Messages in this thread | | | From | Michael Buesch <> | Subject | linux-2.5.66-bk10 hisax oops | Date | Sat, 5 Apr 2003 16:33:20 +0200 |
| |
Hi.
linux-2.5.66-bk10 and bk9. I got an oops with the hisax driver on initializing.
ksymoops 2.4.8 on i686 2.4.21-pre6. Options used -v /home/mb/linux-2.5/linux-2.5.66-bk10/vmlinux (specified) -K (specified) -L (specified) -O (specified) -m /home/mb/linux-2.5/linux-2.5.66-bk10/System.map (specified)
Unable to handle kernel NULL pointer dereference at virtual address 00000004 c030bf8e *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c030bf8e>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010286 eax: 00000000 ebx: cfd0fc00 ecx: cfd12000 edx: cfd0fde0 esi: cfd12000 edi: cfd1210c ebp: c1293de0 esp: c1293dd0 ds: 007b es: 007b ss: 0068 Stack: cfd0fc00 cfd0fc2c cfd0fc00 cfd12000 c1293e10 c0317945 cfd0fc00 cfd12000 cfd1210c cfd1210c cfd12000 c1293e10 c0317858 cfd12124 cfd1210c cfd12000 c1293e2c c0317b74 cfd1210c cfd1213c cfd12000 c1293e9e cfd120da c1293e48 Call Trace: [<c0317945>] init_d_st+0x52/0x11d [<c0317858>] init_PStack+0x20/0xbb [<c0317b74>] init_chan+0x10b/0x115 [<c0317ba4>] CallcNewChan+0x26/0xbf [<c0309e67>] hisax_register+0x86/0x12b [<c021024c>] pci_device_probe+0x5a/0x68 [<c02756a1>] bus_match+0x43/0x6e [<c02757a2>] driver_attach+0x5d/0x6f [<c0275abe>] bus_add_driver+0xe9/0xeb [<c0275ed8>] driver_register+0x3a/0x3e [<c0210363>] pci_register_driver+0x49/0x59 [<c01291ee>] init_workqueues+0x12/0x2c [<c01050a3>] init+0x39/0x196 [<c010506a>] init+0x0/0x196 [<c0107289>] kernel_thread_helper+0x5/0xb Code: 8b 50 04 85 d2 75 0a 8b 5d f8 8b 75 fc 89 ec 5d c3 89 74 24
>>EIP; c030bf8e <setstack_HiSax+85/a2> <=====
>>ebx; cfd0fc00 <_end+f792e48/3fa8304c> >>ecx; cfd12000 <_end+f795248/3fa8304c> >>edx; cfd0fde0 <_end+f793028/3fa8304c> >>esi; cfd12000 <_end+f795248/3fa8304c> >>edi; cfd1210c <_end+f795354/3fa8304c> >>ebp; c1293de0 <_end+d17028/3fa8304c> >>esp; c1293dd0 <_end+d17018/3fa8304c>
Trace; c0317945 <init_d_st+52/11d> Trace; c0317858 <init_PStack+20/bb> Trace; c0317b74 <init_chan+10b/115> Trace; c0317ba4 <CallcNewChan+26/bf> Trace; c0309e67 <hisax_register+86/12b> Trace; c021024c <pci_device_probe+5a/68> Trace; c02756a1 <bus_match+43/6e> Trace; c02757a2 <driver_attach+5d/6f> Trace; c0275abe <bus_add_driver+e9/eb> Trace; c0275ed8 <driver_register+3a/3e> Trace; c0210363 <pci_register_driver+49/59> Trace; c01291ee <init_workqueues+12/2c> Trace; c01050a3 <init+39/196> Trace; c010506a <init+0/196> Trace; c0107289 <kernel_thread_helper+5/b>
Code; c030bf8e <setstack_HiSax+85/a2> 00000000 <_EIP>: Code; c030bf8e <setstack_HiSax+85/a2> <===== 0: 8b 50 04 mov 0x4(%eax),%edx <===== Code; c030bf91 <setstack_HiSax+88/a2> 3: 85 d2 test %edx,%edx Code; c030bf93 <setstack_HiSax+8a/a2> 5: 75 0a jne 11 <_EIP+0x11> Code; c030bf95 <setstack_HiSax+8c/a2> 7: 8b 5d f8 mov 0xfffffff8(%ebp),%ebx Code; c030bf98 <setstack_HiSax+8f/a2> a: 8b 75 fc mov 0xfffffffc(%ebp),%esi Code; c030bf9b <setstack_HiSax+92/a2> d: 89 ec mov %ebp,%esp Code; c030bf9d <setstack_HiSax+94/a2> f: 5d pop %ebp Code; c030bf9e <setstack_HiSax+95/a2> 10: c3 ret Code; c030bf9f <setstack_HiSax+96/a2> 11: 89 74 24 00 mov %esi,0x0(%esp,1)
I traced tty with a serial line:
Linux version 2.5.66-bk10 (mb@lfs) (gcc version 3.2.2) #2 Sam Apr 5 16:13:53 CEST 2003 Video mode to be used for restore is 30b BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000d0000 - 00000000000d4000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000000fff0000 (usable) user: 000000000fff0000 - 000000000fff8000 (ACPI data) user: 000000000fff8000 - 0000000010000000 (ACPI NVS) user: 00000000fec00000 - 00000000fec01000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ffb00000 - 00000000ffc00000 (reserved) user: 00000000fff00000 - 0000000100000000 (reserved) 255MB LOWMEM available. found SMP MP-table at 000fb800 hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 AMI ) @ 0x000fa300 ACPI: RSDT (v001 AMIINT INTEL845 00000.00016) @ 0x0fff0000 ACPI: FADT (v001 AMIINT INTEL845 00000.00017) @ 0x0fff0030 ACPI: MADT (v001 AMIINT INTEL845 00000.00009) @ 0x0fff00c0 ACPI: DSDT (v001 INTEL BROKDALE 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: console=ttyS1,9600 console=tty0 root=/dev/md0 hdd=ide-scsi hdb=ide-scsi mce vga=779 mem=262080K ide_setup: hdd=ide-scsi ide_setup: hdb=ide-scsi Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 2239.543 MHz processor. Console: colour VGA+ 132x50 Calibrating delay loop... 4423.68 BogoMIPS Memory: 254120k/262080k available (2908k kernel code, 7240k reserved, 1002k data, 352k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Machine check exception polling timer started. CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2239.0688 MHz. ..... host bus clock speed is 139.0980 MHz. Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=3 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030328 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.................................................................................................................................................... Table [DSDT] - 495 Objects with 44 Devices 148 Methods 15 Regions ACPI Namespace successfully loaded at root c05414dc evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0731 [06] ev_create_gpe_block : GPE Block: [_GPE] 2 registers at 0000000000000828 on interrupt 9 evgpeblk-0736 [06] ev_create_gpe_block : GPE Block defined as GPE 0x00 to GPE 0x0F evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L0B as GPE number 0x0B evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L03 as GPE number 0x03 evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L04 as GPE number 0x04 evgpeblk-0731 [06] ev_create_gpe_block : GPE Block: [_GPE] 2 registers at 000000000000082C on interrupt 9 evgpeblk-0736 [06] ev_create_gpe_block : GPE Block defined as GPE 0x10 to GPE 0x1F evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L1C as GPE number 0x1C Executing all Device _STA and_INI methods:............................................ 44 Devices found containing: 44 _STA, 1 _INI methods Completing Region/Field/Buffer/Package initialization:.................................................................................. Initialized 10/15 Regions 10/10 Fields 50/50 Buffers 12/12 Packages (495 nodes) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing exfldio-0140 [25] ex_setup_region : Field [TOMR] Base+Offset+Width 0+2+1 is beyond end of region [TMEM] (length 2) dswexec-0421 [17] ds_exec_end_op : [ShiftLeft]: Could not resolve operands, AE_AML_REGION_LIMIT psparse-1121: *** Error: Method execution failed [\_SB_.PCI0.MDET] (Node c12d88a8), AE_AML_REGION_LIMIT psparse-1121: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node c12d8e28), AE_AML_REGION_LIMIT uteval-0098: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node c12d8e28), AE_AML_REGION_LIMIT ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Br ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.95 (c) Adam Belay PnPBIOS: Found PnP BIOS installation structure at 0xc00f7520 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x65ab, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. Enabling SEP on CPU 0 Total HugeTLB memory allocated, 0 Journalled Block Device driver loaded Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1, 8 throttling states) pty: 256 Unix98 ptys configured lp: driver loaded but no devices found Real Time Clock Driver v1.11 Non-volatile memory driver v1.2 Software Watchdog Timer: 0.06, soft_margin: 60 sec, nowayout: 0 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Intel i845 chipset agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html eth0: RealTek RTL-8029 found at 0xb400, IRQ 17, 52:54:05:FF:F5:EA. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Linux video capture interface: v1.00 bttv: driver version 0.9.4 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge is Intel Corp. 82845 845 (Brookdale bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 03:02.0, irq: 18, latency: 32, mmio: 0xddafe000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] bttv0: Hauppauge eeprom: model=44354, tuner=Philips FM1216 (5), radio=yes bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok msp34xx: init: chip=MSP3415D-B3, has NICAM support msp3410: daemon started bttv0: i2c attach [client=MSP3415D-B3,ok] registering 0-0040 tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: i2c attach [client=Philips PAL_BG (FI1216 and compatibles),ok] registering 0-0061 tda9887: probing bt848 #0 i2c adapter [id=0x10005] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 5 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L040AVVA07-0, ATA DISK drive hdb: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: IC35L040AVVA07-0, ATA DISK drive hdd: CD-W54E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=79780/16/63, UDMA(100) hda: hda1 hda2 hda3 < hda5 hda6 > hdc: host protected area => 1 hdc: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=79780/16/63, UDMA(33) hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LG Model: DVD-ROM DRD8160B Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TEAC Model: CD-W54E Rev: 1.0Y Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray mice: PS/2 mouse device common for all mice input: PC Speaker input: GenPS/2 Genius Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 12 i2o: Checking for PCI I2O controllers... I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software I2O Block Storage OSM v0.9 (c) Copyright 1999-2001 Red Hat Software. i2o_block: Checking for Boot device... i2o_block: Checking for I2O Block devices... i2o_scsi.c: Version 0.1.2 chain_pool: 0 bytes @ cfdc66a0 (512 byte buffers X 4 can_queue X 0 i2o controllers) i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208) md: raid0 personality registered as nr 2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 ISDN subsystem initialized PPP BSD Compression module registered HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (kernel) HiSax: Layer1 Revision 2.41.6.5 HiSax: Layer2 Revision 2.25.6.4 HiSax: TeiMgr Revision 2.17.6.3 HiSax: Layer3 Revision 2.17.6.5 HiSax: LinkLayer Revision 2.51.6.6 HiSax: Approval certification failed because of HiSax: unauthorized source code changes hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0 hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1 get_drv 0: 0 -> 1 HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0) Unable to handle kernel NULL pointer dereference at virtual address 00000004 printing eip: c030bf8e *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c030bf8e>] Not tainted EFLAGS: 00010286 EIP is at setstack_HiSax+0x85/0xa2 eax: 00000000 ebx: cfd0fc00 ecx: cfd12000 edx: cfd0fde0 esi: cfd12000 edi: cfd1210c ebp: c1293de0 esp: c1293dd0 ds: 007b es: 007b ss: 0068 Process swapper (pid: 1, threadinfo=c1292000 task=c12ae080) Stack: cfd0fc00 cfd0fc2c cfd0fc00 cfd12000 c1293e10 c0317945 cfd0fc00 cfd12000 cfd1210c cfd1210c cfd12000 c1293e10 c0317858 cfd12124 cfd1210c cfd12000 c1293e2c c0317b74 cfd1210c cfd1213c cfd12000 c1293e9e cfd120da c1293e48 Call Trace: [<c0317945>] init_d_st+0x52/0x11d [<c0317858>] init_PStack+0x20/0xbb [<c0317b74>] init_chan+0x10b/0x115 [<c0317ba4>] CallcNewChan+0x26/0xbf [<c0309e67>] hisax_register+0x86/0x12b [<c021024c>] pci_device_probe+0x5a/0x68 [<c02756a1>] bus_match+0x43/0x6e [<c02757a2>] driver_attach+0x5d/0x6f [<c0275abe>] bus_add_driver+0xe9/0xeb [<c0275ed8>] driver_register+0x3a/0x3e [<c0210363>] pci_register_driver+0x49/0x59 [<c01291ee>] init_workqueues+0x12/0x2c [<c01050a3>] init+0x39/0x196 [<c010506a>] init+0x0/0x196 [<c0107289>] kernel_thread_helper+0x5/0xb Code: 8b 50 04 85 d2 75 0a 8b 5d f8 8b 75 fc 89 ec 5d c3 89 74 24 <0>Kernel panic: Attempted to kill init!
.config (grep "=[y|m]" .config) CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_EXPERIMENTAL=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_X86_PC=y CONFIG_MPENTIUM4=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_PREFETCH=y CONFIG_X86_SSE2=y CONFIG_HUGETLB_PAGE=y CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y CONFIG_NOHIGHMEM=y CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y CONFIG_PM=y CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_ELF=y CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y CONFIG_PARPORT_1284=y CONFIG_PNP=y CONFIG_PNP_NAMES=y CONFIG_PNPBIOS=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_LOOP=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDESCSI=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_PIIX=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_RAID0=y CONFIG_I2O=y CONFIG_I2O_PCI=y CONFIG_I2O_BLOCK=y CONFIG_I2O_SCSI=y CONFIG_I2O_PROC=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_NETFILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_NET_IPGRE=y CONFIG_SYN_COOKIES=y CONFIG_IP_NF_CONNTRACK=y CONFIG_IP_NF_FTP=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_MAC=y CONFIG_IP_NF_MATCH_PKTTYPE=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TCPMSS=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_UNCLEAN=y CONFIG_IP_NF_MATCH_OWNER=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_MIRROR=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_NAT_FTP=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IPV6_SCTP__=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y CONFIG_NE2K_PCI=y CONFIG_PPP=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y CONFIG_PPPOE=y CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y # Token Ring devices (depends on LLC=y) CONFIG_ISDN_BOOL=y CONFIG_ISDN=y CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_PPP_BSDCOMP=y CONFIG_ISDN_AUDIO=y CONFIG_ISDN_TTY_FAX=y CONFIG_ISDN_DRV_HISAX=y CONFIG_HISAX_EURO=y CONFIG_HISAX_FRITZ_PCIPNP=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_PRINTER=y CONFIG_I2C=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_CHARDEV=y CONFIG_SENSORS_W83781D=y CONFIG_I2C_SENSOR=y CONFIG_WATCHDOG=y CONFIG_SOFT_WATCHDOG=y CONFIG_NVRAM=y CONFIG_RTC=y CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VIDEO_DEV=y CONFIG_VIDEO_PROC_FS=y CONFIG_VIDEO_BT848=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y CONFIG_FS_POSIX_ACL=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_15=y CONFIG_VIDEO_SELECT=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=y CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_ENS1371=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_KALLSYMS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y
Regards Michael Buesch. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |