Messages in this thread | | | Subject | [OOPS] 2.4.23 USB ethernet oops | From | Harm Verhagen <> | Date | 04 Dec 2003 00:37:43 +0100 |
| |
Booting into 2.4.23 I saw the following oops going over my screen.
[1.] One line summary of the problem: Booting 2.4.23 oopsed in usb ethernet. (kaweth)
[2.]Full description of the problem/report: During boot an oops went over my screen. Other than that the system booted OK. (I'm writing this mail now with it)
I never saw this oops in previous kernels. I did boot 2.4.23 before (once) without seeing any oops
[4.] Kernel version (from /proc/version): Linux version 2.4.23 (root@node-d-8d2e.a2000.nl) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #2 Sun Nov 30 00:32:10 CET 2003
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
**** some dmesg output ****
ip_tables: (C) 2000-2002 Netfilter core team eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ip_tables: (C) 2000-2002 Netfilter core team hub.c: new USB device 00:09.0-2, assigned address 3 kaweth.c: Kawasaki Device Probe (Device number:3): 0x1485:0x0001:0x0208 kaweth.c: Device at cf15e600 kaweth.c: Descriptor length: 12 type: 1 kaweth.c: Resetting. kaweth.c: kaweth_reset(cf044800) kaweth.c: kaweth_control() kaweth.c: kaweth_reset() returns 0. kaweth.c: Firmware present in device. kaweth.c: Reading kaweth configuration kaweth.c: kaweth_control() kaweth.c: Statistics collection: 13fbffff kaweth.c: Multicast filter limit: 80 kaweth.c: MTU: 1514 kaweth.c: Read MAC address 00:e0:ed:05:46:4c kaweth.c: Setting URB size to 1664 Unable to handle kernel paging request at virtual address 04000300 printing eip: d08a226e *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[<d08a226e>] Not tainted EFLAGS: 00010202 eax: 04000300 ebx: cf044800 ecx: cf15e600 edx: 00000300 esi: 00000680 edi: cf8c5ec9 ebp: cf044ee1 esp: cf8c5e6c ds: 0018 es: 0018 ss: 0018 Process khubd (pid: 74, stackpage=cf8c5000) Stack: cf044800 00000680 d08a46c2 00000040 00000680 00000000 00000bb8 00000000 00000bb8 cf044800 cf044ee2 d08a3408 cf044800 00000680 000000e0 000000ed 00000005 00000046 0000004c c01512e5 cec9a480 20000203 cffd43d8 ffffffff Call Trace: [<d08a46c2>] [<d08a3408>] [<c01512e5>] [<d08a6850>] [<d08a6900>] [<d0838db6>] [<d08a6850>] [<d08a68e0>] [<d084ab80>] [<d0839215>] [<d083b48d>] [<d083d041>] [<d083cbac>] [<d083d438>] [<d083d4c6>] [<d083d490>] [<c01057ae>] [<d083d490>]
Code: c7 00 24 08 08 00 00 00 0f 00 d0 8d 43 38 81 ca 00 00 00 80 ip_tables: (C) 2000-2002 Netfilter core team parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
********* decoded oops **************** Unable to handle kernel paging request at virtual address 04000300 d08a226e *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[<d08a226e>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010202 eax: 04000300 ebx: cf044800 ecx: cf15e600 edx: 00000300 esi: 00000680 edi: cf8c5ec9 ebp: cf044ee1 esp: cf8c5e6c ds: 0018 es: 0018 ss: 0018 Process khubd (pid: 74, stackpage=cf8c5000) Stack: cf044800 00000680 d08a46c2 00000040 00000680 00000000 00000bb8 00000000 00000bb8 cf044800 cf044ee2 d08a3408 cf044800 00000680 000000e0 000000ed 00000005 00000046 0000004c c01512e5 cec9a480 20000203 cffd43d8 ffffffff Call Trace: [<d08a46c2>] [<d08a3408>] [<c01512e5>] [<d08a6850>] [<d08a6900>] [<d0838db6>] [<d08a6850>] [<d08a68e0>] [<d084ab80>] [<d0839215>] [<d083b48d>] [<d083d041>] [<d083cbac>] [<d083d438>] [<d083d4c6>] [<d083d490>] [<c01057ae>] [<d083d490>] Code: c7 00 24 08 08 00 00 00 0f 00 d0 8d 43 38 81 ca 00 00 00 80
>>EIP; d08a226e <[kaweth]kaweth_set_urb_size+5e/90> <=====
>>ebx; cf044800 <_end+ecb7aa8/10499328> >>ecx; cf15e600 <_end+edd18a8/10499328> >>edi; cf8c5ec9 <_end+f539171/10499328> >>ebp; cf044ee1 <_end+ecb8189/10499328> >>esp; cf8c5e6c <_end+f539114/10499328>
Trace; d08a46c2 <[kaweth].rodata.end+8d7/17f5> Trace; d08a3408 <[kaweth]kaweth_probe+338/550> Trace; c01512e5 <get_new_inode+145/160> Trace; d08a6850 <[kaweth]usb_klsi_table+230/2a8> Trace; d08a6900 <[kaweth]kaweth_driver+20/37> Trace; d0838db6 <[usbcore]usb_find_interface_driver+116/210> Trace; d08a6850 <[kaweth]usb_klsi_table+230/2a8> Trace; d08a68e0 <[kaweth]kaweth_driver+0/37> Trace; d084ab80 <[usbcore]usb_driver_list+0/0> Trace; d0839215 <[usbcore]usb_find_drivers+85/90> Trace; d083b48d <[usbcore]usb_new_device+15d/1d0> Trace; d083d041 <[usbcore]usb_hub_port_connect_change+161/280> Trace; d083cbac <[usbcore]usb_hub_port_status+6c/a0> Trace; d083d438 <[usbcore]usb_hub_events+2d8/330> Trace; d083d4c6 <[usbcore]usb_hub_thread+36/c0> Trace; d083d490 <[usbcore]usb_hub_thread+0/c0> Trace; c01057ae <arch_kernel_thread+2e/40> Trace; d083d490 <[usbcore]usb_hub_thread+0/c0>
Code; d08a226e <[kaweth]kaweth_set_urb_size+5e/90> 00000000 <_EIP>: Code; d08a226e <[kaweth]kaweth_set_urb_size+5e/90> <===== 0: c7 00 24 08 08 00 movl $0x80824,(%eax) <===== Code; d08a2274 <[kaweth]kaweth_set_urb_size+64/90> 6: 00 00 add %al,(%eax) Code; d08a2276 <[kaweth]kaweth_set_urb_size+66/90> 8: 0f 00 d0 lldt %ax Code; d08a2279 <[kaweth]kaweth_set_urb_size+69/90> b: 8d 43 38 lea 0x38(%ebx),%eax Code; d08a227c <[kaweth]kaweth_set_urb_size+6c/90> e: 81 ca 00 00 00 80 or $0x80000000,%edx
[7.] Environment [7.1.] Software (add the output of the ver_linux script here)
Linux node-d-8d2e.a2000.nl 2.4.23 #2 Sun Nov 30 00:32:10 CET 2003 i686 athlon i386 GNU/Linux Gnu C 3.2.2 Gnu make 3.79.1 util-linux 2.11y mount 2.11y modutils 2.4.22 e2fsprogs 1.32 jfsutils 1.0.17 reiserfsprogs 3.6.4 pcmcia-cs 3.1.31 quota-tools 3.06. PPP 2.4.1 isdn4k-utils 3.1pre4 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.11 Net-tools 1.60 Kbd 1.08 Sh-utils 4.5.3 Modules Loaded es1371 ac97_codec nvidia ipt_MASQUERADE ipt_state ipt_LOG ipt_REJECT ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp ip_conntrack parport_pc lp parport iptable_filter ip_tables ide-scsi ide-cd cdrom kaweth ntfs usb-storage sd_mod scsi_mod keybdev mousedev hid input usb-uhci ehci-hcd usbcore 3c59x 8139too
note: the nvidia driver listed above as loaded module was _not_ loaded, or had been loaded before the oops occurred ! The oops occurred when booting, only after the oops nvidia gets loaded (when starting X)
[7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 6 model name : AMD Athlon(TM) XP 1800+ stepping : 2 cpu MHz : 1532.941 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow bogomips : 3060.53
[7.3.] Module information (from /proc/modules): [root@node-d-8d2e root]# cat /proc/modules es1371 29224 0 (autoclean) ac97_codec 17064 0 (autoclean) [es1371] nvidia 1764896 11 (autoclean) ipt_MASQUERADE 2328 1 (autoclean) ipt_state 1048 3 (autoclean) ipt_LOG 4248 8 (autoclean) ipt_REJECT 4312 5 (autoclean) ip_nat_ftp 3664 0 (unused) iptable_nat 20568 2 [ipt_MASQUERADE ip_nat_ftp] ip_conntrack_irc 4080 0 (unused) ip_conntrack_ftp 5168 1 ip_conntrack 28808 4 [ipt_MASQUERADE ipt_state ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp] parport_pc 26728 1 (autoclean) lp 8096 0 (autoclean) parport 35968 1 (autoclean) [parport_pc lp] iptable_filter 2412 1 (autoclean) ip_tables 15328 8 [ipt_MASQUERADE ipt_state ipt_LOG ipt_REJECT iptable_nat iptable_filter] ide-scsi 12016 0 ide-cd 35392 0 cdrom 33280 0 [ide-cd] kaweth 18712 0 (unused) ntfs 58432 1 (autoclean) usb-storage 75072 0 sd_mod 12556 0 (autoclean) scsi_mod 99508 3 (autoclean) [ide-scsi usb-storage sd_mod] keybdev 2912 0 (unused) mousedev 5428 1 hid 24452 0 (unused) input 5664 0 [keybdev mousedev hid] usb-uhci 26092 0 (unused) ehci-hcd 19944 0 (unused) usbcore 78176 1 [kaweth usb-storage hid usb-uhci ehci-hcd] 3c59x 28752 1 8139too 16168 1
[ 7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) [root@node-d-8d2e root]# cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 a400-a41f : VIA Technologies, Inc. USB (#4) a400-a41f : usb-uhci a800-a81f : VIA Technologies, Inc. USB (#3) a800-a81f : usb-uhci b000-b00f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE b000-b007 : ide0 b008-b00f : ide1 b400-b43f : Ensoniq 5880 AudioPCI b400-b43f : es1371 b800-b87f : 3Com Corporation 3c905B 100BaseTX [Cyclone] b800-b87f : 00:0e.0 d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ d000-d0ff : 8139too d400-d41f : VIA Technologies, Inc. USB (#2) d400-d41f : usb-uhci d800-d81f : VIA Technologies, Inc. USB d800-d81f : usb-uhci [root@node-d-8d2e root]# cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-0fffbfff : System RAM 00100000-002a86fc : Kernel code 002a86fd-00336187 : Kernel data 0fffc000-0fffefff : ACPI Tables 0ffff000-0fffffff : ACPI Non-volatile Storage d4800000-d480007f : 3Com Corporation 3c905B 100BaseTX [Cyclone] d5000000-d50000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ d5000000-d50000ff : 8139too d5800000-d58000ff : VIA Technologies, Inc. USB 2.0 d5800000-d58000ff : ehci_hcd d6000000-d75fffff : PCI Bus #01 d6000000-d6ffffff : nVidia Corporation NV17 [GeForce4 MX 440] d7700000-dfffffff : PCI Bus #01 d7800000-d787ffff : nVidia Corporation NV17 [GeForce4 MX 440] d8000000-dfffffff : nVidia Corporation NV17 [GeForce4 MX 440] e0000000-e7ffffff : VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root) [root@node-d-8d2e root]# lspci -vv 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] Subsystem: Asustek Computer, Inc. A7V333 Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 Command: RQ=0 SBA- AGP+ 64bit- FW+ Rate=x4 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d6000000-d75fffff Prefetchable memory behind bridge: d7700000-dfffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:09.0 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin A routed to IRQ 5 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:09.1 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Interrupt: pin C routed to IRQ 10 Region 0: Memory at d5800000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d000 [size=256] Region 1: Memory at d5000000 (32-bit, non-prefetchable) [size=256] Expansion ROM at <unassigned> [disabled] [size=64K] 00:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at b800 [size=128] Region 1: Memory at d4800000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) Subsystem: Ensoniq Creative Sound Blaster AudioPCI128 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at b400 [size=64] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge Subsystem: Asustek Computer, Inc.: Unknown device 808c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc.: Unknown device 808c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 0 Region 4: I/O ports at b000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 808c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at a800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 808c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at a400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3) (prog-if 00 [VGA]) Subsystem: LeadTek Research Inc.: Unknown device 2870 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 2: Memory at d7800000 (32-bit, prefetchable) [size=512K] Expansion ROM at d77e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2,x4 Command: RQ=31 SBA- AGP+ 64bit- FW+ Rate=x4
-- Harm Verhagen <h.verhagen@chello.nl>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |