Messages in this thread | | | Subject | PROBLEM: kernel oopses | From | Joe Radinger <> | Date | 12 Aug 2002 12:15:42 +0200 |
| |
here comes my first kernel-bug-report.:
[1.] kernel oopses [2.] my kernel 2.4.19 oopsed today and galeon crashed [3.] kernel [4.] Linux version 2.4.19 (root@yoda.phion) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #2 Wed Aug 7 11:39:04 CEST 2002 [5.] oops: invalid operand: 0000 CPU: 0 EIP: 0010:[<c0131b10>] Tainted: PF Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00210286 eax: 00000000 ebx: c12ddd68 ecx: c02a0560 edx: 00000000 esi: 00000000 edi: 00000000 ebp: d266c38c esp: c6ef3e60 ds: 0018 es: 0018 ss: 0018 Process galeon-bin (pid: 7229, stackpage=c6ef3000) Stack: 00000000 00000001 c013291b c02a0560 001b8900 c148bd94 00000000 00000000 00000002 00000008 d266c38c c0127d78 00001b89 c6ef2000 00000000 001b8800 c0127de0 001b8800 00000001 408e3204 00000000 ce52dbe0 d754e3e0 c012825f Call Trace: [<c013291b>] [<c0127d78>] [<c0127de0>] [<c012825f>] [<d8979836>] [<d8979931>] [<d89a5a00>] [<c0115845>] [<d89a5a00>] [<d88cc5c2>] [<d88bc662>] [<c0109e0a>] [<d89a5a00>] [<c010a02d>] [<c01156b0>] [<c0108ad0>] Code: 0f 0b 5b 00 54 3f 26 c0 8b 15 10 56 30 c0 89 d8 29 d0 69 c0
>>EIP; c0131b10 <__free_pages_ok+30/290> <===== Trace; c013291b <read_swap_cache_async+4b/a0> Trace; c0127d78 <swapin_readahead+28/50> Trace; c0127de0 <do_swap_page+40/150> Trace; c012825f <handle_mm_fault+6f/f0> Trace; d8979836 <[NVdriver]__nvsym00528+102/244> Trace; d8979931 <[NVdriver]__nvsym00528+1fd/244> Trace; d89a5a00 <[NVdriver]nv_linux_devices+0/4e0> Trace; c0115845 <do_page_fault+195/4df> Trace; d89a5a00 <[NVdriver]nv_linux_devices+0/4e0> Trace; d88cc5c2 <[NVdriver]RmIsr+2e/4c> Trace; d88bc662 <[NVdriver]nv_kern_isr+1e/c8> Trace; c0109e0a <handle_IRQ_event+3a/70> Trace; d89a5a00 <[NVdriver]nv_linux_devices+0/4e0> Trace; c010a02d <do_IRQ+bd/f0> Trace; c01156b0 <do_page_fault+0/4df> Trace; c0108ad0 <error_code+34/40> Code; c0131b10 <__free_pages_ok+30/290> 00000000 <_EIP>: Code; c0131b10 <__free_pages_ok+30/290> <===== 0: 0f 0b ud2a <===== Code; c0131b12 <__free_pages_ok+32/290> 2: 5b pop %ebx Code; c0131b13 <__free_pages_ok+33/290> 3: 00 54 3f 26 add %dl,0x26(%edi,%edi,1) Code; c0131b17 <__free_pages_ok+37/290> 7: c0 8b 15 10 56 30 c0 rorb $0xc0,0x30561015(%ebx) Code; c0131b1e <__free_pages_ok+3e/290> e: 89 d8 mov %ebx,%eax Code; c0131b20 <__free_pages_ok+40/290> 10: 29 d0 sub %edx,%eax Code; c0131b22 <__free_pages_ok+42/290> 12: 69 c0 00 00 00 00 imul $0x0,%eax,%eax
1 warning issued. Results may not be reliable.
[6.] sorry, don't know how to trigger the bug [7.] Environment: [7.1.] Linux yoda.phion 2.4.19 #2 Wed Aug 7 11:39:04 CEST 2002 i686 unknown Gnu C 2.96 Gnu make 3.79.1 binutils 2.11.90.0.8 util-linux 2.11f mount 2.10r modutils 2.4.14 e2fsprogs 1.25 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.56 Console-tools 0.3.3 Sh-utils 2.0 Modules Loaded nls_cp437 vfat fat sg NVdriver vmnet vmmon ide-scsi nls_iso8859-1 8139too mii agpgart loop cmpci mousedev hid input usb-uhci usbcore
[7.2.] processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Celeron (Coppermine) stepping : 6 cpu MHz : 801.850 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1599.07
[7.3.] nls_cp437 5120 0 (autoclean) vfat 12604 0 (autoclean) fat 38264 0 (autoclean) [vfat] sg 31588 0 (autoclean) NVdriver 1070368 15 vmnet 22624 5 vmmon 23060 6 ide-scsi 9824 0 nls_iso8859-1 3520 5 (autoclean) 8139too 17184 1 (autoclean) mii 1980 0 (autoclean) [8139too] agpgart 31136 5 loop 10544 15 (autoclean) cmpci 35832 1 mousedev 5152 2 hid 21024 0 (unused) input 5728 0 [mousedev hid] usb-uhci 26468 0 (unused) usbcore 80928 1 [hid usb-uhci]
[7.4.] 00000000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000d4000-000d47ff : Extension ROM 000f0000-000fffff : System ROM 00100000-17feffff : System RAM 00100000-0025779e : Kernel code 0025779f-002d9537 : Kernel data 17ff0000-17ff2fff : ACPI Non-volatile Storage 17ff3000-17ffffff : ACPI Tables d0000000-d3ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] d4000000-d5ffffff : PCI Bus #01 d4000000-d4ffffff : nVidia Corporation Vanta [NV6] d6000000-d7ffffff : PCI Bus #01 d6000000-d7ffffff : nVidia Corporation Vanta [NV6] d9000000-d9000fff : Adaptec AHA-2940/2940W / AIC-7871 d9000000-d9000fff : aic7xxx d9001000-d90010ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C d9001000-d90010ff : 8139too ffff0000-ffffffff : reserved
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0330-0331 : cmpci Midi 0376-0376 : ide1 0388-038b : cmpci FM 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 d000-d00f : VIA Technologies, Inc. Bus Master IDE d000-d007 : ide0 d008-d00f : ide1 d400-d41f : VIA Technologies, Inc. UHCI USB d400-d41f : usb-uhci d800-d8ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C d800-d8ff : 8139too dc00-dcff : Adaptec AHA-2940/2940W / AIC-7871 e000-e0ff : C-Media Electronics Inc CM8738 e000-e0ff : cmpci
[7.5.] 00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev 44) Subsystem: Elitegroup Computer Systems: Unknown device 0954 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x2
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: d4000000-d5ffffff Prefetchable memory behind bridge: d6000000-d7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Apollo PRO] (rev 23) Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- Fast Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR Latency: 32 Region 4: I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 11) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 Host bridge: VIA Technologies, Inc.: Unknown device 3050 (rev 30) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) Subsystem: Surecom Technology EP-320X-R Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 12 Region 0: I/O ports at d800 [size=256] Region 1: Memory at d9001000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 SCSI storage controller: Adaptec AHA-294x / AIC-7871 (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR Latency: 32 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at dc00 [disabled] [size=256] Region 1: Memory at d9000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]
00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR Latency: 32 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at e000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- Fast Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2 Command: RQ=7 SBA- AGP+ 64bit- FW- Rate=x2
[7.6.] Attached devices: Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: YAMAHA Model: CRW8824S Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: LITE-ON Model: LTR-32123S Rev: XS06 Type: CD-ROM ANSI SCSI revision: 02
[7.7.] my kernel is a patched one: i use the preemptive kernel patch and have risen the standard number of available loop-devices to 250.
yours josef
[unhandled content-type:application/pgp-signature] | |