[lkml]   [2003]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2650 - tg3 on 2.4.18-19.7.xsmp rh7.3 ... OOPS YET AGAIN
On Thu, Jan 23, 2003 at 09:27:40AM +1000, Jacek Radajewski wrote:
> is the network card really the problem ? I don't want to be replacing all my network cards if the problem is elsewhere .... if you can understand the oops message please, please, please let me know where the problem is ...

You get oops messages? You're lucky - our PE 2650s would just lock up solid.
No oops message, no crash dumps (if we used a kernel with that patch), no
console messages, nothing. It would happen every 4-6 hours (and much sooner
when we tried a production-level amount of IO to the machine). At the time
we were using 2.4.18-18.7.x from RedHat 7.3.

Not sure if it was the network card (tg3) or the RAID adapter (aacraid). We
switched to 2.4.20, built with the same options (well, all that apply at any
rate) as the RedHat kernel. We haven't had a single problem since. You might
want to give that a try before replacing a pile of gigabit NICs....

Mike Shuey
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:32    [W:0.065 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site