Messages in this thread | | | Date | Fri, 12 Sep 2003 16:20:23 -0400 (EDT) | From | Thomas Molina <> | Subject | presario laptop pcmcia loading problems |
| |
My Presario 12XL325 laptop is having a number of problems (see bugzilla 973). During late test4 or early test5 it started refusing to properly initialize my wireless ethernet card, an SMC2632W. I am getting the following output when the card is inserted:
Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Assigned IRQ 9 for device 0000:00:0a.0 Yenta: CardBus bridge found at 0000:00:0a.0 [0e11:b103] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0018, PCI irq9 Socket status: 30000010 cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xe0000-0xfffff orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others) orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others) orinoco_cs: RequestIRQ: Unsupported mode
I recall having the problem with RequestIRQ earlier in the 2.5 series, but it went away. It now looks like it is back. I have attached files with the following debugging info:
config file used to build the kernel /proc/cpuinfo dmesg output /proc/interrupts /proc/ioports lspci output ver_linux output
I hope this helps # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y
# # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y
# # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y
# # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set # CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y
# # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set
# # ACPI (Advanced Configuration and Power Interface) Support # # CONFIG_ACPI_HT is not set # CONFIG_ACPI is not set
# # APM (Advanced Power Management) BIOS Support # CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set CONFIG_APM_CPU_IDLE=y # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set
# # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set
# # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y
# # PCMCIA/CardBus support # CONFIG_PCMCIA=m CONFIG_YENTA=m CONFIG_CARDBUS=y CONFIG_I82092=m CONFIG_TCIC=m
# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_CPCI is not set
# # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m
# # Generic Driver Options # CONFIG_FW_LOADER=m
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set
# # Plug and Play support # # CONFIG_PNP is not set
# # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_LBD is not set
# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y
# # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDE_TCQ is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set
# # SCSI device support # # CONFIG_SCSI is not set
# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set
# # Fusion MPT device support #
# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set
# # I2O device support # # CONFIG_I2O is not set
# # Networking support # CONFIG_NET=y
# # Networking options # CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=m CONFIG_UNIX=m CONFIG_NET_KEY=m CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set CONFIG_INET_IPCOMP=y # CONFIG_IPV6 is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_NETFILTER is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set
# # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set
# # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set
# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set
# # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set
# # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y
# # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set # CONFIG_PCMCIA_WAVELAN is not set # CONFIG_PCMCIA_NETWAVE is not set
# # Wireless 802.11 Frequency Hopping cards support # # CONFIG_PCMCIA_RAYCS is not set
# # Wireless 802.11b ISA/PCI cards support # CONFIG_AIRO=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_PCI_HERMES=m
# # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m CONFIG_AIRO_CS=m CONFIG_PCMCIA_ATMEL=m CONFIG_PCMCIA_WL3501=m CONFIG_NET_WIRELESS=y
# # Token Ring devices (depends on LLC=y) # # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_WAN is not set
# # PCMCIA network device support # CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set # CONFIG_PCMCIA_FMVJ18X is not set # CONFIG_PCMCIA_PCNET is not set # CONFIG_PCMCIA_NMCLAN is not set # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA (infrared) support # # CONFIG_IRDA is not set
# # ISDN subsystem # # CONFIG_ISDN_BOOL is not set
# # Telephony Support # # CONFIG_PHONE is not set
# # Input device support # CONFIG_INPUT=y
# # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set
# # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set
# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set
# # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set # CONFIG_SERIAL_8250_EXTENDED is not set
# # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=512 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set
# # I2C support # CONFIG_I2C=m CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_PROSAVAGE is not set CONFIG_I2C_PHILIPSPAR=m # CONFIG_SCx200_ACB is not set CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ELEKTOR=m CONFIG_I2C_CHARDEV=m
# # I2C Hardware Sensors Mainboard support # CONFIG_I2C_ALI1535=m # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=m CONFIG_I2C_AMD8111=m # CONFIG_I2C_I801 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIAPRO is not set
# # I2C Hardware Sensors Chip support # CONFIG_SENSORS_ADM1021=m # CONFIG_SENSORS_IT87 is not set CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_W83781D=m CONFIG_I2C_SENSOR=m
# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set
# # IPMI # # CONFIG_IPMI_HANDLER is not set
# # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=m # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=m # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set CONFIG_AGP_VIA=m # CONFIG_DRM is not set
# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set
# # Multimedia devices # # CONFIG_VIDEO_DEV is not set
# # Digital Video Broadcasting Devices # # CONFIG_DVB is not set
# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set
# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y # CONFIG_UDF_FS is not set
# # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m # CONFIG_NTFS_FS is not set
# # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y CONFIG_RAMFS=y
# # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set
# # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_SUNRPC=m # CONFIG_SUNRPC_GSS is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set
# # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_NEC98_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_EFI_PARTITION is not set CONFIG_SMB_NLS=y CONFIG_NLS=y
# # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m
# # Graphics support # CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set
# # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_PCI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y
# # Logo configuration # CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y
# # Sound # CONFIG_SOUND=m
# # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_RTCTIMER is not set CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_MEMORY=y CONFIG_SND_DEBUG_DETECT=y
# # Generic devices # CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m
# # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set CONFIG_SND_YMFPCI=m # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_SONICVIBES is not set CONFIG_SND_VIA82XX=m # CONFIG_SND_VX222 is not set
# # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set
# # PCMCIA devices # # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_VXP440 is not set
# # Open Sound System # # CONFIG_SOUND_PRIME is not set
# # USB support # CONFIG_USB=m CONFIG_USB_DEBUG=y
# # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set
# # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=m
# # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set
# # SCSI support is needed for USB Storage # # CONFIG_USB_STORAGE is not set
# # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set
# # USB HID Boot Protocol drivers # CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set
# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set
# # USB Multimedia devices # # CONFIG_USB_DABUSB is not set
# # Video4Linux support is needed for USB Multimedia device support #
# # USB Network adaptors # # CONFIG_USB_AX8817X_STANDALONE is not set # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set
# # USB port drivers # # CONFIG_USB_USS720 is not set
# # USB Serial Converter support # # CONFIG_USB_SERIAL is not set
# # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set
# # Bluetooth support # # CONFIG_BT is not set
# # Profiling support # # CONFIG_PROFILING is not set
# # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_IOVIRT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_PAGEALLOC=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y
# # Security options # # CONFIG_SECURITY is not set
# # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_TEST is not set
# # Library routines # CONFIG_CRC32=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 3 cpu MHz : 648.102 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1265.66
Linux version 2.6.0-test5 (tmolina@lap) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Fri Sep 12 15:05:45 EDT 2003 Video mode to be used for restore is 318 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000077f0000 (usable) BIOS-e820: 00000000077f0000 - 00000000077ffc00 (ACPI data) BIOS-e820: 00000000077ffc00 - 0000000007800000 (ACPI NVS) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 119MB LOWMEM available. On node 0 totalpages: 30704 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 26608 pages, LIFO batch:6 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Building zonelist for node : 0 Kernel command line: ro root=/dev/hda5 vga=792 psmouse_noext=1 pci=usepirqmask Initializing CPU#0 PID hash table entries: 512 (order 9: 4096 bytes) Detected 648.102 MHz processor. Console: colour dummy device 80x25 Memory: 118236k/122816k available (1794k kernel code, 4024k reserved, 613k data, 120k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1265.66 BogoMIPS Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9f7 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Address space collision on region 9 of bridge 0000:00:07.4 [8080:808f] PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 vesafb: framebuffer at 0xf5000000, mapped to 0xc8000000, size 8192k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: protected mode interface info at c000:6812 vesafb: scrolling: redraw vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0 fb0: VESA VGA frame buffer device Console: switching to colour frame buffer device 128x48 pty: 512 Unix98 ptys configured Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) ikconfig 0.6 with /proc/ikconfig Initializing Cryptographic API Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1 ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DJSA-220, ATA DISK drive Using anticipatory scheduling io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/1874KiB Cache, CHS=38760/16/63, UDMA(33) hda: hda1 hda2 < hda5 hda6 > Console: switching to colour frame buffer device 128x48 mice: PS/2 mouse device common for all mice input: PC Speaker input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 128 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 2340) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 120k freed NET: Registered protocol family 1 Real Time Clock Driver v1.12 EXT3 FS on hda5, internal journal Adding 113360k swap on /dev/hda6. Priority:-1 extents:1 NET: Registered protocol family 17 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Assigned IRQ 9 for device 0000:00:0a.0 Yenta: CardBus bridge found at 0000:00:0a.0 [0e11:b103] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0018, PCI irq9 Socket status: 30000010 cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xe0000-0xfffff orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others) orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others) orinoco_cs: RequestIRQ: Unsupported mode lp: driver loaded but no devices found CPU0 0: 323185 XT-PIC timer 1: 693 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 0 XT-PIC yenta 12: 15 XT-PIC i8042 14: 2819 XT-PIC ide0 15: 2 XT-PIC ide1 NMI: 0 ERR: 0 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vesafb 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 1000-10ff : 0000:00:07.5 1400-141f : 0000:00:07.2 1420-142f : 0000:00:07.1 1420-1427 : ide0 1428-142f : ide1 1430-1433 : 0000:00:07.5 1434-1437 : 0000:00:07.5 1438-143f : 0000:00:09.0 1800-18ff : PCI CardBus #02 1c00-1cff : PCI CardBus #02 8000-80ff : 0000:00:07.4 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <available only to root>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f4100000-f57fffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 1420 [size=16] Capabilities: <available only to root>
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 10) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at 1400 [size=32] Capabilities: <available only to root>
00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 10 Capabilities: <available only to root>
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20) Subsystem: Compaq Computer Corporation Soundmax integrated digital audio Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 9 Region 0: I/O ports at 1000 [size=256] Region 1: I/O ports at 1434 [size=4] Region 2: I/O ports at 1430 [size=4] Capabilities: <available only to root>
00:09.0 Communication controller: Conexant HSF 56k Data/Fax Modem (rev 01) Subsystem: Compaq Computer Corporation Bear Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64K] Region 1: I/O ports at 1438 [size=8] Capabilities: <available only to root>
00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) Subsystem: Compaq Computer Corporation: Unknown device b103 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 10 Interrupt: pin A routed to IRQ 9 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade i1 (rev 6a) (prog-if 00 [VGA]) Subsystem: Compaq Computer Corporation CyberBlade i1 AGP Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 9 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=8M] Region 1: Memory at f4100000 (32-bit, non-prefetchable) [size=128K] Region 2: Memory at f4800000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: <available only to root>
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux lap 2.6.0-test5 #1 Fri Sep 12 15:05:45 EDT 2003 i686 i686 i386 GNU/Linux
Gnu C 3.2.2 Gnu make 3.79.1 util-linux 2.11y mount 2.11y e2fsprogs 1.32 jfsutils 1.0.17 reiserfsprogs 3.6.4 pcmcia-cs 3.1.31 quota-tools 3.06. PPP 2.4.1 isdn4k-utils 3.1pre4 nfs-utils 1.0.1 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.11 Net-tools 1.60 Kbd 1.08 Sh-utils 4.5.3 Modules Loaded lp parport orinoco_cs orinoco hermes ds yenta_socket pcmcia_core af_packet rtc unix
| |