Messages in this thread Patch in this message | | | From | Bartlomiej Zolnierkiewicz <> | Subject | [PATCH] move CONFIG_HOTPLUG to kernel/Kconfig.hotplug | Date | Sun, 15 Feb 2004 01:57:05 +0100 |
| |
I've also noticed that some archs (cris, h8300, m68k and sparc) don't have HOTPLUG in their Kconfig files, shame on you - no udev for you 8).
BTW maybe HOTPLUG should be moved from "Bus options" to "General setup"?
linux-2.6.3-rc2-bk4-root/arch/alpha/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/arm/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/arm26/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/i386/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/ia64/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/m68knommu/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/mips/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/ppc/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/ppc64/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/sh/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/sparc64/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/v850/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/arch/x86_64/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/drivers/parisc/Kconfig | 18 +----------------- linux-2.6.3-rc2-bk4-root/drivers/s390/Kconfig | 18 ------------------ linux-2.6.3-rc2-bk4-root/kernel/Kconfig.hotplug | 17 +++++++++++++++++ 16 files changed, 31 insertions(+), 256 deletions(-)
diff -puN arch/alpha/Kconfig~Kconfig_hotplug arch/alpha/Kconfig --- linux-2.6.3-rc2-bk4/arch/alpha/Kconfig~Kconfig_hotplug 2004-02-15 01:17:55.118977544 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/alpha/Kconfig 2004-02-15 01:18:51.502405960 +0100 @@ -569,23 +569,7 @@ config VERBOSE_MCHECK_ON source "drivers/pci/Kconfig" source "drivers/eisa/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/arm26/Kconfig~Kconfig_hotplug arch/arm26/Kconfig --- linux-2.6.3-rc2-bk4/arch/arm26/Kconfig~Kconfig_hotplug 2004-02-15 01:16:53.573333904 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/arm26/Kconfig 2004-02-15 01:17:19.321419600 +0100 @@ -118,23 +118,7 @@ config XIP_KERNEL Select this option to create a kernel that can be programed into the OS ROMs. -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" comment "At least one math emulation must be selected" diff -puN arch/arm/Kconfig~Kconfig_hotplug arch/arm/Kconfig --- linux-2.6.3-rc2-bk4/arch/arm/Kconfig~Kconfig_hotplug 2004-02-15 01:19:03.363602784 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/arm/Kconfig 2004-02-15 01:19:25.845185064 +0100 @@ -365,23 +365,7 @@ endif source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/i386/Kconfig~Kconfig_hotplug arch/i386/Kconfig --- linux-2.6.3-rc2-bk4/arch/i386/Kconfig~Kconfig_hotplug 2004-02-15 01:07:00.758455464 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/i386/Kconfig 2004-02-15 01:13:19.196924072 +0100 @@ -1131,23 +1131,7 @@ config SCx200 This support is also available as a module. If compiled as a module, it will be called scx200. -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/ia64/Kconfig~Kconfig_hotplug arch/ia64/Kconfig --- linux-2.6.3-rc2-bk4/arch/ia64/Kconfig~Kconfig_hotplug 2004-02-15 01:19:55.684648776 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/ia64/Kconfig 2004-02-15 01:20:36.384461464 +0100 @@ -439,23 +439,7 @@ config PCI_DOMAINS source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable devices" - help - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pci/hotplug/Kconfig" diff -puN arch/m68knommu/Kconfig~Kconfig_hotplug arch/m68knommu/Kconfig --- linux-2.6.3-rc2-bk4/arch/m68knommu/Kconfig~Kconfig_hotplug 2004-02-15 01:11:48.543705456 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/m68knommu/Kconfig 2004-02-15 01:13:08.500550168 +0100 @@ -464,23 +464,7 @@ config COMEMPCI source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable device" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/mips/Kconfig~Kconfig_hotplug arch/mips/Kconfig --- linux-2.6.3-rc2-bk4/arch/mips/Kconfig~Kconfig_hotplug 2004-02-15 01:21:28.093600480 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/mips/Kconfig 2004-02-15 01:22:15.614376224 +0100 @@ -1104,23 +1104,7 @@ config MCA config SBUS bool -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/ppc64/Kconfig~Kconfig_hotplug arch/ppc64/Kconfig --- linux-2.6.3-rc2-bk4/arch/ppc64/Kconfig~Kconfig_hotplug 2004-02-15 01:16:06.581477752 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/ppc64/Kconfig 2004-02-15 01:16:35.988007280 +0100 @@ -227,23 +227,7 @@ source "fs/Kconfig.binfmt" source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/ppc/Kconfig~Kconfig_hotplug arch/ppc/Kconfig --- linux-2.6.3-rc2-bk4/arch/ppc/Kconfig~Kconfig_hotplug 2004-02-15 01:22:44.675958192 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/ppc/Kconfig 2004-02-15 01:23:28.560286760 +0100 @@ -978,23 +978,7 @@ config PCI_PERMEDIA source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/sh/Kconfig~Kconfig_hotplug arch/sh/Kconfig --- linux-2.6.3-rc2-bk4/arch/sh/Kconfig~Kconfig_hotplug 2004-02-15 01:23:48.093317288 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/sh/Kconfig 2004-02-15 01:24:24.397798168 +0100 @@ -609,23 +609,7 @@ source "arch/sh/drivers/pci/Kconfig" source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/sparc64/Kconfig~Kconfig_hotplug arch/sparc64/Kconfig --- linux-2.6.3-rc2-bk4/arch/sparc64/Kconfig~Kconfig_hotplug 2004-02-15 01:15:16.056158768 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/sparc64/Kconfig 2004-02-15 01:15:54.780271808 +0100 @@ -186,23 +186,7 @@ config SPARC64 SPARC64 ports; its web page is available at <http://www.ultralinux.org/>. -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" # Global things across all Sun machines. config RWSEM_GENERIC_SPINLOCK diff -puN arch/v850/Kconfig~Kconfig_hotplug arch/v850/Kconfig --- linux-2.6.3-rc2-bk4/arch/v850/Kconfig~Kconfig_hotplug 2004-02-15 01:24:48.776092104 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/v850/Kconfig 2004-02-15 01:25:22.365985664 +0100 @@ -236,23 +236,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MC source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable device" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN arch/x86_64/Kconfig~Kconfig_hotplug arch/x86_64/Kconfig --- linux-2.6.3-rc2-bk4/arch/x86_64/Kconfig~Kconfig_hotplug 2004-02-15 01:13:37.002217256 +0100 +++ linux-2.6.3-rc2-bk4-root/arch/x86_64/Kconfig 2004-02-15 01:14:37.996944648 +0100 @@ -315,23 +315,7 @@ config PCI_USE_VECTOR source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well-known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems, or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN drivers/parisc/Kconfig~Kconfig_hotplug drivers/parisc/Kconfig --- linux-2.6.3-rc2-bk4/drivers/parisc/Kconfig~Kconfig_hotplug 2004-02-15 01:51:06.950173176 +0100 +++ linux-2.6.3-rc2-bk4-root/drivers/parisc/Kconfig 2004-02-15 01:51:40.267108232 +0100 @@ -143,24 +143,8 @@ config PDC_CHASSIS This has nothing to do with Chassis LCD and LED support. If unsure, say Y. - -config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. +source "kernel/Kconfig.hotplug" source "drivers/pcmcia/Kconfig" diff -puN drivers/s390/Kconfig~Kconfig_hotplug drivers/s390/Kconfig --- linux-2.6.3-rc2-bk4/drivers/s390/Kconfig~Kconfig_hotplug 2004-02-15 01:42:36.325799880 +0100 +++ linux-2.6.3-rc2-bk4-root/drivers/s390/Kconfig 2004-02-15 01:50:29.467871352 +0100 @@ -165,24 +165,6 @@ config S390_TAPE_34XX endmenu - config HOTPLUG bool default y - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and KMOD, and build a modular kernel. Get agent - software (at <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. - - diff -puN /dev/null kernel/Kconfig.hotplug --- /dev/null 2004-01-17 00:25:55.000000000 +0100 +++ linux-2.6.3-rc2-bk4-root/kernel/Kconfig.hotplug 2004-02-15 01:49:57.404745688 +0100 @@ -0,0 +1,17 @@ +config HOTPLUG + bool "Support for hot-pluggable devices" + help + Say Y here if you want to plug devices into your computer while + the system is running, and be able to use them quickly. In many + cases, the devices can likewise be unplugged at any time too. + + One well known example of this is PCMCIA- or PC-cards, credit-card + size devices such as network cards, modems or hard drives which are + plugged into slots found on all modern laptop computers. Another + example, used on modern desktops as well as laptops, is USB. + + Enable HOTPLUG and KMOD, and build a modular kernel. Get agent + software (at <http://linux-hotplug.sourceforge.net/>) and install it. + Then your kernel will automatically call out to a user mode "policy + agent" (/sbin/hotplug) to load modules and set up software needed + to use devices as you hotplug them. _
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |