Messages in this thread | | | From | Roy Sigurd Karlsbakk <> | Subject | Panic in 2.5.39 | Date | Sun, 29 Sep 2002 18:56:28 +0200 |
| |
hi all
Trying out 2.5.39 on an intel D845GLLY (or ws it D845GLAD) board, I get this cute little panic. Attached are lspci -vvv and .config.
roy
Unable to handle kernel paging request at virtual address 56112e2c dec84f28 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0060:[<dec84f28>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010207 eax: dec84f60 ebx: dec86820 ecx: dec86904 edx: dec86820 esi: 00000000 edi: c0302850 ebp: 00000001 esp: deedde1c ds: 0068 es: 0068 ss: 0068 Stack: c014ed99 dec86820 0000002d 00000000 0000002d c039c5c0 dec86820 c014f6f4 dec86820 dec86820 dec86820 c014f784 dec86820 dec80220 c014d866 dec86820 00002e87 c0118bff 00002e87 00002e87 deeed3a0 decc8c00 c0150ca2 dec80220 [<c014ed99>]clear_inode+0x69/0xb0 [<c014f6f4>]generic_forget_inode+0xe4/0x100 [<c014f784>]iput+0x54/0x60 [<c014d866>]dput+0xf6/0x150 [<c0118bff>]call_console_drivers+0xdf/0xf0 [<c0150ca2>]__mntput+0x12/0xe0 [<c0255c12>]usb_get_sb+0xe2/0xf0 [<c0118d83>]printk+0x103/0x110 [<c0255d48>]create_special_files+0x128/0x140 [<c0255e06>]usbfs_add_bus+0x16/0xe0 [<c024fd24>]usb_register_bus+0xf4/0x110 [<c0252ad2>]usb_hcd_pci_probe+0x372/0x3a0 [<c01aaf5d>]pci_device_probe+0x3d/0x60 [<c01e8c28>]probe+0x18/0x30 [<c01e8c94>]found_match+0x24/0x50 [<c01e8da5>]do_driver_attach+0x35/0x40 [<c01e953a>]bus_for_each_dev+0x4a/0x90 [<c01e8dc3>]driver_attach+0x13/0x20 [<c01e8d70>]do_driver_attach+0x0/0x40 [<c01e981a>]driver_register+0x5a/0x70 [<c01ab066>]pci_register_driver+0x36/0x50 [<c0246595>]cdrom_sysctl_register+0x15/0x70 [<c0105030>]init+0x0/0x160 [<c0105051>]init+0x21/0x160 [<c0105030>]init+0x0/0x160 [<c0107015>]kernel_thread_helper+0x5/0x10 Code: 00 88 cc de 48 77 7e c1 48 77 7e c1 00 a4 c8 de 80 81 40 40
----------------------------------------------------------------- bash-2.05# lspci -vvv 00:00.0 Class 0600: 8086:2560 (rev 01) Subsystem: 8086:2560 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] #09 [1105]
00:02.0 Class 0300: 8086:2562 (rev 01) Subsystem: 8086:4c59 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 Class 0c03: 8086:24c2 (rev 01) Subsystem: 8086:4c59 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at e800 [size=32]
00:1d.1 Class 0c03: 8086:24c4 (rev 01) Subsystem: 8086:4c59 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at e880 [size=32]
00:1d.2 Class 0c03: 8086:24c7 (rev 01) Subsystem: 8086:4c59 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 5 Region 4: I/O ports at ec00 [size=32]
00:1d.7 Class 0c03: 8086:24cd (rev 01) (prog-if 20) Subsystem: 8086:4c59 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 9 Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3h ot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [2080]
00:1e.0 Class 0604: 8086:244e (rev 81) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ff800000-ff8fffff Prefetchable memory behind bridge: e6a00000-e6afffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 Class 0601: 8086:24c0 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0
00:1f.1 Class 0101: 8086:24cb (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: 8086:4c59 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at <unassigned> [size=8] Region 1: I/O ports at <unassigned> [size=4] Region 2: I/O ports at <unassigned> [size=8] Region 3: I/O ports at <unassigned> [size=4] Region 4: I/O ports at ffa0 [size=16] Region 5: Memory at 1ff00000 (32-bit, non-prefetchable) [disabled] [size =1K]
00:1f.3 Class 0c05: 8086:24c3 (rev 01) Subsystem: 8086:4c59 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at e000 [size=32]
00:1f.5 Class 0401: 8086:24c5 (rev 01) Subsystem: 8086:0302 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at e400 [size=256] Region 1: I/O ports at e080 [size=64] Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3h ot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 Class 0180: 105a:4d68 (rev 02) (prog-if 85) Subsystem: 105a:4d68 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 4500ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: Memory at ff8fc000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at ff8f8000 [disabled] [size=16K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:01.0 Class 0180: 105a:4d68 (rev 02) (prog-if 85) Subsystem: 105a:4d68 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 4500ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at df00 [size=8] Region 3: I/O ports at de80 [size=4] Region 4: I/O ports at de00 [size=16] Region 5: Memory at ff8f4000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at ff8f0000 [disabled] [size=16K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:02.0 Class 0200: 8086:100e (rev 02) Subsystem: 8086:002e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 32 (63750ns min), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: Memory at ff8c0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at ff8a0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at dd80 [size=64] Expansion ROM at ff880000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device. Command: DPERE- ERO+ RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable - Address: 0000000000000000 Data: 0000
01:08.0 Class 0200: 8086:1039 (rev 81) Subsystem: 8086:3013 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at ff8ef000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at dd00 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
bash-2.05#
-- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356
Computers are like air conditioners. They stop working when you open Windows. # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # General setup # CONFIG_NET=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y
# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set CONFIG_M586=y # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_USE_STRING_486=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_PPRO_FENCE=y CONFIG_X86_F00F_BUG=y CONFIG_HUGETLB_PAGE=y # CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_X86_UP_APIC=y # CONFIG_X86_UP_IOAPIC is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y
# # Power management options (ACPI, APM) #
# # ACPI Support # CONFIG_ACPI=y # CONFIG_ACPI_HT_ONLY is not set CONFIG_ACPI_BOOT=y # CONFIG_ACPI_SLEEP is not set CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y # CONFIG_ACPI_SLEEP is not set CONFIG_ACPI_SYSTEM=y CONFIG_PM=y CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=y # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set
# # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y
# # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set
# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# # Executable file formats # CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # # CONFIG_PARPORT is not set
# # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # CONFIG_PNPBIOS is not set
# # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y
# # ATA/ATAPI/MFM/RLL device support # CONFIG_IDE=y
# # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_NFORCE=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_PDC202XX_OLD=y CONFIG_PDC202XX_BURST=y CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_PDC202XX_FORCE=y CONFIG_BLK_DEV_RZ1000=y # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set CONFIG_BLK_DEV_SIS5513=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_PDC202XX=y CONFIG_BLK_DEV_IDE_MODES=y
# # SCSI device support # # CONFIG_SCSI is not set
# # Old non-SCSI/ATAPI CD-ROM drives # # CONFIG_CD_NO_IDESCSI is not set
# # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set
# # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set
# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set
# # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set
# # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK_DEV is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set
# # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y CONFIG_IP_NF_FTP=y # CONFIG_IP_NF_IRC is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y # CONFIG_IP_NF_MATCH_MAC is not set # CONFIG_IP_NF_MATCH_PKTTYPE is not set # CONFIG_IP_NF_MATCH_MARK is not set CONFIG_IP_NF_MATCH_MULTIPORT=y # CONFIG_IP_NF_MATCH_TOS is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_DSCP is not set # CONFIG_IP_NF_MATCH_AH_ESP is not set # CONFIG_IP_NF_MATCH_LENGTH is not set # CONFIG_IP_NF_MATCH_TTL is not set # CONFIG_IP_NF_MATCH_TCPMSS is not set # CONFIG_IP_NF_MATCH_HELPER is not set # CONFIG_IP_NF_MATCH_STATE is not set # CONFIG_IP_NF_MATCH_CONNTRACK is not set # CONFIG_IP_NF_MATCH_UNCLEAN is not set # CONFIG_IP_NF_MATCH_OWNER is not set CONFIG_IP_NF_FILTER=y # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_TARGET_MIRROR is not set # CONFIG_IP_NF_NAT is not set # CONFIG_IP_NF_MANGLE is not set CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y # CONFIG_IP_NF_TARGET_TCPMSS is not set # CONFIG_IP_NF_ARPTABLES is not set CONFIG_IPV6=y
# # IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=y CONFIG_IP6_NF_MATCH_LIMIT=y # CONFIG_IP6_NF_MATCH_MAC is not set CONFIG_IP6_NF_MATCH_MULTIPORT=y # CONFIG_IP6_NF_MATCH_OWNER is not set # CONFIG_IP6_NF_MATCH_MARK is not set # CONFIG_IP6_NF_MATCH_LENGTH is not set # CONFIG_IP6_NF_MATCH_EUI64 is not set CONFIG_IP6_NF_FILTER=y CONFIG_IP6_NF_TARGET_LOG=y # CONFIG_IP6_NF_MANGLE is not set
# # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y CONFIG_IP_SCTP=y # CONFIG_SCTP_ADLER32 is not set CONFIG_SCTP_DBG_MSG=y CONFIG_SCTP_DBG_OBJCNT=y # CONFIG_ATM is not set CONFIG_VLAN_8021Q=y # CONFIG_LLC is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # Network device support # CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set CONFIG_VORTEX=y # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set CONFIG_8139CP=y # CONFIG_8139TOO is not set # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE_MMIO is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_NET_POCKET is not set
# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set
# # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set
# # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_WAN is not set
# # Tulip family network device support # # CONFIG_NET_TULIP is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA (infrared) support # # CONFIG_IRDA is not set
# # ISDN subsystem # # CONFIG_ISDN_BOOL is not set
# # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set
# # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set # CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set # CONFIG_GAMEPORT_CS461x is not set CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set # CONFIG_JOYSTICK_SIDEWINDER is not set # CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDDLER is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set # CONFIG_INPUT_JOYDUMP is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_TOUCHSCREEN_GUNZE is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set
# # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_MANY_PORTS is not set # CONFIG_SERIAL_8250_SHARE_IRQ is not set # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256
# # I2C support # # CONFIG_I2C is not set
# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set
# # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_SOFT_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_WDTPCI is not set # CONFIG_PCWATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_I810_TCO is not set # CONFIG_MIXCOMWD is not set # CONFIG_60XX_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set
# # Multimedia devices # # CONFIG_VIDEO_DEV is not set
# # File systems # # CONFIG_QUOTA is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y # CONFIG_ISO9660_FS is not set # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # CONFIG_XFS_FS is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set
# # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_TCP=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SMB_FS=y CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="iso8859-15" # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set
# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y
# # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set
# # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # CONFIG_MDA_CONSOLE is not set
# # Frame-buffer support # # CONFIG_FB is not set
# # Sound # # CONFIG_SOUND is not set
# # USB support # CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y CONFIG_USB_LONG_TIMEOUT=y CONFIG_USB_BANDWIDTH=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD_ALT=y # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_STORAGE is not set # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_HID_PID is not set # CONFIG_LOGITECH_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set
# # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SAFE_PADDED is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_SPEEDTOUCH is not set
# # Bluetooth support # # CONFIG_BLUEZ is not set
# # Kernel hacking # # CONFIG_SOFTWARE_SUSPEND is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_KALLSYMS=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y
# # Security options # CONFIG_SECURITY_CAPABILITIES=y
# # Library routines # # CONFIG_CRC32 is not set # CONFIG_ZLIB_INFLATE is not set # CONFIG_ZLIB_DEFLATE is not set CONFIG_X86_BIOS_REBOOT=y
| |