lkml.org 
[lkml]   [2002]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Linux Kernel 2.4.18 and 2.4.19 problems
Fabio Massimo Di Nitto:
> I have an HSG80 connected on the other side and I got this problem with
> the beta6 drivers from qlogic.
> The only way I made it working was using the kernel driver shipped with
> rh7.3
> that has been modified to support the HSG80 (according to the changelog
> supported
> only by the beta6 series).

I find it odd if it's the driver, to be honest. Cause we've been running
with everything from 4.x-series, 5.x-series and 6.x-series on our current
in-production-system. This also runs linux vanilla, although with qla
driver patched in-kernel. (Currently 2.4.18 running).

So, the only differense between the new and old setup is:
* Dell 2550 in old vs 2650 in new (2xP3 vs 2xP4 Xeon)
* Old servers mount one disk each (and have only one HBA), but
the new servers are supposed to have two HBAs, and have one
disk on each HBA.

I don't see any good reason why this should result in no disks found
whatsoever.

--
Thomas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:27    [W:1.356 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site