lkml.org 
[lkml]   [2003]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.5.67: ppa driver & preempt == oops
Andrew Morton wrote:

>This patch should make the warnings go away.
>
>
The warnings are still there:

ppa: Version 2.07 (for Linux 2.4.x)
ppa: Found device at ID 6, Attempting to use EPP 16 bit
ppa: Communication established with ID 6 using EPP 16 bit
scsi0 : Iomega VPI0 (ppa) interface
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023d074>] scsi_probe_lun+0x184/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

Vendor: IOMEGA Model: ZIP 100 Rev: D.13
Type: Direct-Access ANSI SCSI revision: 02
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023c7ef>] scsi_get_evpd_page+0x7f/0x120
[<c023ce2e>] scsi_load_identifier+0x2e/0xf0
[<c023d248>] scsi_add_lun+0x158/0x220
[<c023d3b9>] scsi_probe_and_add_lun+0xa9/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0128db4>] queue_work+0x84/0xa0
[<c0240315>] ppa_queuecommand+0x95/0xa0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c023c002>] scsi_request_fn+0x172/0x230
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cc43>] scsi_get_serialnumber+0x93/0x1b0
[<c023c852>] scsi_get_evpd_page+0xe2/0x120
[<c023ceeb>] scsi_load_identifier+0xeb/0xf0
[<c023d248>] scsi_add_lun+0x158/0x220
[<c023d3b9>] scsi_probe_and_add_lun+0xa9/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18

error in initcall at 0xc0391ad0: returned with preemption imbalance
Attached scsi removable disk sda at scsi0, channel 0, id 6, lun 0


>I've been sitting on it for a while, waiting for someone to tell me if the
>ppa driver actually works. Perhaps that person is you?
>
>
>
When trying to mount a zip disk, the mount process gets stuck:

[root@viper root]# mount -t ext2 /dev/sda1 /mnt/zip
SCSI device sda: 196608 512-byte hdwr sectors (101 MB)
sda: Write Protect is off
sda: cache data unavailable
sda: assuming drive cache: write through
SCSI device sda: 196608 512-byte hdwr sectors (101 MB)
sda: Write Protect is off
sda: cache data unavailable
sda: assuming drive cache: write through

At this point the mount process is unkillable.
Also strange is that the messages are printed twice.

Gert




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:34    [W:0.088 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site