lkml.org 
[lkml]   [2004]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: readcd hangs in blk_execute_rq
On Thu, Oct 21 2004, Meelis Roos wrote:
> > > > > ide-cd: cmd 0x28 timed out
> > > > > hdc: DMA interrupt recovery
> > > > > hdc: lost interrupt
> > > > > hdc: status timeout: status=0xd0 { Busy }
> > > > > hdc: status timeout: error=0x00
> > > > > hdc: DMA disabled
> > > > > hdc: drive not ready for command
> > > > > hdc: ATAPI reset complete
>
> > > It worked in earlier 2.4 kernels (2.4.18?) with DMA - I don't remember
> > > if it had some reliability problems. Since then, it's no dma. We have 3
> > > such computers here (Intel D816EEA2 mainboard, this specific Sony CDrom)
> > > and they all behave the same.
> >
> > 2.4.x never used dma for this operation. Does 2.6.9 work if you turn off
> > dma first?
>
> I have not tried this operation before. Reading data disks with DMA
> worked and that's what I have used. I did read the same disk with
> readdisk subcommand on readcd currently, it was successful until the end
> of disk (6xx MB - maybe the end of the disk).

Yes you are right, readcd should use dma.

> Will try it with turning DMA off first.

Ok

--
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [W:0.062 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site