Messages in this thread | ![/](/images/icornerl.gif) | | Date | Mon, 24 Jun 2002 00:48:34 -0700 (PDT) | From | Zak Shaf <> | Subject | slimscsi 1480 on dell inspiron 5000, crashing |
| |
Hi,
As per the instructions in PCMCIA-HOMTO, after recompiling the latest kernel with SCSI options, and installing the modules from the latest pcmcia-cs package, my machine appears to detect the scsi controller and the devices on them.
However, there are two aspects which are worrisome. In my dmesg, I get an error message - "aic7xxx: PCI6:0:0 MEM region 0x60050000 unavailable. Cannot map device."
and the machine crashes frequently, after kernel goes into panic.
any hints/pointers would be much appreciated. zak
ps: the complete dmesg relevant dmesg output is attached below.
Linux version 2.5.0 (zak@puma) (gcc version 2.95.3 20010315 (release)) #2 Sun Ju n 23 14:03:45 EDT 2002 ...PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI: Found IRQ 11 for device 00:04.0 PCI: Sharing IRQ 11 with 00:04.1 PCI: Sharing IRQ 11 with 01:00.0 PCI: Cannot allocate resource region 4 of device 00:07.1 Limiting direct PCI/PCI transfers. ... maestro: version 0.15 time 13:59:10 Jun 23 2002 PCI: Found IRQ 5 for device 00:08.0 PCI: Sharing IRQ 5 with 00:07.2 PCI: Sharing IRQ 5 with 00:10.0 ... Intel ISA/PCI/CardBus PCIC probe: PCI: Found IRQ 11 for device 00:04.0 PCI: Sharing IRQ 11 with 00:04.1 PCI: Sharing IRQ 11 with 01:00.0
TI 1225 rev 01 PCI-to-CardBus at slot 00:04, mem 0x10000000 host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 2/5] host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 6/9] ISA irqs (scanned) = 3,4,7,10 PCI status changes cs: cb_alloc(bus 2): vendor 0x10b7, device 0x5257 cs: cb_alloc(bus 6): vendor 0x9004, device 0x6075 3c59x.c:v0.99Q 5/16/2000 Donald Becker, becker@scyld.com http://www.scyld.com/network/vortex.html cs: cb_config(bus 2) cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x04d8-0x04ff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0a00-0x0aff: clean. cs: IO port probe 0x0c00-0x0cff: clean. fn 0 bar 1: io 0x200-0x27f fn 0 bar 2: mem 0x60021000-0x6002107f fn 0 bar 3: mem 0x60020000-0x6002007f fn 0 rom: mem 0x60000000-0x6001ffff irq 11 cs: cb_enable(bus 2) bridge mem map 0 (flags 0x1): 0x60000000-0x60021fff vortex_attach(device 02:00.0) eth0: 3Com 3CCFE575CT Tornado CardBus at 0x200, 00:01:02:7b:2f:1b, IRQ 11 product code 'ZW' rev 10.0 date 10-17-00 eth0: CardBus functions mapped 60020000->c8c81000. 8K byte-wide RAM 5:3 Rx:Tx split, MII interface. MII transceiver found at address 0, status 7809. Enabling bus-master transmits and whole-frame receives. ROM image dump: image 0: 0x000000-0x0001ff, signature PCIR image 1: 0x000200-0x0003ff, signature PCIR SCSI subsystem driver Revision: 1.00 cs: cb_config(bus 6) fn 0 bar 1: io 0x800-0x8ff fn 0 bar 2: mem 0x60050000-0x60050fff fn 0 rom: mem 0x60040000-0x6004ffff irq 11 cs: cb_enable(bus 6) bridge io map 0 (flags 0x21): 0x800-0x8ff bridge mem map 0 (flags 0x1): 0x60040000-0x60050fff apa1480_attach(device 06:00.0) aic7xxx: PCI6:0:0 MEM region 0x60050000 unavailable. Cannot map device. ahc_pci:6:0:0: Host Adapter Bios disabled. Using default SCSI device parameters
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 <Adaptec 1480A Ultra SCSI adapter> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: Nikon Model: LS-2000 Rev: 1.31 Type: Scanner ANSI SCSI revision: 02 Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 6 spurious 8259A interrupt: IRQ7.
__________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |