Messages in this thread | | | Subject | Re: Linux 2.4.23-pre8 | Date | Wed, 29 Oct 2003 19:30:05 -0500 | From | chas williams <> |
| |
>Well, ATM dosen't work for me. (from 2.4.22, 2.4.21 is OK). >No traffic via ATM interfeces. > >[root@voices root]# ifconfig atm1 >atm1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00- >00-00 > inet addr:XXX.XX.XX.XXX Mask:255.255.255.252 > UP RUNNING MTU:9180 Metric:1 > RX packets:9 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:632 (632.0 b) TX bytes:100 (100.0 b)
this doesnt look bad. i see 1 tx packet and some rx packets. how did you test this interface? does tcpdump show anything? could you be more specific about this configuration so i could try to duplicate your setup? the nicstar driver seems to work for me in the 2.4.23-pre8 kernel (ilmid, signalling). i tested the clip module as well but that was via an arp server not clip over a pvc.
>Counters on all atm interfeces are still the same
what does atmdiag show?
>On good working kernel, during boot, i have messages like this: > >atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5) >atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5) >atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5) >atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5) >atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
these message were eliminated since they arent very useful and quite noisy. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |