Messages in this thread | | | Subject | Problem - 2.6.0 Kernel and irq 18: nobody cared! | From | Jan-Christian Treusch <> | Date | 08 Jan 2004 21:17:28 +0100 |
| |
Hi,
I have a ACPI problem wenn I use the new 2.6.0 Kernel (with 2.6.0-rc1/2 same problem)
After the kernel initialize my IDE-ports I get the message: irq 18: nobody cared! and I get this message repeatedly, so that I can't use my pc anymore.
dmesg:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH5: chipset revision 2 ICH5: 100% native mode on irq 18 ide0: BM-DMA at 0xef90-0xef97, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xef98-0xef9f, BIOS settings: hdc:DMA, hdd:pio hda: ST380021A, ATA DISK drive hdb: ST340016A, ATA DISK drive ide0 at 0xefe0-0xefe7,0xefae on irq 18 hdc: CD-RW CDR-6S52, ATAPI CD/DVD-ROM drive ide1 at 0xefa0-0xefa7,0xefaa on irq 18 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hdb: max request size: 128KiB hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: hdb1 hdb2 hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12
[.......]
irq 18: nobody cared! Call Trace: [<c010b0bf>] __report_bad_irq+0x2b/0x98 [<c010b0c7>] __report_bad_irq+0x33/0x98 [<c010b1a4>] note_interrupt+0x50/0x78 [<c010b434>] do_IRQ+0xf8/0x180 [<c0109b3c>] common_interrupt+0x18/0x20 [<c01141e4>] delay_tsc+0x14/0x20 [<c01fc5e2>] __delay+0x12/0x18 [<c01fc677>] __const_udelay+0x2b/0x30 [<c02e982a>] psmouse_command+0xea/0x18c [<c02ea2d8>] ps2pp_cmd+0x6c/0x84 [<c02ea5c0>] ps2pp_detect_model+0x20c/0x24c [<c02ea677>] ps2pp_detect+0x77/0x90 [<c02e9aef>] psmouse_extensions+0xe7/0x178 [<c02e9bd9>] psmouse_probe+0x59/0x74 [<c02e9ec6>] psmouse_connect+0xbe/0x1d8 [<c02eb9fb>] serio_find_dev+0x2b/0x54 [<c02ebe07>] __serio_register_port+0x27/0x2c [<c02ebdb1>] serio_register_port+0x31/0x4c [<c04e8796>] i8042_port_register+0x4a/0x6c [<c04e891e>] i8042_init+0xce/0x190 [<c04d282d>] do_initcalls+0x39/0x90 [<c04d28a0>] do_basic_setup+0x1c/0x2c [<c010510d>] init+0x65/0x168 [<c01050a8>] init+0x0/0x168 [<c0107289>] kernel_thread_helper+0x5/0xc
handlers: [<c0295974>] (ide_intr+0x0/0x1b4) [<c0295974>] (ide_intr+0x0/0x1b4) Disabling IRQ #18
[......]
I'm able to boot when I add "noirqdebug" as a kernel parameter but then ACPI doesn't work (My pc doesn't power down) and sometimes my pc stops and does for a moment nothing without writing any error messages.
With the 2.4.23 kernel my pc does only boot with "acpi=off". Hyper Threading doesn't work and therefore I have a bad performance.
Does anyone know what's wrong? Thanks fo help.
Jan-Christian Treusch
Here some useful info's:
My Hardware:
Mainboard is an Asus P4P800 Deluxe (Intel i865PE Chipset) newest BIOS version VIA Raid-Controller deaktivated 2 Seagate UMDA5 HDD (Parallel ATA) Intel P4 2.4 GHz HT
My Software:
Debian Woody 3.0r1 XFree86 4.1.0.1
I compiled the kernel without module support.
cat /proc/version: Linux version 2.6.0 (root@debian) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 SMP Sun Jan 4 13:00:38 CET 2004
kernel parameters: noirqdebug
sh /scripts/ver_linux
Linux debian 2.6.0 #3 SMP Sun Jan 4 13:00:38 CET 2004 i686 unknown Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11n mount 2.11n module-init-tools implemented e2fsprogs 1.27 PPP 2.4.1 isdn4k-utils 3.1pre4 nfs-utils 1.0 Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 100. Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.11
cat /proc/cpuinfo
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.40GHz stepping : 9 cpu MHz : 2881.557 cache size : 512 KB physical id : 0 siblings : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 5685.24
processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.40GHz stepping : 9 cpu MHz : 2881.557 cache size : 512 KB physical id : 0 siblings : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 5750.7
cat /proc/ioports
0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 03c0-03df : vga+ 03f8-03ff : serial 0400-041f : 0000:00:1f.3 0cf8-0cff : PCI conf1 d800-d8ff : 0000:02:05.0 d800-d8ff : SysKonnect SK-98xx dc00-dc7f : 0000:02:03.0 e800-e8ff : 0000:00:1f.5 ee80-eebf : 0000:00:1f.5 eec0-eedf : 0000:00:1d.0 eec0-eedf : uhci_hcd ef00-ef1f : 0000:00:1d.1 ef00-ef1f : uhci_hcd ef90-ef9f : 0000:00:1f.1 ef90-ef97 : ide0 ef98-ef9f : ide1 efa0-efa7 : 0000:00:1f.1 efa0-efa7 : ide1 efa8-efab : 0000:00:1f.1 efaa-efaa : ide1 efac-efaf : 0000:00:1f.1 efae-efae : ide0 efe0-efe7 : 0000:00:1f.1 efe0-efe7 : ide0
cat /proc/iomem
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-1ff2ffff : System RAM 00100000-0039d3b2 : Kernel code 0039d3b3-004cfd7f : Kernel data 1ff30000-1ff3ffff : ACPI Tables 1ff40000-1ffeffff : ACPI Non-volatile Storage 1fff0000-1fffffff : reserved 20000000-200003ff : 0000:00:1f.1 f3f00000-f7efffff : PCI Bus #01 f4000000-f5ffffff : 0000:01:00.0 f8000000-fbffffff : 0000:00:00.0 fd700000-fe7fffff : PCI Bus #01 fd800000-fdffffff : 0000:01:00.0 fe7fc000-fe7fffff : 0000:01:00.0 fe900000-fe9fffff : 0000:02:0b.0 fe900000-fe902fff : CS46xx_BA1_data0 fe910000-fe9137ff : CS46xx_BA1_data1 fe920000-fe926fff : CS46xx_BA1_pmem fe930000-fe9300ff : CS46xx_BA1_reg feaf8000-feafbfff : 0000:02:05.0 feaf8000-feafbfff : SysKonnect SK-98xx feafe000-feafefff : 0000:02:0b.0 feafe000-feafefff : CS46xx_BA0 feaff800-feafffff : 0000:02:03.0 feaff800-feafffff : ohci1394 febff000-febff0ff : 0000:00:1f.5 febff400-febff5ff : 0000:00:1f.5 febff800-febffbff : 0000:00:1d.7 febff800-febffbff : ehci_hcd ffb80000-ffffffff : reserved
############################################## lspci -vvv ##############################################
00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 80f2 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] #09 [2106] Capabilities: [a0] AGP version 3.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp.: Unknown device 2571 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fd700000-fe7fffff Prefetchable memory behind bridge: f3f00000-f7efffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp.: Unknown device 24d2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at eec0 [size=32]
00:1d.1 USB Controller: Intel Corp.: Unknown device 24d4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at ef00 [size=32]
00:1d.7 USB Controller: Intel Corp.: Unknown device 24dd (rev 02) (prog-if 20) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [20a0]
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe800000-feafffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at efe0 [size=8] Region 1: I/O ports at efac [size=4] Region 2: I/O ports at efa0 [size=8] Region 3: I/O ports at efa8 [size=4] Region 4: I/O ports at ef90 [size=16] Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24d5 (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 80f3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at ee80 [size=64] Region 2: Memory at febff400 (32-bit, non-prefetchable) [size=512] Region 3: Memory at febff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G450 32Mb SDRAM Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 8000ns max), cache line size 04 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at fe7fc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at fd800000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at fe7c0000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [f0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. OHCI Compliant IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 808a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max), cache line size 04 Interrupt: pin A routed to IRQ 20 Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at dc00 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Ethernet controller: 3Com Corporation: Unknown device 1700 (rev 12) Subsystem: Asustek Computer, Inc.: Unknown device 80eb Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (5750ns min, 7750ns max), cache line size 04 Interrupt: pin A routed to IRQ 22 Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at d800 [size=256] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data
02:0b.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01) Subsystem: TERRATEC Electronic GmbH: Unknown device 112e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 6000ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Capabilities: [40] Power Management version 2 Flags: PMEClk+ DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
################################################################### Full dmesg with "noirqdebug": ###################################################################
Linux version 2.6.1-rc2 (root@debian) (gcc version 2.95.4 20011002 (Debian prerelease)) #5 SMP Tue Jan 6 19:34:50 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 130864 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126768 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000f9e60 ACPI: XSDT (v001 A M I OEMXSDT 0x08000320 MSFT 0x00000097) @ 0x1ff30100 ACPI: FADT (v003 A M I OEMFACP 0x08000320 MSFT 0x00000097) @ 0x1ff30290 ACPI: MADT (v001 A M I OEMAPIC 0x08000320 MSFT 0x00000097) @ 0x1ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x08000320 MSFT 0x00000097) @ 0x1ff40040 ACPI: DSDT (v001 P4P81 P4P81086 0x00000086 INTL 0x02002026) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: root=/dev/hda6 noirqdebug 1 IRQ lockup detection disabled Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 2881.538 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 513128k/523456k available (2669k kernel code, 9532k reserved, 1229k data, 160k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5685.24 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 per-CPU timeslice cutoff: 1463.12 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5750.78 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Total of 2 processors activated (11436.03 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2880.0263 MHz. ..... host bus clock speed is 240.0021 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 2 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:0) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18 Mode:1 Active:1) 00:00:1f[A] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) 00:00:1f[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16 Mode:1 Active:1) 00:00:1d[A] -> 2-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1) 00:00:1d[B] -> 2-19 -> IRQ 19 Pin 2-18 already programmed IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23 Mode:1 Active:1) 00:00:1d[D] -> 2-23 -> IRQ 23 Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1) 00:02:08[A] -> 2-20 -> IRQ 20 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21 Mode:1 Active:1) 00:02:09[A] -> 2-21 -> IRQ 21 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22 Mode:1 Active:1) 00:02:09[B] -> 2-22 -> IRQ 22 Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-22 already programmed Pin 2-20 already programmed Pin 2-23 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started. Starting balanced_irq Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.5 [Flags: R/O]. udf: registering filesystem ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized mga 3.1.0 20021029 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) sk98lin: Network Device Driver v6.18 (C)Copyright 1999-2003 Marvell(R). eth%d: 3Com Gigabit LOM (3C940) PrefPort:A RlmtMode:Check Link State PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH5: chipset revision 2 ICH5: 100% native mode on irq 18 ide0: BM-DMA at 0xef90-0xef97, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xef98-0xef9f, BIOS settings: hdc:DMA, hdd:pio hda: ST380021A, ATA DISK drive hdb: ST340016A, ATA DISK drive ide0 at 0xefe0-0xefe7,0xefae on irq 18 hdc: CD-RW CDR-6S52, ATAPI CD/DVD-ROM drive ide1 at 0xefa0-0xefa7,0xefaa on irq 18 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hdb: max request size: 128KiB hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: hdb1 hdb2 hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 ohci1394: $Rev: 1087 $ Ben Collins <bcollins@debian.org> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max Packet=[2048] ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 23, pci mem e0828800 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 16, io base 0000eec0 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 19, io base 0000ef00 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver drivers/usb/core/usb.c: registered new driver usbscanner drivers/usb/image/scanner.c: 0.4.16:USB Scanner Driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000295f82] input: PS2++ Logitech Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 19 i2o: Checking for PCI I2O controllers... I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software I2O Block Storage OSM v0.9 (c) Copyright 1999-2001 Red Hat Software. i2o_block: Checking for Boot device... i2o_block: Checking for I2O Block devices... i2o_scsi.c: Version 0.1.2 chain_pool: 0 bytes @ dfc04340 (512 byte buffers X 4 can_queue X 0 i2o controllers) Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). hub 2-0:1.0: new USB device on port 1, assigned address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204 ALSA device list: #0: Sound Fusion CS46xx at 0xfeafe000/0xfe900000, irq 23 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 160k freed hub 2-0:1.0: new USB device on port 2, assigned address 3 Adding 538136k swap on /dev/hda7. Priority:-1 extents:1 EXT3 FS on hda6, internal journal serio: kseriod exiting exiting...exiting...
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |