Messages in this thread | | | From | Bernhard Rosenkraenzer <> | Subject | Current saa7134 driver breaks KNC One Tv-Station DVR (card=24) | Date | Tue, 28 Dec 2004 18:21:53 +0100 |
| |
Trying to modprobe saa7134 with this card results in a hanging modprobe process.
dmesg gets: saa7130/34: v4l2 driver version 0.2.12 loaded ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177 saa7134[0]: found at 0000:00:06.0, rev: 1, irq: 177, latency: 64, mmio: 0xdfff9c00 saa7134[0]: subsystem: 1894:a006, board: KNC One TV-Station DVR [card=24,autodetected] saa7134[0]: board init: gpio is 830000 saa7134[0]: i2c eeprom 00: 94 18 06 a0 06 80 00 01 00 00 00 00 00 00 01 00 saa7134[0]: i2c eeprom 10: 00 ff 86 0e ff 20 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 03 06 ff 01 df ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner: chip found at addr 0xc0 i2c-bus saa7134[0] tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7134[0] tda9885/6/7: chip found @ 0x86 saa7134[0]/irq[10,-133081]: r=0x20 s=0x00 PE saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
At that point, modprobe hangs; I can still use the box in other ttys, but [of course] the saa7134 card doesn't work.
This is reproducable at least with with 2.6.10-rc3-mm1, 2.6.10 and 2.6.10-ac1; the card used to work with earlier releases (I can't remember the last version that worked though, haven't used it for a while).
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |