Messages in this thread | | | From | Stefano Rosellini <> | Subject | PROBLEM: Kernel 2.6.0 has a compilation error on "fs/proc/array.c" | Date | Sat, 27 Dec 2003 19:46:38 +0100 |
| |
[1.] Kernel 2.6.0 has a compilation error on "fs/proc/array.c"
[2.] When I compile kernel 2.6.0 with attached configuration, I get this error message: << CC fs/proc/array.o fs/proc/array.c: In function `proc_pid_stat': fs/proc/array.c:398: Unrecognizable insn: (insn/i 1334 1666 1660 (parallel[ (set (reg:SI 0 eax) (asm_operands ("") ("=a") 0[ (reg:DI 1 edx) ] [ (asm_input:DI ("A")) ] ("include/linux/times.h") 38)) (set (reg:SI 1 edx) (asm_operands ("") ("=d") 1[ (reg:DI 1 edx) ] [ (asm_input:DI ("A")) ] ("include/linux/times.h") 38)) (clobber (reg:QI 19 dirflag)) (clobber (reg:QI 18 fpsr)) (clobber (reg:QI 17 flags)) ] ) -1 (insn_list 1328 (nil)) (nil)) fs/proc/array.c:398: confused by earlier errors, bailing out make[2]: *** [fs/proc/array.o] Error 1 make[1]: *** [fs/proc] Error 2 make: *** [fs] Error 2 >>
[7.] ----- Environment -----
[7.1.] ver_linux output: << Linux athlon 2.4.23 #9 mer dic 24 18:06:23 CET 2003 i686 unknown
Gnu C 2.96 Gnu make 3.79.1 util-linux 2.11n mount 2.11n module-init-tools 2.4.13 e2fsprogs 1.26 reiserfsprogs 3.x.0j quota-tools 3.01. PPP 2.4.1 nfs-utils 0.3.3 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.60 Kbd [opzione...] Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded mga agpgart epat paride emu10k1 ac97_codec sound soundcore nfsd lockd sunrpc lp parport_pc parport af_packet keybdev mousedev hid input w83781d i2c-amd756 i2c-proc i2c-core scanner ipt_MASQUERADE ipt_REJECT ipt_state iptable_filter iptable_nat ip_conntrack ip_tables usb-ohci usbcore ne2k-pci 8390 crc32 3c509 ext2 nls_iso8859-15 nls_cp850 vfat fat ide-scsi scsi_mod rtc >>
[7.2.] CPU info: << processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 1 model name : AMD-K7(tm) Processor stepping : 2 cpu MHz : 499.037 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat mmx syscall mmxext 3dnowext 3dnow bogomips : 996.14 processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 1 model name : AMD-K7(tm) Processor stepping : 2 cpu MHz : 499.037 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat mmx syscall mmxext 3dnowext 3dnow bogomips : 996.14 >>
[7.3.] /proc/modules: << mga 92688 1 agpgart 13856 3 epat 6656 0 paride 3520 1 [epat] emu10k1 54080 2 ac97_codec 11840 0 [emu10k1] sound 53836 0 [emu10k1] soundcore 3588 7 [emu10k1 sound] nfsd 68576 8 (autoclean) lockd 48256 1 (autoclean) [nfsd] sunrpc 62804 1 (autoclean) [nfsd lockd] lp 6144 1 parport_pc 21256 1 parport 23040 1 [paride lp parport_pc] af_packet 12008 1 (autoclean) keybdev 1696 0 (unused) mousedev 3936 0 (unused) hid 20640 0 (unused) input 3360 0 [keybdev mousedev hid] w83781d 18336 0 (unused) i2c-amd756 3108 0 (unused) i2c-proc 6272 0 [w83781d] i2c-core 13888 0 [w83781d i2c-amd756 i2c-proc] scanner 10400 0 (unused) ipt_MASQUERADE 1376 1 (autoclean) ipt_REJECT 3200 1 (autoclean) ipt_state 576 5 (autoclean) iptable_filter 1664 1 (autoclean) iptable_nat 15508 1 [ipt_MASQUERADE] ip_conntrack 18740 2 [ipt_MASQUERADE ipt_state iptable_nat] ip_tables 11584 7 [ipt_MASQUERADE ipt_REJECT ipt_state iptable_filter iptable_nat] usb-ohci 18048 0 (unused) usbcore 63552 1 [hid scanner usb-ohci] ne2k-pci 4576 1 (autoclean) 8390 6176 0 (autoclean) [ne2k-pci] crc32 2912 0 (autoclean) [8390] 3c509 9504 1 (autoclean) ext2 32480 1 (autoclean) nls_iso8859-15 3328 4 (autoclean) nls_cp850 3552 4 (autoclean) vfat 9660 4 (autoclean) fat 29944 0 (autoclean) [vfat] ide-scsi 9088 0 scsi_mod 92348 1 [ide-scsi] rtc 6044 0 (autoclean) >>
[7.4.] /proc/ioports: << 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0213-0213 : isapnp read 0220-022f : 3c509 PnP 02f8-02ff : serial(auto) 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0a79-0a79 : isapnp write 0cf8-0cff : PCI conf1 50e0-50ef : amd756-smbus e000-e003 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller e400-e41f : Realtek Semiconductor Co., Ltd. RTL-8029(AS) e400-e41f : ne2k-pci e800-e81f : Creative Labs SB Live! EMU10k1 e800-e81f : EMU10K1 ec00-ec07 : Creative Labs SB Live! MIDI/Game Port f000-f00f : Advanced Micro Devices [AMD] AMD-756 [Viper] IDE f000-f007 : ide0 f008-f00f : ide1 >> /proc/iomem: << 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-17feffff : System RAM 00100000-0022512f : Kernel code 00225130-00299e1f : Kernel data 17ff0000-17ff2fff : ACPI Non-volatile Storage 17ff3000-17ffffff : ACPI Tables d8000000-dbffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller dc000000-dfffffff : PCI Bus #01 dc000000-dc003fff : Matrox Graphics, Inc. MGA G400 AGP dd000000-dd7fffff : Matrox Graphics, Inc. MGA G400 AGP e0000000-e1ffffff : PCI Bus #01 e0000000-e1ffffff : Matrox Graphics, Inc. MGA G400 AGP e3000000-e3000fff : Advanced Micro Devices [AMD] AMD-756 [Viper] USB e3000000-e3000fff : usb-ohci e3001000-e3001fff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller ffff0000-ffffffff : reserved >>
[7.5.] lspci -vvv: << 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 23) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at e3001000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at e000 [disabled] [size=4] Capabilities: [a0] AGP version 1.0 Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dc000000-dfffffff Prefetchable memory behind bridge: e0000000-e1ffffff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev 03) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (rev 06) (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (20000ns max), cache line size 08 Interrupt: pin D routed to IRQ 9 Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at e400 [size=32] Expansion ROM at e2000000 [disabled] [size=16K]
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06) Subsystem: Creative Labs CT4832 SBLive! Value Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e800 [size=32] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 Input device controller: Creative Labs SB Live! (rev 06) Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 0: I/O ports at ec00 [size=8] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SGRAM Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 8000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [f0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=15 SBA+ AGP+ 64bit- FW- Rate=x1
>>
[7.6.] /proc/scsi/scsi: << Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: Model: CRW9420 Rev: 1.40 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: LG Model: CD-ROM CRD-8521B Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 >>
[x.] The kernel I used is the standard one: I've applied no patches.
Thanks for your attention.
Stefano Rosellini steros@infinito.it [unhandled content-type:application/x-bzip2] | |