Messages in this thread | | | Date | Mon, 3 Nov 2003 13:07:36 +0100 | From | jfontain@free ... | Subject | success report: 2.4.23-pre9 on a recent bi-Xeon server |
| |
I am not subscribed to the list: please write me directly for any questions.
A short test show that the Apache/MySQL web server works as expected.
# dmesg
536k/1310656k available (1378k kernel code, 17712k reserved, 326k data, 268k init, 393152k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09 per-CPU timeslice cutoff: 1462.89 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4784.12 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09 Total of 2 processors activated (9555.14 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21, 9-22, 9-23, 10-0, 10-1, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7, 10-8, 10-9, 10-10, 10-11, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-19, 10-20, 10-21, 10-22, 10-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #8 registers: 24. number of IO-APIC #9 registers: 24. number of IO-APIC #10 registers: 24. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 1 1 0 0 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #9...... .... register #00: 09000000 ....... : physical APIC id: 09 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 09000000 ....... : arbitration: 09 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #10...... .... register #00: 0A000000 ....... : physical APIC id: 0A ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 0A000000 ....... : arbitration: 0A .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2392.3256 MHz. ..... host bus clock speed is 132.9068 MHz. cpu: 0, clocks: 1329068, slice: 443022 CPU0<T0:1329056,T1:886032,D:2,S:443022,C:1329068> cpu: 1, clocks: 1329068, slice: 443022 CPU1<T0:1329056,T1:443008,D:4,S:443022,C:1329068> checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle ACPI: Subsystem revision 20031002 PCI: PCI BIOS revision 2.10 entry at 0xfdb75, last bus=4 PCI: Using configuration type 1 ACPI-0560: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [GPEN] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [GPST] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [SBID] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0560: *** Warning: Type override - [SWCE] had invalid type (String) for Scope operator, changed to (Scope) IOAPIC[0]: Set PCI routing entry (8-9 -> 0x71 -> IRQ 9 Mode:1 Active:0) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 8) schedule_task(): keventd has not started ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P7._PRT] PCI: Probing PCI hardware IOAPIC[0]: Set PCI routing entry (8-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) 00:00:1d[A] -> 8-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (8-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1) 00:00:1d[B] -> 8-19 -> IRQ 19 Pin 8-16 already programmed IOAPIC[0]: Set PCI routing entry (8-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1) 00:00:1f[B] -> 8-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (8-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1) 00:00:1f[C] -> 8-18 -> IRQ 18 Pin 8-19 already programmed Pin 8-17 already programmed Pin 8-18 already programmed Pin 8-17 already programmed Pin 8-19 already programmed IOAPIC[1]: Set PCI routing entry (9-0 -> 0xc9 -> IRQ 24 Mode:1 Active:1) 00:03:08[A] -> 9-0 -> IRQ 24 IOAPIC[1]: Set PCI routing entry (9-3 -> 0xd1 -> IRQ 27 Mode:1 Active:1) 00:03:08[B] -> 9-3 -> IRQ 27 IOAPIC[1]: Set PCI routing entry (9-1 -> 0xd9 -> IRQ 25 Mode:1 Active:1) 00:03:08[C] -> 9-1 -> IRQ 25 IOAPIC[1]: Set PCI routing entry (9-2 -> 0xe1 -> IRQ 26 Mode:1 Active:1) 00:03:08[D] -> 9-2 -> IRQ 26 Pin 9-3 already programmed IOAPIC[1]: Set PCI routing entry (9-4 -> 0xe9 -> IRQ 28 Mode:1 Active:1) 00:03:09[B] -> 9-4 -> IRQ 28 IOAPIC[1]: Set PCI routing entry (9-5 -> 0x32 -> IRQ 29 Mode:1 Active:1) 00:03:09[C] -> 9-5 -> IRQ 29 Pin 9-0 already programmed Pin 9-4 already programmed Pin 9-5 already programmed Pin 9-0 already programmed Pin 9-3 already programmed IOAPIC[1]: Set PCI routing entry (9-6 -> 0x3a -> IRQ 30 Mode:1 Active:1) 00:03:07[A] -> 9-6 -> IRQ 30 IOAPIC[1]: Set PCI routing entry (9-7 -> 0x42 -> IRQ 31 Mode:1 Active:1) 00:03:07[B] -> 9-7 -> IRQ 31 IOAPIC[2]: Set PCI routing entry (10-0 -> 0x4a -> IRQ 48 Mode:1 Active:1) 00:04:08[A] -> 10-0 -> IRQ 48 IOAPIC[2]: Set PCI routing entry (10-3 -> 0x52 -> IRQ 51 Mode:1 Active:1) 00:04:08[B] -> 10-3 -> IRQ 51 IOAPIC[2]: Set PCI routing entry (10-1 -> 0x5a -> IRQ 49 Mode:1 Active:1) 00:04:08[C] -> 10-1 -> IRQ 49 IOAPIC[2]: Set PCI routing entry (10-2 -> 0x62 -> IRQ 50 Mode:1 Active:1) 00:04:08[D] -> 10-2 -> IRQ 50 Pin 10-3 already programmed IOAPIC[2]: Set PCI routing entry (10-4 -> 0x6a -> IRQ 52 Mode:1 Active:1) 00:04:09[B] -> 10-4 -> IRQ 52 IOAPIC[2]: Set PCI routing entry (10-5 -> 0x72 -> IRQ 53 Mode:1 Active:1) 00:04:09[C] -> 10-5 -> IRQ 53 Pin 10-0 already programmed Pin 10-4 already programmed Pin 10-5 already programmed Pin 10-0 already programmed Pin 10-3 already programmed Pin 10-2 already programmed Pin 10-1 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces Journalled Block Device driver loaded pty: 256 Unix98 ptys configured Intel(R) PRO/1000 Network Driver - version 5.2.16-k2 Copyright (c) 1999-2003 Intel Corporation. eth0: Intel(R) PRO/1000 Network Connection eth1: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hdc: SR244W, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10 <Adaptec AIC7902 Ultra320 SCSI adapter> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10 <Adaptec AIC7902 Ultra320 SCSI adapter> aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
blk: queue f7c9cc18, I/O limit 4095Mb (mask 0xffffffff) (scsi1:A:0): 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|QAS, 16bit) Vendor: SEAGATE Model: ST336607LC Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7c52c18, I/O limit 4095Mb (mask 0xffffffff) Vendor: ESG-SHV Model: SCA HSBP M16 Rev: 0.05 Type: Processor ANSI SCSI revision: 02 blk: queue f7c52018, I/O limit 4095Mb (mask 0xffffffff) scsi1:A:0:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB) Partition check: sda: sda1 sda2 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 268k freed Real Time Clock Driver v1.10e EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal Adding Swap: 11462368k swap-space (priority -1) e1000: eth0 NIC Link is Up 10 Mbps Half Duplex
-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |