b37e1e2) element (0b387040) Feb 23 20:48:46 handy kernel: 0: [cb387040] link (0b387080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0a8dfda0) Feb 23 20:48:46 handy kernel: 1: [cb387080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Feb 23 20:48:46 handy kernel: Feb 23 20:48:47 handy kernel: usb 1-1: device not accepting address 2, error -110 Feb 23 20:48:47 handy kernel: usb 1-1: new full speed USB device using address 3 Feb 23 20:48:47 handy kernel: uhci_hcd 0000:00:05.2: uhci_result_control: failed with status 440000 Feb 23 20:48:47 handy kernel: [cb37e240] link (0b37e1e2) element (0b387040) Feb 23 20:48:47 handy kernel: 0: [cb387040] link (0b387080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0a8dfda0) Feb 23 20:48:47 handy kernel: 1: [cb387080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Feb 23 20:48:47 handy kernel: Feb 23 20:48:47 handy kernel: uhci_hcd 0000:00:05.2: uhci_result_control: failed with status 440000 Feb 23 20:48:47 handy kernel: [cb37e240] link (0b37e1e2) element (0b387040) Feb 23 20:48:47 handy kernel: 0: [cb387040] link (0b387080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0a8dfda0) Feb 23 20:48:47 handy kernel: 1: [cb387080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Feb 23 20:48:47 handy kernel: Feb 23 20:48:47 handy kernel: usb 1-1: device not accepting address 3, error -110 Feb 23 20:48:47 handy kernel: uhci_hcd 0000:00:05.2: port 1 portsc 009b Feb 23 20:48:47 handy kernel: hub 1-0:1.0: port 1, status 101, change 3, 12 Mb/s Feb 23 20:48:47 handy kernel: uhci_hcd 0000:00:05.2: port 1 portsc 0099 Feb 23 20:48:48 handy kernel: hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 Feb 23 20:48:48 handy kernel: usb 1-1: new full speed USB device using address 4 Feb 23 20:48:48 handy kernel: usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3 Feb 23 20:48:48 handy kernel: drivers/usb/core/message.c: USB device number 4 default language ID 0x409 Feb 23 20:48:48 handy kernel: usb 1-1: Product: Samsung ML-1710 Series Feb 23 20:48:48 handy kernel: usb 1-1: Manufacturer: Samsung Electronics Co., Ltd. Feb 23 20:48:48 handy kernel: usb 1-1: SerialNumber: 2221BAAW900597A0 Feb 23 20:48:48 handy kernel: drivers/usb/core/usb.c: usb_hotplug Feb 23 20:48:48 handy kernel: usb 1-1: registering 1-1:1.0 (config #1, interface 0) Feb 23 20:48:48 handy kernel: drivers/usb/core/usb.c: usb_hotplug Feb 23 20:48:48 handy kernel: usblp 1-1:1.0: usb_probe_interface Feb 23 20:48:48 handy kernel: usblp 1-1:1.0: usb_probe_interface - got id Feb 23 20:48:48 handy kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x323A Feb 23 20:48:48 handy kernel: drivers/usb/core/file.c: looking for a minor, starting at 0 Feb 23 20:48:48 handy kernel: drivers/usb/core/usb.c: registered new driver usblp Feb 23 20:48:48 handy kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |