Messages in this thread | | | Date | Sun, 30 Nov 2003 19:41:06 +0100 | From | Luis Miguel García <> | Subject | Re: Silicon Image 3112A SATA trouble |
| |
so definitely, 32 MB/s is almost half the speed that you get. I'm in 2.6-test11. I don't know more options to try. The next will be booting with "noapic nolapic". Some people reported better results with this.
by the way, I have booted with "doataraid noraid" (no drives connected, only SATA support in bios), and nothing is shown in the boot messages (nor dmesg) about libata being loaded. I don't know if I must connect a hard drive and then the driver shows up, but I don't think that.
Thanks!
LuisMi Garcia
Craig Bradney wrote:
> On the topic of speeds.. hdparm -t gives me 56Mb/s on my Maxtor 80Mb 8mb > cache PATA drive. I got that with 2.4.23 pre 8 which was ATA100 and get > just a little more on ATA133 with 2.6. Not sure what people are > expecting on SATA. > > Craig > > On Sun, 2003-11-30 at 18:52, Luis Miguel García wrote: > > >> hello: >> >> I have a Seagate Barracuda IV (80 Gb) connected to parallel ata on a >> nforce-2 motherboard. >> >> If any of you want for me to test any patch to fix the "seagate >> issue", please, count on me. I have a SATA sis3112 and a >> parallel-to-serial converter. If I'm of any help to you, drop me an >> email. >> >> By the way, I'm only getting 32 MB/s (hdparm -tT /dev/hda) on my >> actual parallel ata. Is this enough for an ATA-100 device? >> >> Thanks a lot. >> >> LuisMi García >> Spain >> >> - >> To unsubscribe from this list: send the line "unsubscribe >> linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ >> >> > > > > >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |