lkml.org 
[lkml]   [2004]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: readcd hangs in blk_execute_rq
> > And here it hangs. ps shows readcd is in D state, in blk_execute_rq.
> > dmesg shows lines of
> >
> > hdc: lost interrupt

Meanwhile I found out that if I eject the CD by pressing button, it
resumes its work and reports error to the user process.

> > ide-cd: cmd 0x28 timed out
> > hdc: DMA interrupt recovery
> > hdc: lost interrupt
> > hdc: status timeout: status=0xd0 { Busy }
> > hdc: status timeout: error=0x00
> > hdc: DMA disabled
> > hdc: drive not ready for command
> > hdc: ATAPI reset complete
>
> Did it previously work reliably with dma (which kernel)? Does it now
> work reliably without dma now? Do send your entire dmesg after a boot
> too, btw.

It worked in earlier 2.4 kernels (2.4.18?) with DMA - I don't remember
if it had some reliability problems. Since then, it's no dma. We have 3
such computers here (Intel D816EEA2 mainboard, this specific Sony CDrom)
and they all behave the same.

--
Meelis Roos (mroos@linux.ee)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [W:0.666 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site