Messages in this thread | | | Subject | RE: USB mass storage device - jumpdrive 2.0 pro - linux driver | Date | Wed, 15 Oct 2003 09:09:14 -0400 | From | "Chandra Konakalla" <> |
| |
Hello Greg,
Thanks for the response.
No I do not have sd module in the /dev
I have the following ...
root@10.0.0.147:/dev# ls console kmem mtd4 mtdblock3 ram12 spi fpga lcd mtd5 mtdblock4 ram13 tty fpga0 loop0 mtd6 mtdblock5 ram14 tty0 fpga1 loop1 mtd7 mtdblock6 ram15 tty1 gpio mem mtd8 mtdblock7 ram16 tty2 gpio0 mtd0 mtd9 mtdblock8 ram2 tty3 i2c-0 mtd1 mtdblock0 mtdblock9 ram3 tty4 i2c-1 mtd10 mtdblock1 null ram4 ttyS0 i2c-2 mtd11 mtdblock10 port ram5 ttyS1 i2c-3 mtd12 mtdblock11 ptmx ram6 urandom i2c-4 mtd13 mtdblock12 pts ram7 zero i2c-5 mtd14 mtdblock13 ram0 ram8 i2c-6 mtd15 mtdblock14 ram1 ram9 i2c-7 mtd2 mtdblock15 ram10 random initctl mtd3 mtdblock2 ram11 rtc
root@10.0.0.147:~# dmesg usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x53425355 T 0xa R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 00 00 usb-storage: Bulk command S 0x43425355 T 0xb Trg 0 LUN 0 L 134217728 F 128 CL 10 usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_transfer_partial(): xfer 8 bytes usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8 usb-storage: usb_stor_transfer_partial(): transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x53425355 T 0xb R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. SCSI device sda: 503808 512-byte hdwr sectors (258 MB) usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 00 00 usb-storage: Bulk command S 0x43425355 T 0xc Trg 0 LUN 0 L -16777216 F 128 CL 6 usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_transfer_partial(): xfer 255 bytes usb-storage: usb_stor_bulk_msg() returned 0 xferred 108/255 usb-storage: Bulk data transfer result 0x1 usb-storage: Attempting to get CSW... usb-storage: clearing endpoint halt for pipe 0xc0008280 usb-storage: usb_stor_clear_halt: result=0 usb-storage: Attempting to get CSW (2nd try)... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x53425355 T 0xc R -1828716544 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda: Write Protect is off Partition check: sda:<7>usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 00 00 usb-storage: Bulk command S 0x43425355 T 0xd Trg 0 LUN 0 L 1048576 F 128 CL 10 usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096 usb-storage: usb_stor_transfer_partial(): transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x53425355 T 0xd R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda1 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 usb.c: usb-storage driver claimed interface dcba84c0 hub.c: port 1, portstatus 103, change 0, 12 Mb/s
As I have mentioned in my previous mail shell have to have the end device driver i.e driver for the jumpdrive 2.0 device ??? Is it the reason why I am not have the sda in /dev ?? Please let me know if need to send more info...
Thanks for your help in advance.
Thanks Chandrasekhar Konakalla
-----Original Message----- From: Greg KH [mailto:greg@kroah.com] Sent: Tuesday, October 14, 2003 7:22 PM To: Chandra Konakalla Cc: linux-kernel@vger.kernel.org Subject: Re: USB mass storage device - jumpdrive 2.0 pro - linux driver
On Tue, Oct 14, 2003 at 05:51:38PM -0400, Chandra Konakalla wrote: > Hello > > I am using the above Lexar made jumpdrive 2.0 pro mass storage device > with my Host controller ISP 1161A. > > We are using Linux 2.4.21 with powePC environment. Following are the > console output results for different commands.
Do you have the sd module loaded?
thanks,
greg k-h --------------------------------------------------------
This email message and any files transmitted with it contain confidential information intended only for the person(s) to whom this email message is addressed. If you have received this email message in error, please notify the sender immediately by telephone or email and destroy the original message without making a copy. Thank you. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |