lkml.org 
[lkml]   [2003]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH, CFT] remove cli from 3c527
Hi,

attached is a cleanup for the 3c527 driver: cli is gone, the driver must
be converted to use a spinlock. I wrote it some time ago, but didn't
send to Linus due to lack of hardware to test.

Anyone around who has the hardware and could make a quick test run?
Preferable without CONFIG_SMP and with CONFIG_DEBUG_SPINLOCK.

--
Manfred

--- 2.6/drivers/net/3c527.c 2003-06-17 06:20:03.000000000 +0200
+++ build-2.6/drivers/net/3c527.c 2003-08-31 19:26:37.000000000 +0200
@@ -100,6 +100,7 @@
#include <linux/string.h>
#include <linux/wait.h>
#include <linux/ethtool.h>
+#include <linux/spinlock.h>

#include <asm/uaccess.h>
#include <asm/system.h>
@@ -179,6 +180,7 @@
u16 tx_ring_head; /* index to tx en-queue end */

u16 rx_ring_tail; /* index to rx de-queue end */
+ spinlock_t lock;
};

/* The station (ethernet) address prefix, used for a sanity check. */
@@ -579,6 +581,27 @@
return 0;
}

+/**
+ * wait_exec_pending - sleep until exec_pending reaches a certain value
+ * @lp: m32_local structure describing the target card
+ * @value: value to wait for
+ *
+ * The caller must acquire lp->lock before calling this function, it
+ * temporarily drops the lock when it sleeps.
+ */
+
+static void wait_exec_pending(struct mc32_local *lp, int value)
+{
+ while (lp->exec_pending != value) {
+ DEFINE_WAIT(wait);
+
+ prepare_to_wait(&lp->event, &wait, TASK_UNINTERRUPTIBLE);
+ spin_unlock_irq(&lp->lock);
+ schedule();
+ finish_wait(&lp->event, &wait);
+ spin_lock_irq(&lp->lock);
+ }
+}

/**
* mc32_command - send a command and sleep until completion
@@ -619,14 +642,11 @@
int ret = 0;

/*
- * Wait for a command
+ * Wait until there are no more pending commands
*/

- save_flags(flags);
- cli();
-
- while(lp->exec_pending)
- sleep_on(&lp->event);
+ spin_lock_irqsave(&lp->lock, flags);
+ wait_exec_pending(lp, 0);

/*
* Issue mine
@@ -634,7 +654,7 @@

lp->exec_pending=1;

- restore_flags(flags);
+ spin_unlock_irqrestore(&lp->lock, flags);

lp->exec_box->mbox=0;
lp->exec_box->mbox=cmd;
@@ -645,13 +665,10 @@
while(!(inb(ioaddr+HOST_STATUS)&HOST_STATUS_CRR));
outb(1<<6, ioaddr+HOST_CMD);

- save_flags(flags);
- cli();
-
- while(lp->exec_pending!=2)
- sleep_on(&lp->event);
+ spin_lock_irqsave(&lp->lock, flags);
+ wait_exec_pending(lp, 2);
lp->exec_pending=0;
- restore_flags(flags);
+ spin_unlock_irqrestore(&lp->lock, flags);

if(lp->exec_box->mbox&(1<<13))
ret = -1;
\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.032 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site