Messages in this thread | | | Date | Sat, 02 Oct 2004 15:02:52 +0200 | From | "Gerard H. Pille" <> | Subject | usb on amd-756 broken since 2.6.6 |
| |
hallo,
The last kernel on which I could succesfully mount /proc/bus/usb and "cat /proc/bus/usb/devices" is 2.6.5, since then, the cat hangs. I am not sure if the trouble starts with 2.6.6 or 2.6.7, since I can not boot with 2.6.6, the boot hangs on the hdd, a cdrom. If I could find patches to get 2.6.6 working, I might be able to further narrow it down.
In /var/log/messages, I only see this "kernel: usb 1-2: control timeout on ep0in".
Linux GHP-AMD650 2.6.8.1 #1 Sat Oct 2 13:28:38 CEST 2004 i686 unknown
Gnu C 2.95.4 Gnu make 3.79.1 binutils 2.13.90.0.18 util-linux 2.11n mount 2.11n module-init-tools 3.0-pre10 e2fsprogs 1.27 PPP 2.4.1 nfs-utils 1.0 Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 2.0.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd ipt_LOG ipt_limit ipt_TCPMSS ipt_MASQUERADE ipt_state iptable_nat ip_conntrack iptable_filter ip_tables parport_pc lp parport af_packet ppp_async crc_ccitt ppp_generic slhc 8139too mii crc32 ohci_hcd usbcore rtc unix
# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : AMD Athlon(tm) Processor stepping : 1 cpu MHz : 648.946 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow bogomips : 1277.95
# lsmod Module Size Used by snd_pcm_oss 61704 0 snd_pcm 103296 1 snd_pcm_oss snd_page_alloc 12360 1 snd_pcm snd_timer 26368 1 snd_pcm snd_mixer_oss 19904 1 snd_pcm_oss snd 61444 4 snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss ipt_LOG 6656 4 ipt_limit 3008 4 ipt_TCPMSS 4800 1 ipt_MASQUERADE 4224 2 ipt_state 2560 4 iptable_nat 24996 2 ipt_MASQUERADE ip_conntrack 36036 3 ipt_MASQUERADE,ipt_state,iptable_nat iptable_filter 3264 1 ip_tables 17872 7 ipt_LOG,ipt_limit,ipt_TCPMSS,ipt_MASQUERADE,ipt_state,iptable_nat,iptable_filter parport_pc 33824 1 lp 10820 2 parport 41792 2 parport_pc,lp af_packet 21700 4 ppp_async 11648 1 crc_ccitt 2432 1 ppp_async ppp_generic 26444 5 ppp_async slhc 7808 1 ppp_generic 8139too 23680 0 mii 5376 1 8139too crc32 4544 1 8139too ohci_hcd 33280 0 usbcore 123860 3 ohci_hcd rtc 12488 0 unix 27852 219
# cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 5008-500b : ACPI timer 5010-5015 : ACPI CPU throttle d000-d003 : 0000:00:00.0 d400-d4ff : 0000:00:08.0 d400-d4ff : 8139too d800-d87f : 0000:00:09.0 dc00-dc0f : 0000:00:09.1 e000-e0ff : 0000:00:0b.0 e000-e0ff : 8139too f000-f00f : 0000:00:07.1 f000-f007 : ide0 f008-f00f : ide1
# cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cbfff : Video ROM 000f0000-000fffff : System ROM 00100000-17feffff : System RAM 00100000-0026182a : Kernel code 0026182b-0032853f : Kernel data 17ff0000-17ff2fff : ACPI Non-volatile Storage 17ff3000-17ffffff : ACPI Tables d0000000-d7ffffff : 0000:00:00.0 d8000000-dfffffff : PCI Bus #01 d8000000-dfffffff : 0000:01:05.0 e0000000-e1ffffff : PCI Bus #01 e0000000-e0ffffff : 0000:01:05.0 e3000000-e300ffff : 0000:00:0a.0 e3010000-e30100ff : 0000:00:08.0 e3010000-e30100ff : 8139too e3011000-e3011fff : 0000:00:00.0 e3012000-e3012fff : 0000:00:07.4 e3012000-e3012fff : ohci_hcd e3013000-e30130ff : 0000:00:0b.0 e3013000-e30130ff : 8139too ffff0000-ffffffff : reserved
# lspci -vvv 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e3011000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at d000 [disabled] [size=4] Capabilities: [a0] AGP version 1.0 Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d8000000-dfffffff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev 03) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (rev 06) (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (20000ns max), cache line size 08 Interrupt: pin D routed to IRQ 11 Region 0: Memory at e3012000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d400 [size=256] Region 1: Memory at e3010000 (32-bit, non-prefetchable) [size=256] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A [FM801] (rev b1) Subsystem: Fortemedia, Inc: Unknown device 1319 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 10000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d800 [size=128] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 Gameport controller: Fortemedia, Inc Xwave QS3000A [FM801 game port] (rev b1) (prog-if 10 [Extended]) Subsystem: Fortemedia, Inc: Unknown device 1319 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 10000ns max) Region 0: I/O ports at dc00 [size=16] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Serial controller: Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01) (prog-if 00 [8250]) Subsystem: GVC Corporation IBM Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e000 [size=256] Region 1: Memory at e3013000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:05.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev a1) (prog-if 00 [VGA]) Subsystem: Elsa AG: Unknown device 0c60 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Any advice would, as usually, be very well come.
Geert
PS. my actual address is g dot h dot p at s k y n e t dot be - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |