lkml.org 
[lkml]   [2004]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [discuss] Re: kgdb for x86_64 2.6 kernels
Date
Done. Thanks.

On Sunday 11 Jan 2004 1:00 am, Pavel Machek wrote:
> Hi!
>
> > Well said!
> >
> > I have released kgdb 2.0.1 for kernel 2.6.1:
> > http://kgdb.sourceforge.net/linux-2.6.1-kgdb-2.0.1.tar.bz2
> >
> > It doesn't contain any assert stuff. I have split it into multiple parts
> > to make a merge easier. Please let me know if you want me to further
> > split them or if you want something to be changed. The README file from
> > this tarball is pasted below.
> >
> > Here is two possible starting points:
> > 1. SMP stuff -> Replace my old smp and nmi handling code.
> > 2. Early boot -> Change 8250.patch to make configuration of serial port
> > either through config options or through command line.
> >
> > I'll attempt reading your patch and merging as much stuff as
> > possible.
>
> Fix round of changes:
>
> * kgdbeth_opt does not initialize ipaddrptr -> this could not have
> ever worked. [Okay, it still does not work].
>
> * Add some basic documentation
>
> * reply_arp can be static, AFAICS
>
> * getDebugChar() no longer exists, kill it from the docs, read_char()
> should be equivalent.
>
> * eth_PutDebugChar() seems to be no longer used. Kill it.
>
> Please apply,
> Pavel
>
>
> --- tmp/linux/drivers/net/kgdb_eth.c 2004-01-10 20:16:10.000000000 +0100
> +++ linux/drivers/net/kgdb_eth.c 2004-01-10 20:10:27.000000000 +0100
> @@ -72,8 +72,7 @@
> read_char(void)
> {
> /* intr routine has queued chars */
> - if (atomic_read(&kgdb_buf_in_cnt) != 0)
> - {
> + if (atomic_read(&kgdb_buf_in_cnt) != 0) {
> int chr;
>
> chr = kgdb_buf[kgdb_buf_out_inx++] ;
> @@ -150,8 +149,6 @@
> kgdb_netdevice->hard_start_xmit(skb, kgdb_netdevice);
> kgdb_netdevice->xmit_lock_owner = -1;
> spin_unlock(&kgdb_netdevice->xmit_lock);
> -
> - /* kfree_skb(skb); */
> }
>
> static void kgdbeth_flush(void)
> @@ -179,7 +176,7 @@
>
> static struct sk_buff *send_skb = NULL;
>
> -void
> +static void
> kgdb_eth_reply_arp(void)
> {
> if (send_skb) {
> @@ -313,12 +310,12 @@
> * Accept an skbuff from net_device layer and add the payload onto
> * kgdb buffer
> *
> - * When the kgdb stub routine getDebugChar() is called it draws characters
> + * When the kgdb stub routine read_char() is called it draws characters
> * out of the buffer until it is empty and then reads directly from the
> * serial port.
> *
> * We do not attempt to write chars from the interrupt routine since
> - * the stubs do all of that via putDebugChar() which writes one byte
> + * the stubs do all of that via write_char() which writes one byte
> * after waiting for the interface to become ready.
> *
> * The debug stubs like to run with interrupts disabled since, after all,
> @@ -434,7 +431,7 @@
> }
>
> /*
> - * getDebugChar
> + * kgdbeth_read_char
> *
> * This is a GDB stub routine. It waits for a character from the
> * serial interface and then returns it. If there is no serial
> @@ -455,42 +452,6 @@
> return chr;
> }
>
> -#define ETH_QUEUE_SIZE 256
> -static char eth_queue[ETH_QUEUE_SIZE];
> -static int outgoing_queue;
> -
> -void
> -eth_flushDebugChar(void)
> -{
> - if(outgoing_queue) {
> - write_buffer(eth_queue, outgoing_queue);
> -
> - outgoing_queue = 0;
> - }
> -}
> -
> -static void
> -put_char_on_queue(int chr)
> -{
> - eth_queue[outgoing_queue++] = chr;
> - if(outgoing_queue == ETH_QUEUE_SIZE)
> - {
> - eth_flushDebugChar();
> - }
> -}
> -
> -/*
> - * eth_putDebugChar
> - *
> - * This is a GDB stub routine. It waits until the interface is ready
> - * to transmit a char and then sends it.
> - */
> -void
> -eth_putDebugChar(int chr)
> -{
> - put_char_on_queue(chr); /* this routine will wait */
> -}
> -
> static void kgdbeth_begin_session(void)
> {
> kgdbeth_is_trapped = 1;
> @@ -546,7 +507,7 @@
> static int __init kgdbeth_opt(char *str)
> {
> char ipaddrstr[16];
> - char *ipaddrptr;
> + char *ipaddrptr = ipaddrstr;
>
> /* interfacenum */
> if (*str < '0' || *str > '9')
> --- /dev/null 2003-09-12 10:38:14.000000000 +0200
> +++ linux/Documentation/kgdb/kgdb_eth.txt 2004-01-10 19:53:37.000000000
> +0100 @@ -0,0 +1,10 @@
> +Some notes about kgdb over ethernet
> +
> + 2004 Pavel Machek <pavel@suse.cz>
> +
> +
> +kgdbeth=interfacenum,localmac,listenport,remoteip,remotemac
> +
> +Then
> + % gdb ./vmlinux
> + (gdb) target remote udp:HOSTNAME:6443

--
Amit Kale
EmSysSoft (http://www.emsyssoft.com)
KGDB: Linux Kernel Source Level Debugger (http://kgdb.sourceforge.net)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.424 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site