lkml.org 
[lkml]   [2003]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: NForce2 pseudoscience stability testing (2.6.0-test11)
Sorry, should've sent this CC'd to list first time (time to make some 
more coffee :)


-------- Original Message --------
Subject: Re: NForce2 pseudoscience stability testing (2.6.0-test11)
Date: Thu, 04 Dec 2003 12:38:21 +0000
From: Dan Creswell <dan@dcrdev.demon.co.uk>
To: b@netzentry.com
References: <3FCF25F2.6060008@netzentry.com>



b@netzentry.com wrote:

> Dan Creswell wrote:
>
> Thanks for the input, I'll pass it to the list.
>
You're welcome.

> Most of these Athlon victims are UP users, in fact, I
> believe they are exclusively UP. Does MPS 1.1/1.4 play a role
> in a UP system ever? I dont think the NForce2 chipset,

No, MPS shouldn't matter on a UP system.

> where we are seeing these hard hangs (no ping, no screen,
> no blinking cursor, no toggling the caps lock, nothing) is
> capable of SMP operation.
>
> Now whats interesting is you finger the IDE as a potential
> culprit and think its very low level. Interesting.
>
Well, I actually finger heavy duty disk access - my system locks under
*SCSI* load (via a PCI-card - the motherboard doesn't have built in
SCSI), I've not had it happen with my CDROM which is on the IDE
subsystem. This leads me to my conclusion in respect of interrupt
load. It seems to be an issue with simultaneous interrupts from another
source but that's subjective......

> By the way, I've had trouble with SMP on a Tyan board with an
> i840 chipset with Linux before - I was never able to resolve
> the issue and had to return the board.
>
Interesting - I've had a number of Tyan boards and this is the first one
I've had any issues with. What bugs me more is that 2.4 seems fine
(caveat 2.4.23-rc5 - wondering if the ACPI changes here are back-ported
from 2.6) whilst 2.6 is horrid. This is the only thing changing in the
system which implies that something different goes on in 2.6 from 2.4
and that it break's things. Now it could be 2.6 is using some
additional features - but the problem (once located) would be simply
removed by providing an "off" switch to stop usage of those features.

> I've beaten on an Intel SR1300 and SR2300 dual Xeon (aka
> Micron's Netframe 1610/2610 aka Sun 60x / 65x) and never run
> into these hangs with kernels up to 2.4.22. The motherboard
> is an Intel SE7501WV2 .
>
Okay - well my Tyan also runs on kernels up to 2.4.22 no problem -
useful information though.

Thanks,

Dan.



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:1.153 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site